BS-EN-15272-4-2007.pdf
《BS-EN-15272-4-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-15272-4-2007.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 15272-4:2007 Inland navigation vessels Equipment for rope leading Part 4: Rope lead The European Standard EN 15272-4:2007 has the status of a British Standard ICS 47.020.50; 47.060 ? Licensed Copy: London South Bank University, London South Bank University, Fri Nov 16 07:38:40
2、 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 15272-4:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2007 BSI 2007 ISBN 978 0 580 56352 2 National foreword This British Standard is the UK implementation of EN 15272-4:2007
3、. The UK participation in its preparation was entrusted by Technical Committee SME/32, Ships and marine technology Steering committee, to Panel SME/32/-/7, Ships and marine technology Inland navigation vessels. A list of organizations represented on this committee can be obtained on request to its s
4、ecretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed C
5、opy: London South Bank University, London South Bank University, Fri Nov 16 07:38:40 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15272-4 September 2007 ICS 47.020.50; 47.060 English Version Inland navigation vessels - Equipment for rope leading - P
6、art 4: Rope lead Bateaux de navigation intrieure - Equipement de guidage du cble - Partie 4: cubier Fahrzeuge der Binnenschifffahrt - Ausrstung zur Seilfhrung - Teil 4: Klse This European Standard was approved by CEN on 23 August 2007. CEN members are bound to comply with the CEN/CENELEC Internal Re
7、gulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. Th
8、is European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are
9、 the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer
10、land and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. E
11、N 15272-4:2007: E Licensed Copy: London South Bank University, London South Bank University, Fri Nov 16 07:38:40 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15272-4:2007 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .4 4 Types and dimensions5 5 Materials .
12、7 6 Design.8 7 Designation 8 8 Marking.8 9 Manufacturers certificate.8 Bibliography9 Figures Figure 1 Rope lead in bulwark, type A 5 Figure 2 Freestanding rope lead, type B 6 Figure 3 Rope lead with horns in bulwark, type AH 6 Figure 4 Freestanding rope lead with horns, type BH. 7 Tables Table 1 Dim
13、ensions. 7 Licensed Copy: London South Bank University, London South Bank University, Fri Nov 16 07:38:40 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15272-4:2007 (E) 3 Foreword This document (EN 15272-4:2007) has been prepared by Technical Committee CEN/TC 15 “Inland navigation vessels”, the secr
14、etariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2008, and conflicting national standards shall be withdrawn at the latest by March 2008. EN 15272 Inland navi
15、gation vessels Rope leading consists of: Part 1: General requirements Part 2: Fairlead Part 3: Roller fairlead Part 4: Rope lead According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria,
16、Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy:
17、 London South Bank University, London South Bank University, Fri Nov 16 07:38:40 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15272-4:2007 (E) 4 1 Scope This European Standard specifies requirements for rope leads on inland navigation vessels, e.g. from the deck to the quay. 2 Normative references
18、The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1563, Founding Spheroidal graphite cast irons
19、EN 10293, Steel castings for structural and general engineering EN 13573, Inland navigation vessels Anchoring, coupling, towing, hauling and mooring systems EN 15272-1:2007, Inland navigation vessels Equipment for rope leading Part 1: General requirements EN ISO 8062-3, Geometrical Product Specifica
20、tions (GPS) Dimensional and geometrical tolerances for moulded parts Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007) ISO 3755, Cast carbon steels for general engineering purposes 3 Terms and definitions For the purposes of this document,
21、 the terms and definitions given in EN 13573 and the following apply. 3.1 rope lead structure in the bulwark or freestanding on the deck of inland navigation vessels through which ropes are led and which is reinforced and lined so that minimum damage is caused to the rope 3.2 horns devices on a rope
22、 lead on which to deposit ropes Licensed Copy: London South Bank University, London South Bank University, Fri Nov 16 07:38:40 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15272-4:2007 (E) 5 4 Types and dimensions Type A see Figure 1, type B see Figure 2. If rope leads have additional devices, e.g.
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 15272 2007
链接地址:https://www.31doc.com/p-3739183.html