BS-EN-15182-3-2007.pdf
《BS-EN-15182-3-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-15182-3-2007.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 15182-3:2007 Hand-held branchpipes for fire service use Part 3: Smooth bore jet and/or one fixed spray jet angle branchpipes PN 16 The European Standard EN 15182-3:2007 has the status of a British Standard ICS 13.220.10 ? Licensed Copy: London South Bank University, London Sou
2、th Bank University, Mon Apr 16 02:43:49 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 15182-3:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2007 BSI 2007 ISBN 978 0 580 50532 4 National foreword This British Standard was pu
3、blished by BSI. It is the UK implementation of EN 15182-3:2007. The UK participation in its preparation was entrusted by Technical Committee FSH/17, Fire brigade equipment, to Subcommittee FSH/17/1, Hydrants, hydrant systems, couplings and indicator plates. A list of organizations represented on FSH
4、/17/1 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since pub
5、lication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:43:49 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15182-3 February 2007 ICS 13.220.10 English Version Hand-held branchpipes for
6、fire service use - Part 3: Smooth bore jet and/or one fixed spray jet angle branchpipes PN 16 Lances main destines aux services dincendie et de secours - Partie 3: Lances jet plein et/ou une diffusion angle fixe PN 16 Strahlrohre fr die Brandbekmpfung - Teil 3: Strahlrohre mit Vollstrahl und/oder ei
7、nem unvernderlichen Sprhstrahlwinkel PN 16 This European Standard was approved by CEN on 23 December 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterati
8、on. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by transla
9、tion under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany,
10、 Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Man
11、agement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15182-3:2007: E Licensed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:43:49 GMT+00:00 2007,
12、Uncontrolled Copy, (c) BSI EN 15182-3:2007 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .4 4 Requirements.4 4.1 General4 4.2 Mechanical characteristics.4 4.3 Hydraulic characteristics5 4.4 Leak-tightness6 4.5 Hydrostatic requirements .7 5 Testing and proofs
13、.7 5.1 General7 5.2 Spray angle measurement7 5.3 Flow and throw test.7 5.4 Tightness test.8 5.5 Hydrostatic test8 Licensed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:43:49 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15182-3:2007 (E) 3 Foreword This European Sta
14、ndard (EN 15182-3:2007) has been prepared by Technical Committee CEN/TC 192 “Fire service equipment”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Augus
15、t 2007, and conflicting national standards shall be withdrawn at the latest by August 2007. EN 15182 consists of the following parts, under the general title Hand-held branchpipes for fire service use: Part 1: Common requirements; Part 2: Combination branchpipes PN 16; Part 3: Smooth bore jet and/or
16、 one fixed spray jet angle branchpipes PN 16; Part 4: High pressure branchpipes PN 40. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic,
17、 Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: London South Bank University, London South Ba
18、nk University, Mon Apr 16 02:43:49 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15182-3:2007 (E) 4 1 Scope In addition to the requirements given in EN 15182-1, this part of this European Standard applies to hand-held branchpipes with smooth bore jet and/or one fixed spray jet angle branchpipes PN 1
19、6, with a maximum flow rate of 1 000 l/min at a reference pressure of 6 bar (0,6 MPa). It deals with: safety requirements; performance requirements; test methods; classification and designation; information for use; marking and maintenance. This part of this European Standard applies to branchpipes
20、as defined in Annex A of EN 15182-1:2007. NOTE 1 These branchpipes offer no or inadequate protection for firefighters when the spray angle is less than 30 and therefore, should not be used in high risk fire fighting situations such as internal attack. NOTE 2 These branchpipes should not be used when
21、 fighting fires in or near electrical installations when the spray angle is less than 30 without written authorisation from the manufacturer in the manual. This authorisation from the manufacturer should include safety distances. 2 Normative references The following referenced documents are indispen
22、sable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15182-1:2007, Hand-held branchpipes for fire service use Part 1: Common requirements 3 Terms
23、and definitions For the purposes of this document, the terms and definitions given in EN 15182-1:2007 and the following apply. 3.1 smooth bore branchpipe branchpipe providing a solid water stream 4 Requirements 4.1 General The branchpipes covered by this standard shall comply with EN 15182-1. 4.2 Me
24、chanical characteristics 4.2.1 Dimensions and mass Branchpipes (without inlet coupling) shall not exceed the dimensions and masses specified in Table 1. Licensed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:43:49 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15182-
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 15182 2007
链接地址:https://www.31doc.com/p-3738721.html