BS-EN-13632-2003 BS-2000-518-2003.pdf
《BS-EN-13632-2003 BS-2000-518-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13632-2003 BS-2000-518-2003.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13632:2003 BS 2000-518:2003 Methods of test for petroleum and its products BS 2000-518: Bitumen and bituminous binders Visualisation of polymer dispersion in polymer modified bitumen (Identical with IP 518-2004) The European Standard EN 13632:2003 has the status of a British S
2、tandard ICS 75.140 ? BS EN 13632:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 16 January 2004 BSI 16 January 2004 ISBN 0 580 43273 4 National foreword This British Standard is the official English language version of EN 13632:2003. Th
3、e UK participation in its preparation was entrusted to Technical Committee PTI/13, Petroleum testing and terminology, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Energy Institute, under the brand of Institute of
4、Petroleum publishes and sells all parts of BS 2000, and all BS EN petroleum test methods that would be part of BS 2000, both in its annual publication “Standard methods for analysis and testing of petroleum and related products and British Standard 2000 parts” and individually. Further information i
5、s available from: Energy Institute, 61 New Cavendish Street, London W1G 7AR. Tel: 020 7467 7100. Fax: 020 7255 1472. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled
6、 “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance wi
7、th a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related interna
8、tional and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 11 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendment
9、s issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13632 December 2003 ICS 75.140 English version Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen Bitumes et liants bitumineux - Visualisation de la dis
10、persion des polymres dans les bitumes modifis par des polymres Bitumen und bitumenhaltige Bindemittel - Visualisierung der Polymerverteilung in polymermodifiziertem Bitumen This European Standard was approved by CEN on 21 November 2003. CEN members are bound to comply with the CEN/CENELEC Internal R
11、egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This
12、European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the na
13、tional standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE
14、 NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13632:2003 E EN 13632:2003 (E) 2 Contentspage Foreword3 1Scope 4 2Normative re
15、ferences 4 3Principle4 4Apparatus .4 5Preparation of test samples5 6Procedure .5 7Expression of results 5 8Test report 5 Annex A (informative) Bitumen modified by polymers.7 A.1Introduction7 A.2Light source and filter system7 A.3Polymer bitumen pictures.8 EN 13632:2003 (E) 3 Foreword This document E
16、N 13632:2003 has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2004, and con
17、flicting national standards shall be withdrawn at the latest by June 2004. Annex A is informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Czech Republic, Denm
18、ark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. EN 13632:2003 (E) 4 1 Scope This European Standard specifies a method for visualisation of the polymer distribution
19、in a polymer modified bitumen by fluorescent microscopy. The method is applicable for most of the commercially used polymers, but before the method is used it should be examined whether the test is applicable for the actual polymer. The method should only be used for identification purposes, i.e. in
20、 connection with production control. NOTESample preparation and treatment have an important influence on the test results and it is essential to follow strictly the method described to achieve comparable results. WARNING The use of this European Standard may involve hazardous materials, operations a
21、nd equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to
22、use. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or
23、revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 58 1), Bitumen and bituminous binders Sampling bituminous binders.
24、 EN 12594, Bitumen and bituminous binders Preparation of test samples. 3 Principle A sample of polymer modified bitumen is homogenised by gentle stirring and poured into a preheated mould. After a controlled cooling procedure to ambient temperature the sample is cooled below 20 C for a minimum perio
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-13632-2003 BS-2000-518-2003 BS EN 13632 2003 2000 518
链接地址:https://www.31doc.com/p-3739127.html