《BS-EN-130301-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-130301-2002.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 130301:2002 Harmonized system of quality assessment for electronic components Blank Detail Specification: Aluminium electrolytic capacitors with non-solid electrolyte The European Standard EN 130301:2002 has the status of a British Standard ICS 31.060.50 NO COPYING WITHOUT BSI
2、 PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:24:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 130301:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee,
3、was published under the authority of the Standards Policy and Strategy Committee on 28 March 2002 BSI 28 March 2002 ISBN 0 580 39261 9 National foreword This British Standard is the official English language version of EN 130301:2002 published by the European Committee for Electrotechnical Standardi
4、zation (CENELEC). It supersedes BS CECC 30 301:1993 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee EPL/40, Capacitors and resistors for electrical equipment, to Subcommittee EPL/40/1, Capacitors and electromagnetic interference suppression components
5、 for electrical equipment, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in
6、 the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are
7、 responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK
8、interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 17, and a back cover. The BSI copyright date displayed in this document indicates wh
9、en the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:24:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARDEN 130301 NORME EUROPENNE EUROPISCHE NORMJanuary 2002 CENELEC European Committee for
10、Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. R
11、ef. No. EN 130301:2002 E ICS 31.060.50Supersedes CECC 30 301:1988 English version Blank Detail Specification: Aluminium electrolytic capacitors with non-solid electrolyte Spcification particulire cadre: Condensateurs lectrolytiques laluminium lectrolyte non solide Vordruck fr Bauartspezifikation: Al
12、uminium-Elektrolyt-Kondensatoren mit flssigem Elektrolyten This European Standard was approved by CENELEC on 1996-07-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard wi
13、thout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other lang
14、uage made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France
15、, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:24:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 130301:2002- 2 - Foreword The text of CECC 30 301
16、:1988, Issue 2, with its amendments A1 and A2 and documents CECC(Secretariat)2456, 2640, 2641, 3063 and 3064, was submitted to the formal vote for conversion into a European Standard. The text of the draft, together with the voting report, circulated as document CECC(Secretariat)3206, was approved a
17、s EN 130301 on 1992-10-14. A draft amendment was submitted to the Unique Acceptance Procedure and was approved by CENELEC on 1996-07-02. During its meeting in March 2000 in Brussels, the Technical Committee CENELEC TC 40XA, Capacitors, confirmed the need to publish the combined text of the above dra
18、fts as EN 130301. This European Standard supersedes CECC 30 301:1988 and its amendments. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop)2002-08-01 latest date by which the nati
19、onal standards conflicting with the EN have to be withdrawn(dow)2002-08-01 _ Page 2 EN 130301:2002 Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:24:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI - 3 -EN 130301:2002 Identification of the detail specification and the component The first pag
20、e of the detail specification should have the layout recommended on page 4 of this blank detail specification. The numbers in square brackets correspond to the following information which shall be inserted at the position indicated: 1the name of the National Standards Organization under whose author
21、ity the detail specification is published and, if applicable, the organization from whom the detail specification is available; 2the CECC symbol and number allotted to the detail specification by the CENELEC Central Secretariat; 3the number and issue number of the CECC generic and sectional specific
22、ation as relevant; also national reference if different; 4if different from the CECC number, the national number of the detail specification, date of issue and any further information required by the national system, together with any amendment numbers; 5a brief description of the component or range
23、 of components; 6information on typical construction when applicable; For 5 and 6, the text to be given in the detail specification should be suitable for an entry in CECC 00 200 (Register of Approvals) and CECC 00 300 (Register of National Documents). 7an outline drawing with main dimensions which
24、are of importance for interchangeability and/or reference to the appropriate national or international document for outlines. Alternatively, the drawing may be given in an annex to the detail specification but 7 should always contain an illustration of the general outer appearance of the component;
25、8the level(s) of quality assessment covered by the detail specification; 9reference data giving information on the most important properties of the component which allow comparison between the various component types intended for the same, or for similar, applications. Page 3 EN 130301:2002 Licensed
26、 Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:24:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 130301:2002- 4 - 12 CECC 30 301-. . . 3 ELECTRONIC COMPONENTS OF ASSESSED QUALITY DETAIL SPECIFICATION IN ACCORDANCE WITH: EN 130000:1993 EN 130300:1997 4 7 Outline drawing (1st angle projection) 5
27、DETAIL SPECIFICATION FOR ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE 6 TYPICAL CONSTRUCTION (Examples): cylindrical / rectangular metallic / non metallic case insulated / non insulated axial / radial terminations (Other shapes are permitted within the dimensions given, see Table 1)
28、8 ASSESSMENT LEVEL E 9 Reference data: Rated capacitance range, capacitance tolerance, d.c. rated voltage range, climatic category, performance grade. Information about manufacturers who have components qualified to this detail specification is available in the current CECC 00 200: Register of Firms
