《BS-EN-1307-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-1307-1997.pdf(22页珍藏版)》请在三一文库上搜索。
1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 1307 : 1997 The Eur
2、opean Standard EN 1307 : 1997 has the status of a British Standard ICS 59.080.60 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Textile floor coverings Classification of pile carpets Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:30:32 GMT+00:00 2006, Uncontrolled
3、Copy, (c) BSI BS EN 1307 : 1997 This British Standard, having been prepared under the direction of the Sector Board for Materials and Chemicals, was published under the authority of the Standards Board and comes into effect on 15 July 1997 BSI 1997 The following BSI references relate to the work on
4、this standard: Committee reference TCI/3 Draft for comment 94/302862 DC ISBN 0 580 27655 4 Amendments issued since publication Amd. No.DateText affected Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee TCI/3, Textile floor
5、ing coverings, upon which the following bodies were represented: British Apparel and Textile Confederation British Carpet Manufacturers Association Ltd. British Polyolefin Textiles Association British Shops and Stores Association (BSSA) British Textile Technology Group Confederation of British Wool
6、Textiles Limited Consumer Policy Committee of BSI Contract Flooring Association Entrance Flooring Systems Association Fibre Bonded Carpet Manufacturers Association Health Care Supplies South West Institute of Trading Standards Administration International Wool Secretariat Sgs United Kingdom Ltd. Woo
7、ls of New Zealand Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:30:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 1307 : 1997 BSI 1997i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 13073 National annex NA (informative) Limitations o
8、f EN 130713 Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:30:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii BSI 1997 BS EN 1307 : 1997 National foreword This British Standard has been prepared by Technical Committee TCI/3 and is the English language version of EN 1307 : 1997 Textile fl
9、oor coverings Classification of pile carpets, published by the European Committee for Standardization (CEN). It supersedes BS 7131 : Part 1 : 1989, which is withdrawn. EN 1307 is the result of extensive consultation between the carpet testing institutes of Europe. When the standard was at the prEN f
10、ormal vote stage, the UK voted against it because it considers that, although it represents the state of the art of carpet testing and specification, the text submitted did not explain the limitations of the standard and without this explanation it could on occasions mislead the user and wrongly cla
11、ssify some carpets. Annex NA provides the necessary information on the limitations of the standard in order that any organization using the standard as the basis of a contract specification or a carpet labelling scheme can build in safeguards to overcome its limitations. The committee would welcome
12、comments arising from any aspects of the application of this standard, for consideration at the first review of the standard. Cross-references Publication referred toCorresponding British Standard EN 434BS EN 434 : 1994 Resilient floor coverings Determination of dimensional stability and curling aft
13、er exposure to heat EN 984BS EN 984 : 1995 Determination of the mass per unit area of the use surface of needled floor coverings EN 985BS EN 985 : 1995 Textile floor coverings Castor chair test EN 986BS EN 986 : 1995 Textile floor coverings Tiles termination of dimensional changes due to the effect
14、of varied water and heat conditions and distortion out of plane EN 994BS EN 994 : 1996 Textile floor coverings Determination of the side length, squareness and straightness of tiles EN 995BS EN 995 : 1996 Textile floor coverings Assessment of the creep of the backings EN 1318BS EN 1318 : 1997 Textil
15、e floor coverings Determination of the apparent effective thickness of backing EN 1471BS EN 1471 : 1997 Textile floor coverings Assessment of changes in appearance BS EN ISO 105 Textiles Tests for colour fastness EN ISO 105-A01 : 1995BS EN ISO 105-A01 : 1996 General principles of testing (ISO 105-A0
16、1 : 1995) EN ISO 105-E01 : 1996BS EN ISO 105-E01 : 1996 Colour fastness to water (ISO 105-E01 : 1996) EN ISO 105-X12 : 1995BS EN ISO 105-X12 : 1995 Colour fastness to rubbing (ISO 105-X12 : 1993) BS 2750 Measurement of sound insulation in buildings and of building elements ISO 140-8 : 1978BS 2750 :
17、Part 8 : 1980 Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a standard floor ISO 354 : 1985BS EN 20354 : 1993 Acoustics Measurement of sound absorption in a reverberation room BS 5821 Methods for rating the sound insulation in buildings and of building el
18、ements ISO 717-2 : 1982BS 5821 : Part 2 : 1984 Method for rating the impact sound insulation Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:30:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BSI 1997iii BS EN 1307 : 1997 Publication referred toCorresponding British Standard ISO 845 : 1988BS
19、 EN ISO 845 : 1995 Cellular plastics and rubbers Determination of apparent (bulk) density ISO 1765BS 4051 : 1987 Method for determination of thickness of textile floor coverings ISO 2424BS 5557 : 1992 Textile floor coverings Vocabulary Summary of pages This document comprises a front cover, an insid
20、e front cover, pages i to iv, the EN title page, pages 2 to 14, an inside back cover and a back cover Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:30:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ivblank Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:30:32 GMT+00:00 2006, Unc
21、ontrolled Copy, (c) BSI CEN European Committee for Standardization Comite Europe en de Normalisation Europa isches Komitee fu r Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 reserved to CEN members. Ref. No. EN 1307 : 1997 E EUROPEAN STANDARDEN 1307 NORME EUROPE ENNE EUROPA I
22、SCHE NORM January 1997 ICS 59.080.60 Descriptors: Textiles, floor coverings, textile floor coverings, carpets, floor slabs, classifications, appearance, wear resistance, designation, acoustic insulation, characteristics, specifications English version Textile floor coverings Classification of pile c
23、arpets Reve tements de sol textiles Classement dusage des moquettes Textile Bodenbela ge Einstufung von Polteppichen This European Standard was approved by CEN on 1996-11-25. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Euro
24、pean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English
