BS-EN-13336-2004.pdf
《BS-EN-13336-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13336-2004.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13336:2004 Leather Uphotsleyr Upholstery leather characteristics Guide for selection of leather for furniture The European Standard EN 13336:2004 has the status of a British Standard ICS 59.140.30; 97.140 ? BS EN 13336:2004 This British Standard was published under the authori
2、ty of the Standards Policy and Strategy Committee on 7 October 2004 BSI 7 October 2004 ISBN 0 580 44562 3 National foreword This British Standard is the official English language version of EN 13336:2004. The UK participation in its preparation was entrusted to Technical Committee TCI/69, Footwear a
3、nd leather, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue
4、 under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct
5、 application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests inform
6、ed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 11 and a back cover. The BSI copyright notice displayed in this document indicates when the document
7、 was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13336 September 2004 ICS 59.140.30; 97.140 English version Leather - Upholstery leather characteristics - Guide for selection of leather for furniture Cuir - Caractristiqu
8、es des cuirs pour garniture - Guide pour le choix de cuirs pour lameublement Leder - Richtwerte fr Mbelleder - Leitfaden zur Auswahl von Mbelleder This European Standard was approved by CEN on 1 July 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
9、conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in t
10、hree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of
11、Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STAND
12、ARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13336:2004: E EN 13336:2004 (E) 2 Contents page For
13、eword3 Introduction.4 1 Scope 5 2 Normative references5 3 Termsnandndefinitions .5 4 General principles6 5 Sampling.6 6 Conditioning and sampling preparation .6 7 Characteristics, test methods and recommended values.6 8 Test report6 Annex A (normative).7 A.1 Essential characteristics, recommended va
14、lues and test methods for upholstery leather for furniture 7 A.2 Subsidiary characteristics, recommended values and test methods for upholstery leather for furniture 10 EN 13336:2004 (E) 3 Foreword This document (EN 13336:2004) has been prepared by CEN /TC 289, “Leather“, the secretariat of which is
15、 held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by March 2005. According to the CEN/CENELEC Internal R
16、egulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands
17、, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 13336:2004 (E) 4 Introduction This document was prepared by CEN/TC 289 Leather in order to provide the leather and the furniture industries with guidelines on which both seller and buyer can base their
18、negotiations. EN 13336:2004 (E) 5 1 Scope This document gives guidelines for the test methods and recommended values for upholstery leather for furniture. This document also specifies the sampling and conditioning procedures of specimens. 2 Normative references The following referenced documents are
19、 indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1021-1, Furniture - Assessment of the ignitability of upholstered furniture - Part 1
20、: Ignition source: Smouldering cigarette (ISO 8191-1:1987 modified) EN 1021-2, Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source: Match flame equivalent (ISO 8191-2:1988 modified) EN ISO 105-B02, Textiles - Tests for colour fastness. Part B02: Colour fastn
21、ess to artificial light: Xenon arc fading lamp test (ISO 105-B02:1994) EN ISO 2418, Leather - Chemical, physical, mechanical and fastness tests Sampling location (ISO 2418:2002) EN ISO 2419, Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2002) EN ISO 3377-1,
22、Leather - Physical and mechanical tests - Determination of tear load Part 1: Single edge tear (ISO 3377-1:2002) EN ISO 4044, Leather - Preparation of chemical test samples (ISO 4044:1977) EN ISO 4045, Leather - Determination of pH (ISO 4045:1977) EN ISO 5402, Leather - Physical and mechanical tests
23、- Determination of flex resistance by flexometer method (ISO 5402:2002) EN ISO 11640, Leather - Tests for colour fastness colour fastness to cycles of to-and-fro rubbing (ISO 11640:1993) EN ISO 15700, Leather - Tests for colour fastness - Colour fastness to water spotting (ISO 15700:1998) EN ISO 172
24、33, Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2002) EN ISO 11641, Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:1993) EN ISO 11644, Leather - Tests for adhesion of finish (ISO 11644:1993) ISO 25
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13336 2004
链接地址:https://www.31doc.com/p-3739244.html