29、, Products and Services Approved under the CECC System (Register of Approvals). Page 4 EN 130301:2002 Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:24:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI - 5 -EN 130301:2002 1General data 1.1Method of mounting for vibration and bump or shock tes
30、ts See 1.3.2 of EN 130300. 1.2Dimensions Table 1 Case sizeDimensions mm referenceDLHd. NOTE 1 When there is no case size reference, Table 1 may be omitted and the dimensions shall be given in Table 2A, which then becomes Table 1. NOTE 2 The dimensions shall be given as maximum dimensions or as nomin
31、al dimensions with a tolerance. 1.3Ratings and characteristics Capacitance range CR(see Table 2A) Tolerance on rated capacitance Rated voltage UR (see Table 2A) Category voltage UC (if applicable)(see Table 2A) Climatic category Rated temperature Rated ripple current(see Table 2B) Tangent of loss an
32、gle (tan ?)(see Table 2B) Leakage current Impedance (if required)(see Table 2B) Reverse voltage (if required) Insulation resistance (if applicable) NOTE Instead of the tangent of loss angle (tan ?), the equivalent series resistance ESR may be specified in accordance with 4.3.3.2 d) of EN 130300. Tab
33、le 2A Values of capacitance related to voltages and case sizes Rated voltage in V Category voltage in V 1) Rated capacitance in FCase sizeCase sizeCase sizeCase size 1) If different from the rated voltage. Page 5 EN 130301:2002 Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:24:33 GMT+00:0
34、0 2006, Uncontrolled Copy, (c) BSI EN 130301:2002- 6 - Table 2B Tangent of loss angle, impedance and rated ripple current UR (V) CR (F) Tangent of loss angle (tan ?) at . C and . Hz or ESR (?) Impedance (?) at . C and . Hz (if required) Rated ripple current (A) at . C and . Hz 1.4Related documents G
35、eneric specification:EN 130000 Sectional specification:EN 130300 1.5Marking The marking of the capacitor, if any, and the packing shall be in accordance with 1.5 of EN 130300. NOTE The details of the marking of the component and packing shall be given in full in the detail specification. 1.6Ordering
36、 information Orders for capacitors covered by this specification shall contain, in clear or coded form, the following minimum of information: 1) rated capacitance; 2) tolerance on rated capacitance; 3) rated voltage; 4) number and issue reference of the detail specification and style reference. 1.7C
37、ertified test records of released lots Required / not required. 1.8Additional information (not for inspection purposes) 1.8.1Useful life If useful life is to be indicated, the following definition of useful life applies: a)Load conditions Load conditions for definition of useful life are: -rated vol
38、tage, -rated ripple current (the peak voltage of the alternating voltage superimposed on the d.c. voltage must not exceed the value of the rated voltage), -rated temperature. Page 6 EN 130301:2002 Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:24:33 GMT+00:00 2006, Uncontrolled Copy, (c)
39、BSI - 7 -EN 130301:2002 b)Failure criteria Failures are specified as follows: -short or open circuit; -capacitance change exceeding 3 times the limit for endurance testing given in the sectional specification or 50 % (whichever is the smaller); -tan ? or ESR exceeding 3 times the initial limit; -HF
40、impedance exceeding 3 times the initial limit; -leakage current exceeding the initial limit; -unusable terminations; -several damaged insulation; -external shorting of the terminations by electrolyte; -operation of pressure relief device. (When the detail specification indicates that a repetitive pr
41、essure relief device is applied at the capacitor, the effects of the intended operation of the device - e.g. slight colouring or discolouring, slight wetting etc. - shall not be considered as failure. Seepage, however, is not permitted.) c)Failure percentage End of life is reached when the failure p
42、ercentage is exceeding 1 %. 1.9Additional or increased severities or requirements to those specified in the generic and/or sectional specification NOTE Additional or increased requirements should be specified only when essential. Table 3 Other characteristics This table is to be used for defining ch
43、aracteristics which are additional to or more severe than those given in the sectional specification. 2Inspection requirements 2.1Procedures 2.1.1 For Qualification Approval, the procedures shall be in accordance with 3.4 of EN 130300. 2.1.2 For Quality Conformance Inspection, the test schedule (Tab
44、le 4) includes sampling, periodicity, severities and requirements. The formation of inspection lots is covered by 3.5.1 of EN 130300. Page 7 EN 130301:2002 Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:24:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 130301:2002- 8 - Table 4A Test sch
45、edule for conformance (lot-by-lot) Inspection (Groups A and B) Assessment level E Clause numberConditions of test 1)ILAQL %Performance and test 1) 7) requirements 1) Group A1 4.2Visual examination 4.2Dimensions (Gauging) Non-destructiveS-42,5 As in 4.2 Marking legible and as specified in 1.5 of this
46、 specification As in Table 1 of this specification Group A2 4.3.1Leakage current 4.3.2Capacitance 4.3.3Tangent of loss angle or ESR 4.3.4Impedance 2) Non-destructive Protective resistor: . ? 3) Frequency: . Hz 3) Frequency: . Hz 3) Frequency: . Hz 3) II1,0 As in 4.3.1.2 Within specified tolerance 3)
47、 As in Table 2B of this specification As in Table 2B of this specification Group B1 4.6Solderability 4) 5) Destructive Ageing: . 3) (none or 4 h at 155 C dry heat or other) Method: . 3) S-32,5 As in 4.6.2 Group B2 4.22Solvent resistance of marking 2) 4.17Storage at high temperature 2) 4.17.1 Initial
48、 measurement 4.17.3 Final measurements Destructive Method 1 Rubbing material: cotton wool Recovery: . 3) Temperature: upper category temperature Duration: . h 3) Recovery: 16 h to 32 h Capacitance Visual examination Leakage current S-32,5 Marking legible No visible damage, no leakage of electrolyte
49、? 2 times the limit in 4.3.1.2 Page 8 EN 130301:2002 Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:24:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI - 9 -EN 130301:2002 Tabelle 4A (abgeschlossen) Clause numberConditions of test 1)ILAQL %Performance and test 1) 7) requirements 1) Capacitance Tangent of loss angle or ESR ?C/C? ? 10 % of value measured in 4.17.1 ? 1,2 times the limit in Table 2B of this specification Group B2 4.19Measurement at low temperature 6) Non-destructive The capacitors
链接地址:https://www.31doc.com/p-3739096.html