BS-EN-10264-4-2002.pdf
《BS-EN-10264-4-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-10264-4-2002.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10264-4:2002 Steel wire and wire products Steel wire for ropes Part 4: Stainless steel wire The European Standard EN 10264-4:2002 has the status of a British Standard ICS 77.140.20; 77.140.65 ? Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 03:54:40 GMT+00:00 2006, Unc
2、ontrolled Copy, (c) BSI BS EN 10264-4:2002 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 30 August 2002 BSI 30 August 2002 ISBN 0 580 40312 2
3、 National foreword This British Standard is the official English language version of EN 10264-4:2002. The UK participation in its preparation was entrusted to Technical Committee ISE/26, Steel wire, which has the responsibility to: A list of organizations represented on this committee can be obtaine
4、d on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of
5、the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid e
6、nquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This
7、document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: she
8、ffieldun sheffieldun, na, Thu Oct 26 03:54:40 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10264-4 August 2002 ICS 77.140.20; 77.140.65 English version Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire Fils et produi
9、ts trfils en acier - Fils pour cbles - Partie 4: Fils trfils en acier inoxydable Stahldraht und Drahterzeugnisse - Stahldraht fr Seile - Teil 4: Draht aus nichtrostendem Stahl This European Standard was approved by CEN on 4 May 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regu
10、lations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This Eur
11、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the natio
12、nal standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPIS
13、CHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10264-4:2002 E Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 03:54:40 GMT+00:00 2006, Uncon
14、trolled Copy, (c) BSI EN 10264-4:2002 (E) 2 Contents page Foreword3 1Scope 4 2Normative references 4 3Designation of product4 4General conditions of manufacture .4 4.1Main steel grades and characteristic applications.4 4.2Chemical composition.5 4.3Surface condition.6 5Characteristics and requirement
15、s6 5.1Tensile strength .6 5.2Diameter tolerances.6 5.3Ductility.7 5.4Magnetic permeability.7 6Test methods7 6.1General7 6.2Dimension of wire7 6.3Tensile test .7 6.4Reverse bend test8 6.5Wrapping test.8 6.6Tensile test on knotted wire8 6.7Magnetic permeability.8 Licensed Copy: sheffieldun sheffieldun
16、, na, Thu Oct 26 03:54:40 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 10264-4:2002 (E) 3 Foreword This document EN 10264-4:2002 has been prepared by Technical Committee ECISS/TC 30 “Steel wires“, the secretariat of which is held by BSI. This European Standard shall be given the status of a nationa
17、l standard, either by publication of an identical text or by endorsement, at the latest by February 2003, and conflicting national standards shall be withdrawn at the latest by February 2003. This European Standard for wire for ropes is made up of the following parts: Part 1: General requirements. P
18、art 2: Cold drawn non alloy steel wire for ropes for general applications. Part 3: Cold drawn and cold shaped non alloy steel wire for high duty applications. Part 4: Stainless steel wire. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countr
19、ies are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Th
20、u Oct 26 03:54:40 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 10264-4:2002 (E) 4 1 Scope This Part of this European Standard specifies the characteristics of stainless steel wire for the manufacture of ropes that are exposed to corrosion and in some cases to a moderate temperature. This part of th
21、is European Standard specifies the following for stainless steel wire for ropes dimensional tolerances; mechanical characteristics; requirements relating to the chemical composition of the stainless steel wire; conditions to be satisfied by any coating. 2 Normative references This European Standard
22、incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to thi
23、s European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 10088-3, Stainless steels Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections f
24、or general purposes. EN 10095, Heat resisting steels and nickel alloys. EN 10218-1, Steel wire and wire products General Part 1: Test methods. EN 10264-1, Steel wire and wire products Steel wire for ropes Part 1: General requirements. ASTM A342, Standard test methods for permeability of feebly magne
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10264 2002
链接地址:https://www.31doc.com/p-3738608.html