BS-EN-13815-2006.pdf
《BS-EN-13815-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13815-2006.pdf(64页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13815:2006 Fibrous gypsum plaster casts Definitions, requirements and test methods The European Standard EN 13815:2006 has the status of a British Standard ICS 91.100.10 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 09:22:52 GMT+00:00 2006, Uncontrolled Copy, (c) BS
2、I BS EN 13815:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 September 2006 BSI 2006 ISBN 0 580 49264 8 National foreword This British Standard was published by BSI. It is the UK implementation of EN 13815:2006. The UK participation
3、in its preparation was entrusted by Technical Committee B/544, Plastering, rendering, dry lining, to Subcommittee B/544/1, Gypsum plasters, cast gypsum and ancillaries. A list of organizations represented on B/544/1 can be obtained on request to its secretary. This publication does not purport to in
4、clude all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 09:2
5、2:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13815 August 2006 ICS 91.100.10 English Version Fibrous gypsum plaster casts - Definitions, requirements and test methods Produits en staff - Dfinitions, prescriptions et mthodes dessai Formteile aus
6、 faserverstrktem Gips - Begriffe, Anforderungen und Prfverfahren This European Standard was approved by CEN on 19 June 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard wi
7、thout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language
8、 made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germ
9、any, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG
10、 Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13815:2006: E Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 09:22:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN
11、 13815:2006 (E) 2 Contents Page Foreword. 4 Introduction 5 1 Scope . 6 2 Normative references . 7 3.1 General terms and definitions. 8 3.2 Technical terms and definitions 8 4 Classifications. 12 4.1 Categories of production . 12 4.2 Product ranges 12 5 Requirements 13 5.1 Fire behaviour . 13 5.2 Dan
12、gerous substances 13 5.3 Impact resistance 13 5.4 Protection against noise 13 5.5 Energy economy and heat retention. 14 5.6 Constituents 14 5.7 Appearances 19 5.8 Thickness of the prime layer (fibrous plaster firstings) . 20 5.9 Handling framework . 20 5.10 Resistance to impact by a hard steel ball
13、and cohesion 20 5.11 Moisture content. 20 5.12 pH . 21 5.13 Surface hardness 21 5.14 Interior architectural casts or technical function casts - Additional requirements. 21 5.15 Units - Additional requirements 22 6 Test methods. 24 6.1 Sampling 24 6.2 Conditioning of samples 24 6.3 Checking of the mo
14、ulding definition of the face . 24 6.4 Prime layer thickness checking 26 6.5 Checking the resistance to impact by a hard steel ball and the cohesion. 27 6.6 Moisture content. 29 6.7 pH measurement. 29 6.8 Surface hardness measurement . 30 6.9 Measurement of the thickness of interior architectural or
15、 technical function casts. 31 6.10 Unit length measurement. 32 6.11 Unit width measurement 32 6.12 Unit thickness measurement. 33 6.13 Checking of unit angle squareness 34 6.14 Checking of unit face flatness. 35 6.15 Determination of unit mass and checking of mass per unit area 38 7 Evaluation of co
16、nformity 38 7.1 General. 38 7.2 Type testing. 39 7.3 Factory production control (FPC) . 41 8 Designation of the products 42 8.1 Designation of the interior architectural casts and technical function casts 42 8.2 Designation of the units. 43 9 Marking, labelling and packaging . 43 Licensed Copy: shef
17、fieldun sheffieldun, na, Mon Oct 30 09:22:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13815:2006 (E) 3 Annex A (informative) Sampling procedure for testing44 Annex B (normative) Design values of thermal conductivity of gypsum plaster46 Annex C (normative) Factory Production Control (FPC)47 Anne
18、x ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives52 ZA.1 Scope and characteristics concerned.52 Product : fibrous gypsum plaster casts.53 Intended uses : see clause 1.53 ZA.2 Attestation and declaration of conformity of fibrou
19、s gypsum plaster casts 54 ZA.2.1 General54 ZA.3 CE marking and labelling58 Bibliogaphy .60 Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 09:22:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13815:2006 (E) 4 Foreword This document (EN 13815:2006) has been prepared by Technical Committee CE
20、N/TC 241 “Gypsum and gypsum based products”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2007, and conflicting national standards shall be w
21、ithdrawn at the latest by May 2008. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative annex ZA which is an inte
22、gral part of this document. This document replaces no existing European Standard. This European Standard includes: an informative annex A concerning sampling procedure for testing; an normative annex B on the thermal conductivity of the gypsum plaster; an normative annex C concerning factory product
23、ion control ; an informative annex D illustrating the scope of this standard with regard to the classification of the categories of production of the fibrous gypsum plaster casts and to the intended uses; an informative annex ZA : providing information for regularity marking. According to the CEN/CE
24、NELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Ma
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13815 2006
链接地址:https://www.31doc.com/p-3739325.html