《BS-EN-10217-3-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-10217-3-2002.pdf(48页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10217-3:2002 Incorporating Amendment No. 1 Welded steel tubes for pressure purposes Technical delivery conditions Part 3: Alloy fine grain steel tubes The European Standard EN 10217-3:2002, with the incorporation of amendment A1:2005, has the status of a British Standard ICS 2
2、3.040.10; 77.140.75 ? BS EN 10217-3:2002 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 26 June 2002 BSI 6 March 2006 ISBN 0 580 39843 9 National foreword This British Standard is the official English language version of EN 10217-3:2002, inc
3、luding amendment A1:2005. Together with BS EN 10217-5:2002 it supersedes BS 3602-2:1991 which is withdrawn. The start and finish of text introduced or altered by CEN amendment is indicated in the text by tags ?. Tags indicating changes to CEN text carry the number of the CEN amendemnt. For example,
4、text altered by CEN amendment A1 is indicated by ?. The UK participation in its preparation was entrusted by Technical Committee ISE/73, Steels for pressure purposes, to Subcommittee ISE/73/1, Steel tubes for pressure purposes, which has the responsibility to: A list of organizations represented on
5、this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by
6、 using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immuni
7、ty from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in th
8、e UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 45 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 15471March
9、2006See national foreword EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10217-3 May 2002 ICS 23.040.10; 77.140.75 English version Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes Tubes souds en acier pour service sous pression - C
10、onditions techniques de livraison - Partie 3: Tubes en aciers alli grain fin Geschweite Stahlrohre fr Druckbeanspruchungen - Technische Lieferbedingungen - Teil 3: Rohre aus legierten Feinkornbausthlen This European Standard was approved by CEN on 25 April 2002; amendment A1 was approved by CEN on 9
11、 December 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may
12、be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Managem
13、ent Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
14、 Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any means re
15、served worldwide for CEN national Members. Ref. No. EN 10217-3:2002 + A1:2005 E +A1 January 2005 (includes amendment A1:2005) (inclut lamendement A1:2005)(enthlt nderung A1:2005) Contents Foreword .3 1Scope4 2Normative References.4 3Terms and definitions .6 4Symbols6 5Classification and designation.
16、6 5.1Classification .6 5.2Designation 7 6Information to be supplied by the purchaser .7 6.1Mandatory information7 6.2Options .7 6.3Example of an order8 7MANUFACTURING PROCESS8 7.1Steelmaking process.8 7.2Deoxidation process .8 7.3Tube manufacture and delivery conditions8 8Requirements.10 8.1General1
17、0 8.2Chemical composition 11 8.3Mechanical properties.11 8.4Appearance and internal soundness.15 8.5Straightness.16 8.6Preparation of ends.16 8.7Dimensions, masses and tolerances.17 9Inspection.23 9.1Type of inspection.23 9.2Inspection documents.23 9.3Summary of inspection and testing.24 10Sampling.
18、26 10.1Frequency of tests.26 10.2Preparation of samples and test pieces26 11Test methods .28 11.1Chemical analysis28 11.2Tensile test.28 11.3Flattening test29 11.4Ring tensile test.29 11.5Drift expanding test.30 11.6Ring expanding test 30 11.7Weld bend test for SAW tubes .30 11.8Impact test30 11.9Le
19、ak tightness test31 11.10Dimensional inspection 32 11.11Visual examination32 11.12Non-Destructive Testing32 11.13Material identification33 11.14Retests, sorting and reprocessing 33 12Marking.33 12.1Marking to be applied33 13Protection.34 Annex A (normative).35 Annex B (Normative)43 Annex ZA (informa
20、tive)44 Bibliography45 12.2Additional marking34 EN 10217-3:2002 (E) 2 Foreword This document (EN 10217-3:2002) has been prepared by Technical Committee ECISS/TC 29, “Steel tubes and fittings for steel tubes“, the secretariat of which is held by UNI. This European Standard shall be given the status o
21、f a national standard, either by publication of an identical text or by endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latest by November 2002. This document has been prepared under a mandate given to CEN by the European Commission and the E
22、uropean Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document. Other parts of EN 10217 are: Part 1: Non-alloy steel tubes with specified room temperature properties.
