BS-EN-15012-2007.pdf
《BS-EN-15012-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-15012-2007.pdf(32页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 15012:2007 Plastics piping systems Soil and waste discharge systems within the building structure Performance characteristics for pipes, fittings and their joints ICS 23.040.01; 91.140.80 ? Copyright British Standards Institution Provided by IHS under license with BSI - Uncont
2、rolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:53:35 MDTNo reproduction or networking permitted without license from IHS -,-,- BS EN 15012:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2008 BSI 2006 ISB
3、N 978 0 580 54577 1 National foreword This British Standard is the UK implementation of EN 15012:2007. The UK participation was entrusted by Technical Committee PRI/88, Plastics piping systems, to Subcommittee PRI/88/1, Plastic piping for non-pressure applications. This British Standard is intended
4、as a means of demonstrating compliance with the Construction Products Directive (89/106/EEC), and affixing the CE mark. The Essential Requirements contained in this British Standard are concepts related to the Construction Products Directive, and they are not necessarily indicative of all the perfor
5、mance requirements or service conditions likely to be encountered in a particular pipework application. The CE mark only indicates that a product may be legally placed on the market in the EU. It does not indicate or guarantee inherent quality of the CE marked pipework components. Compliance with th
6、is British Standard does not therefore necessarily mean that products bearing the CE mark are fit for a particular intended purpose. It should also be noted that manufacturers are entitled to declare “No Performance Determined” (NPD) against some or all of these Essential Requirements (if there is n
7、o corresponding national legislation to those product characteristics) and yet still affix the CE mark to their products. Users are advised to check the background details with the manufacturers claims for the CE marked products. Such details may be available on an appropriate internet website, acco
8、mpanying labelling or other company documentation. This British Standard does not replace the corresponding BS EN Product Standards (see Annex B), which do contain detailed performance requirements for pipes, fittings and joints manufactured from particular plastics materials. The UK Approved Docume
9、nts to the Building Regulations limit the use of plastic products by fire resistance testing and do not require fire reaction testing as detailed in this standard. There is therefore no UK requirement for mandatory third-party certification for CE marked products to this standard. The UK Approved Do
10、cument H for “drainage and waste disposal” gives guidance on materials for sanitary pipework. On the basis of this it is the advice of PRI/88/1 that thermoplastics sanitary pipework conforming to BS EN 15012 should meet the following performance criteria when being placed on the UK market. Amendment
11、s/corrigenda issued since publication DateComments Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:53:35 MDTNo reproduction or networking permitted without license from IHS -,-,- BS EN 1501
12、2:2007 BSI 2008 i Performance criteria of pipework conforming to both BS EN 15012 and Approved Document H Other product standards that may be used in addition to those listed in Annex B are listed below: BS 4514:2001, Unplasticized PVC soil and ventilating pipes of 82.4 mm minimum mean outside diame
13、ter, and fittings and accessories of 82.4 mm and of other sizes Specification BS 5254:1976, Specification for polypropylene waste pipe and fittings (external diameter 34.6 mm, 41.0 mm and 54.1 mm) BS 5255:1989, Specification for thermoplastics waste pipe and fittings A list of organizations represen
14、ted on PRI/88/1 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Reaction to fire
15、NPD Dimensional tolerances interchangeability External diameters to be in accordance with the thermoplastics soil and waste discharge standards listed in Annex B (this list incorporates the thermoplastic standards referred to in Table 4 of Part H of the Approved Document to the Building Regulations)
16、 TightnessLeak tight, after testing in accordance with BS EN 1053 and BS EN 1054 DurabilityHot and cold cycling tests in accordance with EN 1055 Stiffness only for class BD SN 4 minimum in accordance with ISO 13966 Release of dangerous substances NPD Copyright British Standards Institution Provided
17、by IHS under license with BSI - Uncontrolled Copy Licensee=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:53:35 MDTNo reproduction or networking permitted without license from IHS -,-,- blank Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Licen
18、see=Boeing Co/5910770001 Not for Resale, 08/14/2008 20:53:35 MDTNo reproduction or networking permitted without license from IHS -,-,- EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15012 October 2007 ICS 23.040.01; 91.140.80 English Version Plastics piping systems - Soil and waste discharge s
19、ystems within the building structure - Performance characteristics for pipes, fittings and their joints Systmes de canalisations en plastique - Systmes pour lvacuation des eaux-vannes et des eaux uses lintrieur de la structure des btiments - Caractristiques de performance pour tubes, raccords et leu
20、rs assemblages Kunststoff-Rohrleitungssysteme - Rohrleitungssysteme zum Ableiten von Abwasser innerhalb der Gebudestruktur - Eigenschaften fr die Gebrauchstauglichkeit von Rohren, Formstcken und deren Verbindungen This European Standard was approved by CEN on 23 August 2007. CEN members are bound to
21、 comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Ma
22、nagement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status a
23、s the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Sl
24、ovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any means reserved worldw
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 15012 2007
链接地址:https://www.31doc.com/p-3739455.html