BS-EN-12674-3-2004.pdf
《BS-EN-12674-3-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-12674-3-2004.pdf(26页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12674-3:2004 Roll containers Part 3: Test methods The European Standard EN 12674-3:2004 has the status of a British Standard ICS 55.180.10 ? Licensed Copy: London South Bank University, London South Bank University, Sat Mar 17 04:03:52 GMT+00:00 2007, Uncontrolled Copy, (c) BS
2、I BS EN 12674-3:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 March 2007 BSI 2007 ISBN 978 0 580 50382 5 National foreword This British Standard was published by BSI. It is the UK implementation of EN 12674-3:2004, incorporating cor
3、rigendum May 2006. The UK participation in its preparation was entrusted to Technical Committee PKW/0, Packaging. A list of organizations represented on PKW/0 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users a
4、re responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Sat Mar 17 04:03:52 GMT+00:00 2007, Uncon
5、trolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12674-3 October 2004 ICS 55.180.10 English version Roll containers - Part 3: Test methods Conteneurs roulettes - Partie 3: Mthodes dessaiRollbehlter - Teil 3: Prfverfahren This European Standard was approved by CEN on 16 Augu
6、st 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obta
7、ined on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secr
8、etariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Po
9、rtugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and by any means reser
10、ved worldwide for CEN national Members. Ref. No. EN 12674-3:2004: E Incorporating corrigendum May 2006 Licensed Copy: London South Bank University, London South Bank University, Sat Mar 17 04:03:52 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 12674-3:2004 (E) 2 Contents Page Foreword3 1. Scope 5 2.
11、 Normative references5 3. Terms and definitions .5 4. Test methods6 Annex A (informative) Side frame mid-height impact tests20 Licensed Copy: London South Bank University, London South Bank University, Sat Mar 17 04:03:52 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 12674-3:2004 (E) 3 Foreword This
12、 document (EN 12674-3:2004) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2005,
13、and conflicting national standards shall be withdrawn at the latest by April 2005. This draft document is part of a series of 4 documents for roll containers, other parts are titled as follows: Roll containers - Part 1: Terminology Roll containers - Part 2: General design and safety principles Roll
14、containers - Part 4: Performance requirements According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece
15、, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: London South Bank University, London South Bank University, Sat Mar 17 04:03:52 GMT+00:00 2007, Uncontrol
16、led Copy, (c) BSI EN 12674-3:2004 (E) 4 Introduction Roll containers and dollies are equipment intended for moving goods. They comprise apparatus fitted with wheels and/or castors. For roll containers the superstructure comprises two or more frames which provide retention for items requiring transpo
17、rtation and/or distribution. Dollies can be supplied in a variety of materials and additionally roll containers are supplied in four main styles. One of these styles, the Nesting style, is further sub-divided into five derived forms and the Demountable style is sub-divided into 2 derived forms. Part
18、 1 of this document, Terminology, gives details of how these styles differ. Part 2 - General design and safety principles gives methods of measuring working dimensions and aspects of design that manufacturers need to be aware of. The test methods given in this Part 3 are supported by performance lev
19、els in Part 4 which take account of the normal static and dynamic loads applied in use. This Part 3 of the document sub-divides into 3 classes of tests. Clause 4.2 contains the main safety and performance tests for complete roll containers or dollies. Clause 4.3 contains tests on component parts of
20、roll containers and dollies and is intended for quality control purposes. Annex A (informative) covers tests requiring further industry development, which are not yet sufficiently defined to go into the normative section. In general the earlier tests are intended to be the most stringent in order to
21、 achieve early failure in inadequate roll container or dolly designs to cut down on time of design and development. As these tests are type tests and not proof tests, untested roll containers are used for each test rather than risking accumulated damage affecting subsequent results. This will result
22、 in a better understanding of weak design features and the exact mechanical cause of each failure. There is no intention in this document to test for the effects of long-term roll container or dolly wear by using extended or cyclic repeat tests other than the tests in 4.3 on steel welds where the pr
23、incipal objective is to examine fatigue. Licensed Copy: London South Bank University, London South Bank University, Sat Mar 17 04:03:52 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 12674-3:2004 (E) 5 1. Scope This document covers the load testing of roll containers and dollies for safety, fitness f
24、or purpose and the development of new designs. All designs, styles and derived forms of roll containers and dollies intended for fitment of sides or not are subject to certain of the tests in Part 3, as stipulated in Part 4. Also included in the scope are roll containers partly made from non-metalli
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 12674 2004
链接地址:https://www.31doc.com/p-3739324.html