23、Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties. Part 4: Electric welded non-alloy steel tubes with specified low temperature properties. Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
24、. Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties. Part 7: Stainless steel tubes. Another European Standard series covering tubes for pressure purposes is: EN 10216: Seamless steel tubes for pressure purposes. According to the CEN/CENELEC Internal Regulat
25、ions, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and
26、the United Kingdom. Foreword to amendment A1 This document (EN 10217-3:2002/A1:2005) has been prepared by Technical Committee ECISS/TC 29 “Steel tubes and fittings for steel tubes”, the secretariat of which is held by UNI. This Amendment to European Standard EN 10217-3:2002 shall be given the status
27、 of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2005, and conflicting national standards shall be withdrawn at the latest by July 2005. This document has been prepared under a mandate given to CEN by the European Commission and the Europea
28、n Free Trade Association, and supports essential requirements of EU Directive 97/23/EC. For relationship with EU Directive 97/23/EC, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the fo
29、llowing countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Swe
30、den, Switzerland and United Kingdom. EN 10217-3:2002 (E) 3 1 Scope This Part of EN 10217 specifies the technical delivery condition in two test categories for welded tubes of circular cross section, made of weldable alloy fine grain steel. 2 Normative References This European Standard incorporates b
31、y date or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For date references, subsequent amendments to or revisions of, any of these publications apply to this European Stand
32、ard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). The requirements of this European Standard rule when they differ from those in the standards and documents referred to below: EN 760, We
33、lding consumables - Fluxes for submerged arc welding Classification EN 895, Destructive tests on welds in metallic materials - Transverse tensile test. EN 910, Destructive tests on weld in metallic materials -Bend test. EN 1321, Destructive tests on welds in metallic materials - Macroscopic and micr
34、oscopic examination of welds EN 10002-1, Metallic materials - Tensile testing - Part 1 : Method of test at ambient temperature. EN 10002-5, Metallic materials - Tensile testing - Part 5 : Method of testing at elevated temperature. EN 10020, Definitions and classification of grades of steel. EN 10021
35、, General technical delivery requirements for steel and iron products. EN 10027-1, Designation systems for steels - Part 1 : Steel names, principle symbols. EN 10027-2, Designation systems for steels Part 2 : Numerical systems. EN 10045-1, Metallic materials - Charpy impact test - Part 1 : Test meth
36、od. EN 10052, Vocabulary of heat treatment terms for ferrous products. EN 10204, Metallic products - Types of inspection documents. ENV 10220, Seamless and welded steel tubes - Dimensions and masses per unit length. EN 10233, Metallic materials - Tubes - Flattening test. EN 10234, Metallic materials
37、 - Tubes - Drift expanding test. EN 10236, Metallic materials - Tubes - Ring expanding test. EN 10237, Metallic materials - Tubes - Ring tensile test. EN 10246-1, Non-Destructive Testing of steel tubes Part 1 : Automatic electromagnetic testing of seamless and welded (except submerged arc welded) fe
38、rromagnetic steel tubes for verification of hydraulic leak- tightness. EN 10246-3, Non-Destructive Testing of steel tubes - Part 3 :Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections. EN 10217-3:2002 (E) 4 EN 10246-5, No
39、n-Destructive Testing of steel tubes Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections. EN 10246-6, Non-Destructive Testing of steel tubes - Part 6
40、: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections EN 10246-7, Non-Destructive Testing of steel tubes - Part 7 : Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the det
41、ection of longitudinal imperfections. EN 10246-8, Non-Destructive Testing of steel tubes Part 8: Automatic ultrasonic testing of the weld seam of electric welded tubes for the detection of longitudinal imperfections. EN 10246-9, Non-Destructive Testing of steel tubes Part 9: Automatic ultrasonic tes
42、ting of the weld seam of submerged arc-welded steel tubes for the detection of longitudinal and/or transverse imperfections. EN 10246-10, Non-Destructive Testing of steel tubes Part.10: Radiographic testing of the weld seam of automatic fusion arc-welded steel tubes for the detection of imperfection
43、s. EN 10246-14, Non-Destructive Testing of steel tubes - Part 14:Automatic ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of laminar imperfections. EN 10246-15, Non-Destructive Testing of steel tubes - Part 15: Automatic ultrasonic testing of st
44、rip/ plate used in the manufacture of welded steel tubes for the detection of laminar imperfections. EN 10246-16, Non-Destructive Testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections. EN
45、10246-17, Non-Destructive Testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections. EN 10256, Non-Destructive Testing of steel tubes - Qualification and competence of level 1 and level 2 NDT personnel. prEN 10266
46、1), Steel tubes, fittings and structural hollow sections - Symbols and definition of terms for use in product standards EN ISO 377, Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997) prEN 10168 1), Iron and steel products - Inspection
47、 documents - List of information and description EN ISO 2566-1, Steel - Conversion of elongation values Part 1: Carbon and low-alloy steels (ISO 2566- 1:1984) ISO 14284, Steel and iron - Sampling and preparation of samples for the determination of chemical composition EURONORM 1032) , Microscopic de
48、termination of ferritic grain size of steel. CR 10260, Designation systems for steel - Additional symbols CR 10261, ECISS Information Circular IC 11 - Iron and steel - Review of available methods of chemical analysis. 1)In preparation; until this document is published as a European standard, a corre
49、sponding national standard should be agreed at the time of enquiry and order. 2)Until this EURONORM is transformed into an a European Standard, it can be implemented or the corresponding national standard should be agreed at the time of enquiry and order. EN 10217-3:2002 (E) 5 3 Terms and definitions For the purposes of this Part of EN 10217 the terms and definitions given in EN 10020, EN 10021, EN 10052, prEN 10266 and the following apply: 3.1 test category classification tha
链接地址:https://www.31doc.com/p-3738743.html