25、, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finl
26、and, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:30:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 2 EN 1307 : 1997 BSI 1997 Foreword This Eur
27、opean Standard has been prepared by Technical Committee CEN/TC 134, Resilient and textile floor coverings, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by
28、July 1997, and conflicting national standards shall be withdrawn at the latest by July 1997. Annex A is normative and annex B is normative According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard:
29、 Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword 1Scope3 2Normative references3 3Definitions4 4Description of categories and levels of use4 5Iden
30、tification requirements4 6Basic requirements4 7Level of use classification4 8Luxury rating requirements8 9Additional characteristics10 Annexes A(normative) Additional requirements for pile carpet tiles11 B(normative) Calculation of wear index and luxury rating12 Licensed Copy: sheffieldun sheffieldu
31、n, na, Sun Oct 29 12:30:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 3 EN 1307 : 1997 BSI 1997 1 Scope This European Standard describes and specifies wall-to-wall pile carpets and pile carpet tiles, including classification into use classes in respect of wear and appearance retention and a cla
32、ssification for luxury rating. This standard applies to all machine-made pile carpets in accordance with ISO 2424 (knitted, tufted, woven and flocked). It does not apply to needled pile carpets. This standard is also applicable to tiles, the additional requirements for which are given in annex A. Th
33、is standard is not applicable to rugs. 2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated refere
34、nces, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. EN 434Resilient floor coverings Determination of dimensio
35、nal stability and curling after exposure to heat EN 984Determination of the mass per unit area of the use surface of needled floor coverings EN 985Textile floor coverings Castor chair test EN 986Textile floor coverings Tiles Determination of dimensional changes due to the effects of varied water and
36、 heat conditions, and distortion out of plane EN 994Textile floor coverings Determination of the side length, squareness and straightness of tiles EN 995Textile floor coverings Assessment of the creep of the backings EN 1318Textile floor coverings Determination of the apparent effective thickness of
37、 backing EN 1471Textile floor coverings Assessment of changes in appearance prEN 1813Textile floor coverings Determination of wool fibre integrity using an abrasion machine prEN 1814Textile floor coverings Determination of resistance to fraying of edges using the modified Vettermann drum test prEN 1
38、815Resilient and textile floor coverings Assessment of static electrical propensity prEN 1963Textile floor coverings Tests using the Lisson Tretrad machine EN ISO 105-A01 : 1995 Textiles Tests for colour fastness Part A01 : General principles of testing (ISO 105-A01:1994) ISO 105-B02 : 1994 Textiles
39、 Tests for colour fastness Part B02 : Colour fastness to artificial light : Xenon arc fading lamp test EN ISO 105-E01 : 1996 Textiles Test for colour fastness Part E01 : Colour fastness to water (ISO 105- E01:1994) EN ISO 105-X12 : 1995 Textiles Test for colour fastness Part X12 : Colour fastness to
40、 rubbing (ISO 105-X12:1993) ISO 140-8 : 1978Acoustics Measurement of sound insulation in buildings and of buildings elements Part 8 : Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a standard floor ISO 354 : 1985Acoustics Measurement of sound absorption in
41、 a reverberation room ISO 717-2 : 1982Acoustics Rating of sound insulation in buildings and of building elements Part 2 : Impact sound insulation ISO 845 : 1988Cellular plastics and rubbers Determination of apparent (bulk) density ISO 1763Carpets Determination of number of tufts and/or loops per uni
42、t length and per unit area ISO 1765Machine-made textile floor coverings Determination of thickness ISO 1766Textile floor coverings Determination of thickness of pile above the substrate ISO 2424Textile floor coverings Vocabulary Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:30:32 GMT+00:
43、00 2006, Uncontrolled Copy, (c) BSI Page 4 EN 1307 : 1997 BSI 1997 ISO 2551Machine-made textile floor coverings Determination of dimensional changes due to the effects of varied water and heat conditions ISO 3018Textile floor coverings Rectangular textile floor coverings - Determination of dimension
44、s ISO 8543Textile floor coverings Methods for determination of mass ISO 8302 : 1991 Thermal insulation Determination of steady-state thermal resistance and related properties Guarded hot plate apparatus ISO/TR 10361Textile floor coverings Production of changes in appearance by means of a Vettermann
45、drum and hexapod tumbler testers ISO/DIS 10965Textile floor coverings Determination of electrical resistance 3 Definitions For the purposes of this standard the definitions given in ISO 2424 apply. 4 Description of categories and levels of use 4.1 Carpet categories Carpets shall be categorized L, M
46、or N in accordance with table 1. NOTE. Category L is therefore applicable to thick, heavy carpets, category M is an intermediate category and category N describes all other carpets 4.2 Levels of use Textile floor coverings are classified as suitable for different levels of use in accordance with the
47、 performance requirements specified in clause 7. The different levels of use are described in table 2. NOTE. In very demanding commercial environments, class 4 should be used as the basis to which additional requirements are added to provide an individual full specification. 5 Identification require
48、ments This clause specifies the characteristics for identification of the product and requirements for tolerances for the identifying properties. The manufacturer shall provide the following information in accordance with the definitions in ISO 2424: commercial references; type of manufacture and ga
49、uge (tufted, woven etc.); type of pile (loop, woven, etc.); type of backing; and shall declare the values of the characteristics in table 3. 6 Basic requirements Pile carpets shall conform to the basic requirements specified in table 4. 7 Level of use classification Pile carpets are classified as to their suitability for use according to different circumstances. The two classification properties, wear and change in appearance, are intended to indicate
链接地址:https://www.31doc.com/p-3739055.html