BS-EN-13035-9-2006.pdf
《BS-EN-13035-9-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13035-9-2006.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13035-9:2006 Machines and plants for the manufacture, treatment and processing of flat glass Safety requirements Part 9: Washing installations ICS 81.100 ? BS EN 13035-9:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee
2、 on 31 March 2008 BSI 2008 ISBN 978 0 580 56650 9 National foreword This British Standard is the UK implementation of EN 13035-9:2006. The UK participation in its preparation was entrusted by Technical Committee MCE/3, Safeguarding of machinery, to Subcommittee MCE/3/13, Glass manufacturing machines
3、 Safety. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer imm
4、unity from legal obligations. Amendments/corrigenda issued since publication DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13035-9 July 2006 ICS 81.100 English Version Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9:
5、Washing installations Machines et installations pour la production, le faonnage et la transformation du verre plat - Exigences de scurit - Partie 9 : Machines laver le verre Maschinen und Anlagen zur Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 9: Waschmaschinen
6、This European Standard was approved by CEN on 24 May 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referen
7、ces concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into
8、 its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
9、Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAl
10、l rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13035-9:2006: E EN 13035-9:2006 (E) 2 Contents Page Foreword3 Introduction.4 1 Scope5 2 Normative references5 3 Terms and definitions .6 4 List of significant hazards 7 5 Safety requirement
11、s and/or protective measures8 6 Verification of safety requirements and/or protective measures 10 7 Information for use. 11 Annex A (informative) Typical constructions 13 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC. 16 Bi
12、bliography. 17 Figures Figure A.1 Scrubbing unit 13 Figure A.2 Double face scrubbing unit. 14 Figure A.3 Washing unit. 14 Figure A.4 Double washing unit 15 Figure A.5 Drying unit. 15 Tables Table 1 List of significant hazards 8 Table 2 Verification of safety requirements and/or protective measures.
13、11 BS EN 13035-9:2006 EN 13035-9:2006 (E) 3 Foreword This document (EN 13035-9:2006) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a nati
14、onal standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. This document has been prepared under a mandate given to CEN by the European Commission and the European Fr
15、ee Trade Association and supports essential requirements of EU Directive(s). For relationship with EU Directives, see informative Annex ZA, which is an integral part of this document. It is one of a series concerning machinery for the treatment and processing of flat glass (see Bibliography). Accord
16、ing to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den- mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithua
17、nia, Luxem- bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer- land and United Kingdom. BS EN 13035-9:2006 EN 13035-9:2006 (E) 4 Introduction This European Standard is a type C standard as stated in EN ISO 12100-1. The machinery concerned and th
18、e extent to which hazards, hazardous situations and events are covered are indicated in the scope of this European Standard. When provisions of this type C standard are different from those stated in type A or B standards, the provi- sions of this type C standard take precedence over the provisions
19、of the other standards, for machines that have been designed and built according to the provisions of this type C standard. BS EN 13035-9:2006 EN 13035-9:2006 (E) 5 1 Scope 1.1 This European Standard contains the safety requirements for the design and installation of stationary glass washing install
20、ations as shown as typical in Annex A. Glass washing installations are designed to perform the following functions: feeding of flat glass to the clean- ing and drying unit and transport (delivery) to the estimation equipment and to the take-off position of the flat glass sheet. None of the processin
21、g phases requires direct manual intervention. 1.2 This European Standard deals with the significant hazards, hazardous situations and events with the exception of those by interfaces with other machines used in a process line relevant to glass washing installa- tions, when they are used as intended
22、and under the conditions foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards during commissioning, the operation and maintenance. 1.3 This European Standard is
23、not applicable to machines for loading and unloading of glass (see EN 13035-5) and to conveyors (see EN 619) and fans. If there are specific risks that arise by their use as an inte- gral part of flat glass washing installations, appropriate measures are specified. 1.4 This European Standard is not
24、applicable to glass washing installations for automotive and bent glass. 1.5 This European Standard is not applicable to water preparation and disposal of waste washing liquid. 1.6 This European Standard is not applicable to machinery manufactured before the date of publication of this European Stan
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13035 2006
链接地址:https://www.31doc.com/p-3739032.html