BS-EN-13183-2-2002.pdf
《BS-EN-13183-2-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13183-2-2002.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13183-2:2002 Incorporating Corrigendum No. 1 Moisture content of a piece of sawn timber Part 2: Estimation by electrical resistance method The European Standard EN 13183-2:2002 has the status of a British Standard ICS 79.040 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Oc
2、t 30 05:24:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13183-2:2002 This British Standard, having been prepared under the direction of the Building and Civil Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on
3、10 May 2002 BSI 18 December 2003 ISBN 0 580 39691 6 National foreword This British Standard is the official English language version of EN 13183-2:2002, including Corrigendum September 2003. The UK participation in its preparation was entrusted by Technical Committee B/543, Round and sawn timber, to
4、 Subcommittee B/543/1, Timber terminology and measurement, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to
5、in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract
6、. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or propos
7、als for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI co
8、pyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 14848 Corrigendum No. 1 18 December 2003Correction to Clause 7 and Figure 1 Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:24:51 GMT+00:00 2006, U
9、ncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13183-2 April 2002 ICS 79.040 incorporating corrigendum September 2003 English version Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method Teneur en humidit dune pice de bois sc
10、i - Partie 2: Estimation par mthode lectrique par rsistance Feuchtegehalt eines Stckes Schnittholz - Teil 2: Schtzung durch elektrisches Widerstands-Messverfahren This European Standard was approved by CEN on 29 December 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations
11、 which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European S
12、tandard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national sta
13、ndards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KO
14、MITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13183-2:2002 E Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:24:51 GMT+00:00 2006, Uncontrolled
15、 Copy, (c) BSI EN 13183-2:2002 (E) 2 Contents page 1SCOPE3 2NORMATIVE REFERENCES3 3TERMS AND DEFINITIONS4 4LIMITS OF APPLICATION4 5APPARATUS4 6COMPLIANCE4 7PROCEDURE4 8EXPRESSION OF RESULTS5 ANNEX A (INFORMATIVE) MOISTURE CONTENT OF A LOT6 Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:24
16、:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13183-2:2002 (E) 3 Foreword This document EN 13183-2 has been prepared by CEN/TC 175 “Round and sawn timber”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of
17、 an identical text or by endorsement, at the latest by October 2002, and conflicting national standards shall be withdrawn at the latest by October 2002. This standard is one of a series, dealing with methods of measurement for round timber and sawn timber. Other standards in this series are: EN 131
18、83-1:Moisture content of a piece of sawn timber ? 1: Determination by oven dry method. EN 1309-1:Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber. EN 1310:Round and sawn timber - Method of measurement of features. EN 1311:Round and sawn timber - Method of measurement
19、 of biological degrade. Annex A is informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Irel
20、and, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 1 Scope This European Standard defines a non-destructive method for estimating the moisture content of a piece of sawn timber using an electrical resistance moisture meter. This standard
21、applies to sawn timber, and timber which has been planed or mechanically surfaced by other means. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text,
22、and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (includ
23、ing amendments). EN 844-1, Round and sawn timber - Terminology - Part 1: General terms common to round timber and sawn timber. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:24:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13183-2:2002 (E) 4 EN 844-3, Round and sawn timber - Terminolog
24、y - Part 3: General terms relating to sawn timber. EN 844-4, Round and sawn timber - Terminology - Part 4: Terms relating to moisture content. EN 844-6, Round and sawn timber - Terminology - Part 6: Terms relating to dimensions of sawn timber. EN 844-7, Round and sawn timber - Terminology - Part 7:
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13183 2002
链接地址:https://www.31doc.com/p-3739404.html