BS-EN-13775-5-2004.pdf
《BS-EN-13775-5-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13775-5-2004.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13775-5:2004 Railway applications Measuring of new and modified freight wagons Part 5: Bogies with 3 wheelsets The European Standard EN 13775-5:2004 has the status of a British Standard ICS 45.060.20 ? BS EN 13775-5:2004 This British Standard was published under the authority
2、of the Standards Policy and Strategy Committee on 29 July 2004 BSI 29 July 2004 ISBN 0 580 44174 1 National foreword This British Standard is the official English language version of EN 13775-5:2004. The UK participation in its preparation was entrusted by Technical Committee RAE/1, Railway applicat
3、ions, to Subcommittee RAE/1/-/9, Wagons (tank/freight), which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in
4、this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a
5、contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposa
6、ls for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 21 and a back cover. The BSI copyright notice display
7、ed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13775-5 June 2004 ICS 45.060.20 English version Railway applications - Measuring of new and modified freight wagons - Part 5
8、: Bogies with 3 wheelsets Applications ferroviaires - Mesure des wagons lors de leur construction et lors de modifications - Partie 5: Bogies trois essieux Bahnanwendungen - Vermessung von Gterwagen beim Neubau und bei Umbauten - Teil 5: Drehgestelle mit 3 Radstzen This European Standard was approve
9、d by CEN on 1 April 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stan
10、dards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to
11、 the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, N
12、orway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and b
13、y any means reserved worldwide for CEN national Members. Ref. No. EN 13775-5:2004: E EN 13775-5:2004 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope4 2 Normative references.4 3 Terms and definitions 4 4 Symbols and abbreviations.4 5 Requirements.5 5.1 General5 5.2 Precondition.5 5.3 Measuring
14、processes.5 Annex A (normative) Control sheet.15 Annex B (informative) Example of measuring process 1.17 Annex C (informative) Terminology20 Bibliography21 EN 13775-5:2004 (E) 3 Foreword This document EN 13775-5:2004 has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the sec
15、retariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2004, and conflicting national standards shall be withdrawn at the latest by December 2004. This European
16、 Standard EN 13775 “Railway applications Measurement of new and modified freight wagons“ comprises the following parts: Part 1: Measuring principles Part 2: Freight wagons with bogies Part 3: Freight wagons with 2 wheelsets Part 4: Bogies with 2 wheelsets Part 5: Bogies with 3 wheelsets Part 6: Mult
17、iple and articulated freight wagons Annex A is normative, Annexes B to D are informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmar
18、k, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 13775-5:2004 (E) 4 Introduction It is normal practice in all European
19、 countries to carry out checks and measurements on the major components of new and modified freight wagons and bogies. In view of the importance of uniform criteria for international transport in all European countries, this European Standard has been prepared. 1 Scope This European Standard specifi
20、es principles and requirements for measuring bogies with 3 wheelsets. This ensures that the measuring processes are applied in accordance with uniform criteria. It applies to new and modified bogies with 3 wheelsets. Provisions going beyond the scope of these requirements are generally agreed betwee
21、n the contracting parties involved. The measuring processes relate to the bogies with or without add-ons in their entirety or just part of them if the geometrical structure does not permit anything else. Where appropriate, other measuring processes not specified here are necessary and are specified
22、in each individual case. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequen
23、t amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 13775-1:2003, Railway applications Measuring ne
24、w and modified freight wagons Part 1: Measuring principles. 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 13775-1:2003 apply. 4 Symbols and abbreviations For the purposes of this European Standard, the following symbols and abbreviations ap
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13775 2004
链接地址:https://www.31doc.com/p-3739286.html