BS-EN-13113-2002.pdf
《BS-EN-13113-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13113-2002.pdf(42页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13113:2002 Tannery machines Roller coating machines Safety requirements The European Standard EN 13113:2002 has the status of a British Standard ICS 59.140.40 ? BS EN 13113:2002 This British Standard, having been prepared under the direction of the Engineering Sector Policy an
2、d Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 25 September 2002 BSI 25 September 2002 ISBN 0 580 40474 9 National foreword This British Standard is the official English language version of EN 13113:2002. The UK participation in its preparat
3、ion was entrusted to Technical Committee MCE/3/11, Tannery machines Safety, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publication
4、s referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary
5、 provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpret
6、ation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 39 and a back cover. The BSI copyrig
7、ht date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13113 April 2002 ICS 59.140.40 English version Tannery machines - Roller coating machines - Safety requiremen
8、ts Machines de tannerie - Machines denduction rouleaux - Prescriptions de scurit Gerberei-Maschinen - Walzenauftragmaschinen - Sicherheitsanforderungen This European Standard was approved by CEN on 27 December 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stip
9、ulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exi
10、sts in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodi
11、es of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NO
12、RMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13113:2002 E EN 13113:2002 (E) 2 Contents page Foreword4 Introduction.5 1Scope 5 2Normative references 5 3Terms and de
13、finitions7 4List of hazards8 4.1Mechanical hazards.9 4.1.1Single roller contra-rotating machine9 4.1.2Single roller contra-rotating machine with spreading belts9 4.1.3Single roller synchronised machine9 4.1.4Single roller synchronised machine with spreading belts10 4.1.5Single roller synchronised ma
14、chine with rubberised roller10 4.1.6Single roller contra-rotating / synchronised machine (combined machine) - Ccontra-rotating working configuration.10 4.1.7Single roller contra-rotating / synchronised machine (combined machine) Synchronised working configuration.10 4.2High pressure fluid ejection11
15、 4.3Electrical hazard.11 4.4Slip trip and fall hazard .11 4.5Noise .11 4.6Thermal hazard.12 4.7Roller changing12 4.8Disassembly.12 4.9Belt washing system .12 4.10Sides access.12 5Safety requirements and/or measures 13 5.1General13 5.2Common requirements concerning Roller coating machines13 5.2.1Mech
16、anical equipment 13 5.2.2High pressure fluid ejection14 5.2.3Electrical equipment (for all machines).14 5.2.4Slip, trip and fall hazard 14 5.2.5Noise .14 5.2.6Control system.15 5.2.7Emergency stop equipment15 5.2.8Maintenance and cleaning16 5.2.9Hot surfaces .17 5.2.10Coating roller changing.17 5.2.
17、11Disassembly.17 5.2.12Belt washing system .17 5.2.13Sides access.17 5.3Requirements concerning hazards in the working zone.17 5.3.1Single roller- contra-rotating machine with feeding table (see Figure 2A)17 5.3.2Single roller- contra-rotating machine with spreading belt (see Figure 2B) .18 5.3.3Sin
18、gle roller synchronised machine with feeding table (see Figure 3A) .18 5.3.4Single roller synchronised machine with spreading belts (see Figure 3B).19 5.3.5Single roller synchronised machine with rubberised roller (see Figure 3C).19 5.3.6Single roller contra-rotating /synchronised machine (combined
19、machine) - contra-rotating working configuration (see Figure 4A)19 EN 13113:2002 (E) 3 5.3.7Single roller contra-rotating /synchronised machine (combined machine) - Synchronised working configuration (see Figure 4B)20 6Verification of the safety requirements and/or measures.20 7Information for use29
20、 7.1Instruction Handbook29 7.1.1Machine.29 7.1.2Installation of the machine .29 7.1.3Transportation and Storage of the machine and machine parts30 7.1.4Use of the machine30 7.1.5Maintenance.30 7.2Marking.30 Annex A (normative) Machinery description.37 Annex ZA (informative) Relationship of this docu
21、ment with EC Directives.38 Bibliography39 EN 13113:2002 (E) 4 Foreword This document EN 13113:2002 has been prepared by Technical Committee CEN/TC 200 “Tannery machines and plant - Safety“, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standa
22、rd, either by publication of an identical text or by endorsement, at the latest by October 2002, and conflicting national standards shall be withdrawn at the latest by October 2002. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade As
23、sociation, and supports essential requirements of EC Directive(s). For relationship with EC Directive(s), see informative annex ZA, which is an integral part of this document. Annex A is normative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followi
24、ng countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. EN 13113:2002 (E) 5 Introduction This
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13113 2002
链接地址:https://www.31doc.com/p-3739468.html