BS-EN-13913-2003.pdf
《BS-EN-13913-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13913-2003.pdf(60页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13913:2003 Railway applications Rubber suspension components Elastomer-based mechanical parts The European Standard EN 13913:2003 has the status of a British Standard ICS 45.040 ? BS EN 13913:2003 This British Standard was published under the authority of the Standards Policy
2、and Strategy Committee on 22 April 2003 BSI 22 April 2003 ISBN 0 580 41596 1 National foreword This British Standard is the official English language version of EN 13913:2003. The UK participation in its preparation was entrusted by Technical Committee RAE/3, Railway rolling stock material, to Subco
3、mmittee RAE/3/-/4, Suspension components, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document
4、may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. User
5、s are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change,
6、 and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 56, an inside back cover and a back cover. The BSI copyright date d
7、isplayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13913 April 2003 ICS 45.040 English version Railway applications - Rubber suspension components - Elastomer-based mech
8、anical parts Applications ferroviaires - Pices de suspension base dlastomre - Pices mcaniques base dlastomre Bahnanwendungen - Elastomer-Federungselemente - Mechanische Bauteile auf Elastomerbasis This European Standard was approved by CEN on 18 December 2002. CEN members are bound to comply with th
9、e CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or
10、to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions
11、. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARD
12、IZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13913:2003 E EN 13913:2003 (E) 2 Contents page Forewor
13、d5 Introduction.6 1Scope 7 2Normative references 8 3Terms, definitions, symbols and abbreviations .8 3.1Terms and definitions8 3.2Symbols and abbreviations9 3.3Three dimensional definition of characteristics.12 4Definition documents 15 4.1Introduction15 4.2Documents to be provided by the customer.15
14、 4.3Documents to be provided by the supplier.15 5Conditions of utilisation15 5.1Environmental conditions.15 5.2Operating temperatures16 5.3Operating conditions.16 5.4Recycling16 6Definition of the product.16 6.1General16 6.1.1Definition of characteristics16 6.1.2Mounting conditions16 6.1.3Ambient co
15、nditions .16 6.2Resistance to environmental conditions.18 6.2.1General18 6.2.2Low temperature18 6.2.3High temperature .18 6.2.4Ozone19 6.2.5Oil and petroleum products19 6.2.6Chemical products.19 6.2.7Abrasion19 6.2.8Fire behaviour 20 6.2.9Corrosion20 6.2.10Other conditions 20 6.3Resistance to operat
16、ing conditions.20 6.3.1Fatigue resistance .20 6.3.2Static creep.21 6.3.3Dynamic creep21 6.3.4Static relaxation .21 6.3.5Dynamic relaxation21 6.3.6Other conditions 21 6.4Physical characteristics21 6.4.1Materials21 6.4.2Mass21 6.5Geometrical and dimensional characteristics21 6.5.1Space envelope21 6.5.
17、2Dimensions.21 6.6Functional characteristics 22 6.6.1Dimensions under load.22 EN 13913:2003 (E) 3 6.6.2Force under deformation 22 6.6.3Characteristics force as a function of displacement at constant velocity .22 6.6.4Stiffnesses under sinusoidal motion.25 6.6.5Damping27 7Inspection and test methods2
18、8 7.1General28 7.1.1General test conditions.28 7.1.2Instrumentation29 7.1.3Definition and preparation of test pieces29 7.2Resistance to environmental conditions.29 7.2.1General29 7.2.2Low temperature29 7.2.3High temperature.29 7.2.4Ozone29 7.2.5Oil and petroleum products30 7.2.6Chemical products.30
19、7.2.7Abrasion .30 7.2.8Fire behaviour30 7.2.9Corrosion30 7.2.10Other conditions30 7.3Resistance to operating conditions.30 7.3.1Fatigue resistance .30 7.3.2Static creep.31 7.3.3Dynamic creep .33 7.3.4Static relaxation.34 7.3.5Dynamic relaxation35 7.3.6Other conditions35 7.4Physical characteristics35
20、 7.4.1Materials .35 7.4.2Mass35 7.5Geometrical and dimensional characteristics36 7.5.1Space envelope36 7.5.2Dimensions.36 7.6Functional characteristics 36 7.6.1Dimensions under load.36 7.6.2Force under deformation 37 7.6.3Characteristics force as a function of displacement at constant velocity .38 7
21、.6.4Stiffnesses under sinusoidal motion.40 7.6.5Damping43 8Marking.44 Annex A (informative) Design of the test devices and analysis of the parasitic deformations during stiffness measurements45 A.1Design of the test devices 45 A.2Analysis of the parasitic deformations45 Annex B (informative) Example
22、s of fatigue test programme.46 B.1Object46 B.2“Staircase“ method46 B.2.1Test principle46 B.2.2Results48 Programmed blocks method48 B.3.1Line test 48 B.3.2Loads distribution48 B.3.3Blocks .48 B.3.4Sequence48 B.3.5Test principle49 B.3.6Results50 Annex C (informative) Recommended tolerances and accepta
23、nce criteria to characteristics of components51 EN 13913:2003 (E) 4 C.1Object51 C.2Tolerances and acceptance criteria.51 Annex D (informative) Recommended measurement velocities .53 Annex E (informative) Traceability, qualification and quality surveillance54 E.1Traceability.54 E.2Supplier production
24、 plant qualification.54 E.3Approval and qualification of the product 54 E.3.1Approval54 E.3.2Qualification .54 E.4Inspection and quality surveillance.55 Bibliography56 EN 13913:2003 (E) 5 Foreword This document (EN 13913:2003) has been prepared by Technical Committee CEN/TC 256 “Railway applications
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13913 2003
链接地址:https://www.31doc.com/p-3738587.html