BS-EN-10164-2004.pdf
《BS-EN-10164-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-10164-2004.pdf(18页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product Technical delivery conditions The European Standard EN 10164:2004 has the status of a British Standard ICS 77.140.70 ? BS EN 10164:2004 This British Standard was publishe
2、d under the authority of the Standards Policy and Strategy Committee on 16 December 2004 BSI 16 December 2004 ISBN 0 580 45118 6 National foreword This British Standard is the official English language version of EN 10164:2004. It supersedes BS EN 10164:1993 which is withdrawn. The UK participation
3、in its preparation was entrusted to Technical Committee ISE/12, Structural steels, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publ
4、ications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the ne
5、cessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the in
6、terpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 14, an inside back cover and
7、a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10164 December 2004 ICS 77.140.70 Supersedes EN 10164:1993 English version Ste
8、el products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions Aciers de construction caractristiques de dformation amliores dans le sens perpendiculaire la surface du produit - Conditions techniques de livraison Stahlerzeugnisse mit verb
9、esserten Verfomungseigenschaften senkrecht zur Erzeugnisoberflche - Technische Lieferbedingungen This European Standard was approved by CEN on 4 November 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard t
10、he status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, Germa
11、n). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denm
12、ark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EURO
13、PISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10164:2004: E EN 10164:2004 (E) 2 Contents Page Foreword3 Introduction.4 1 Scope 5 2 Normative r
14、eferences5 3 Designation 5 4 Information to be supplied by the purchaser .6 4.1 Mandatory information6 4.2 Options .6 5 Requirements.6 5.1 Reduction of area.6 5.2 Ultrasonic testing.7 6 Inspection.7 6.1 Test units7 6.1.1 General7 6.1.2 Flat products7 6.1.3 Sections8 7 Preparation of samples and test
15、 pieces8 7.1 Location and orientation of samples and test pieces8 7.1.1 Preparation of samples.8 7.1.2 Preparation of test pieces.9 7.2 Identification of samples and test pieces .12 8 Test method12 8.1 Tensile test.12 8.2 Retest13 8.3 Invalidation of tests.13 9 Marking, labelling and packaging13 10
16、Complaints .13 11 Options (see 4.2)13 Bibliography14 EN 10164:2004 (E) 3 Foreword This document (EN 10164:2004) has been prepared by Technical Committee ECISS/TC 10 “Structural steels Grades and qualities”, the secretariat of which is held by NEN. This European Standard shall be given the status of
17、a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards shall be withdrawn at the latest by June 2005. This document supersedes EN 10164:1993, Steel products with improved deformation properties perpendicular t
18、o the surface of the product - Technical delivery conditions. During the 5 year review of EN 10164:1993 the members of ECISS/TC 10 agreed to revise EN 10164:1993. It was asked to actualise the normative references and to bring the text in line with “Iron and steel standardization Model for a product
19、 standard”. In the scope the product thickness is increased to 400 mm to be in line with EN 10025-2. The upper yield strength is increased to 960 MPa to be in line with EN 10025-6. This document includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organi
20、zations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slo
21、venia, Spain, Sweden, Switzerland and United Kingdom. EN 10164:2004 (E) 4 Introduction Flat products and sections of steel as normally manufactured have deformation properties perpendicular to the surface (through thickness) which are different from those obtained in the surface direction. This anis
22、otropy of the properties may lead to difficulties in welded structures, for instance lamellar tearing. It is, however, possible to improve the through thickness properties by using additional steel making procedures. Through thickness properties are characterized in this document by specified values
23、 for reduction of area in a through thickness tensile test. There is no direct relationship between these values and the integrity of structures, because the risk of lamellar tearing is also basically influenced by the type of structure, weld design and welding procedure. The minimum values for redu
24、ction of area in this document cannot therefore by themselves be regarded as ensuring safety against occurrence of lamellar tearing. However the reduction of area is a good general guide to lamellar tear resistance i.e. the risk of lamellar tearing decreases with increased reduction of area in the t
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10164 2004
链接地址:https://www.31doc.com/p-3738991.html