BS-EN-13126-4-2008.pdf
《BS-EN-13126-4-2008.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13126-4-2008.pdf(14页珍藏版)》请在三一文库上搜索。
1、BS EN 13126-4:2008 ICS 91.190 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Building hardware Requirements and test methods for windows and doors height windows Part 4: Espagnolettes Licensed CopyChinese University of Hong Kong, 11/04/2009 07:15, Uncontrolle
2、d Copy, (c) BSI This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2009 BSI 2009 ISBN 978 0 580 59187 7 Amendments/corrigenda issued since publication DateComments BS EN 13126-4:2008 National foreword This British Standard is the UK imp
3、lementation of EN 13126-4:2008. It supersedes DD CEN/TS 13126-4:2004 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/538/4, Building hardware. A list of organizations represented on this committee can be obtained on request to its secretary. This pu
4、blication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Licensed CopyChinese University of Hong Kong, 11/04/2009 07:15, Uncontrolled Copy, (c
5、) BSI BS EN 13126-4:2008 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13126-4 October 2008 ICS 91.190Supersedes CEN/TS 13126-4:2004 English Version Building hardware - Requirements and test methods for windows and doors height windows - Part 4: Espagnolettes Quincaillerie pour le btiment - E
6、xigences et mthodes dessai des ferrures de fentres et portes-fentres - Partie 4 : Crmones-verrous Baubeschlge - Beschlge fr Fenster und Fenstertren - Teil 4: Kantenverschlsse This European Standard was approved by CEN on 15 August 2008. CEN members are bound to comply with the CEN/CENELEC Internal R
7、egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. T
8、his European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members ar
9、e the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switze
10、rland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No.
11、EN 13126-4:2008: E Licensed CopyChinese University of Hong Kong, 11/04/2009 07:15, Uncontrolled Copy, (c) BSI BS EN 13126-4:2008 EN 13126-4:2008 (E) 2 Contents Page Foreword. 3 1 Scope 4 2 Normative reference . 4 3 Terms and definitions. 4 4 Classification. 4 4.1 General. 4 4.2 Category of use (1 fi
12、rst digit) 4 4.3 Durability (2 second digit). 4 4.4 Mass (3 third digit). 5 4.5 Fire resistance (4 fourth digit) 5 4.6 Safety in use (5 fifth digit). 5 4.7 Corrosion resistance (6 sixth digit) 5 4.8 Security (7 seventh digit) 5 4.9 Application (8 eighth digit) 5 4.10 Test Sizes (9 ninth digit) 5 4.1
13、1 Example of classification for espagnolettes (EN 13126-4). 6 5 Requirements 6 5.1 General. 6 5.2 Durability 6 5.3 Locking point variable tolerance. 7 5.4 Minimum closing device resistance 7 5.5 Corrosion resistance 7 6 Test equipment 8 7 Test methods. 8 7.1 Samples . 8 7.2 Durability test 8 7.2.1 P
14、rocedure 8 7.2.2 Acceptance criteria. 9 7.3 Minimum closing device resistance test 9 7.4 Corrosion resistance 9 Annex A (normative) Flow chart of test procedures. 10 Bibliography . 11 Licensed CopyChinese University of Hong Kong, 11/04/2009 07:15, Uncontrolled Copy, (c) BSI BS EN 13126-4:2008 EN 131
15、26-4:2008 (E) 3 Foreword This document (EN 13126-4:2008) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by
16、 publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by April 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELE
17、C shall not be held responsible for identifying any or all such patent rights. This document supersedes CEN/TS 13126-4:2004. A full contribution to the preparation of this European Standard has been made by the European manufacturers organization ARGE and national standards bodies. This European Sta
18、ndard is one of a series of European Standards for building hardware products. It is divided into several parts incorporating all types of windows and balcony doors. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implem
19、ent this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland a
20、nd the United Kingdom. Licensed CopyChinese University of Hong Kong, 11/04/2009 07:15, Uncontrolled Copy, (c) BSI BS EN 13126-4:2008 EN 13126-4:2008 (E) 4 1 Scope This part of prEN 13126 specifies requirements and test methods for durability, strength, security and function of espagnolettes and thei
21、r striker plates for use on windows and door height windows. NOTE Espagnolettes are defined as a locking mechanism for windows and door height windows that usually have a maximum handle movement of 90. This European Standard does not include door bolts within the scope of EN 12051, or multi-point lo
22、cks with latch and/or dead bolt within the scope of EN 12209. 2 Normative reference The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (
23、including any amendments) applies. EN 1670, Building hardware Corrosion resistance Requirements and test methods EN 12519:2004, Windows and pedestrian doors Terminology EN 13126-1:2006, Building hardware Requirements and test methods for windows and doors height windows Part 1: Requirements common t
24、o all types of hardware ISO 4520, Chromate conversion coatings on electroplated zinc and cadmium coatings 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12519:2004 and the following apply. 3.1 espagnolette locking mechanism for windows and door heigh
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13126 2008
链接地址:https://www.31doc.com/p-3739312.html