BS-EN-12697-11-2005.pdf
《BS-EN-12697-11-2005.pdf》由会员分享,可在线阅读,更多相关《BS-EN-12697-11-2005.pdf(28页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12697-11:2005 Incorporating corrigendum no. 1 Bituminous mixtures Test methods for hot mix asphalt Part 11: Determination of the affinity between aggregate and bitumen The European Standard EN 12697-11:2005 has the status of a British Standard ICS 93.080.20 ? Licensed Copy: Lo
2、ndon South Bank University, London South Bank University, Mon May 07 12:28:19 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 12697-11:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 13 December 2005 BSI 2007 ISBN 0 580 47266 3 National
3、 foreword This British Standard was published by BSI. It is the UK implementation of EN 12697-11:2005, incorporating corrigendum February 2007. It supersedes BS EN 12697-11:2003 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee B/510, Road materials, to
4、 Subcommittee B/510/1, Coated macadam and hot asphalt. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Com
5、pliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments 17050 Corrigendum No. 1 30 April 2007Modification to Clause 8.9 Licensed Copy: London South Bank University, London South Bank University, Mon May 07 12:28:19 GMT+
6、00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12697-11 September 2005 ICS 93.080.20 Incorporating corrigendum February 2007 English Version Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate
7、and bitumen Mlanges bitumineux - Essais pour enrobs chaud - Partie 11: Dtermination de la affinit entre granulation et bitume Asphalt - Prfverfahren fr Heiasphalt - Teil 11: Bestimmung der Affinitt von Gesteinskrnungen und Bitumen This European Standard was approved by CEN on 4 August 2005. CEN memb
8、ers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicati
9、on to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the s
10、ame status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
11、 Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CENAll rights of exploitation in any form and by any means reserved worldwide for
12、 CEN national Members. Ref. No. EN 12697-11:2005: E Supersedes EN 12697-11:2003 Licensed Copy: London South Bank University, London South Bank University, Mon May 07 12:28:19 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 12697-11:2005 (E) 2 Contents Page Foreword 4 1 Scope.6 2 Normative references .
13、6 3 Terms and definitions.7 4 Principle.8 5 Equipment .9 5.1 Test sieves.9 5.2 Ventilated oven .9 5.3 Temperature measuring device:9 5.4 Balance9 5.5 Metal containers (tins)9 5.6 Mixing bowl .9 5.7 Spatula.9 5.8 Silicone coated paper or a flat metal lid9 5.9 Refrigerator .10 5.10 Test bottles10 5.11
14、 Glass-rods.10 5.12 Bottle rolling machine 10 5.13 Glass beakers10 5.14 Test bowls .10 5.15 Lamp11 5.16 Magnifying glass.11 6 Preparation of test specimens.11 6.1 Aggregate11 6.2 Bitumen .12 6.3 Mixing aggregate and bitumen 12 7 Conditioning13 8 Procedure13 9 Calculation and expression of results.14
15、 10 Report 14 11 Precision15 12 Equipment .16 12.1 Shallow tray(s) 16 12.2 Mixing bowl .16 12.3 Heating apparatus.16 13 Solvent and other materials.16 14 Preparation of test specimens.16 15 Procedure16 16 Calculation and expression of results.17 17 Report 17 18 Precision17 19 Equipment and materials
16、18 19.1 Test sieves.18 Licensed Copy: London South Bank University, London South Bank University, Mon May 07 12:28:19 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 12697-11:2005 (E) 3 19.2 Ventilated oven .18 19.3 Temperature measuring device .18 19.4 Balance18 19.5 Metal containers (tins)18 19.6 Mi
17、xing bowl .18 19.7 Glass and polyethylene beakers18 19.8 Titration burette 18 19.9 Chronometer .19 19.10 Gloves19 19.11 Netting .19 19.12 Reagents19 19.13 Heating plate or Bunsen burner.20 19.14 Distilled or de-mineralised water.20 20 Sample preparation.20 20.1 Aggregate20 20.2 Bitumen .20 20.3 Mixi
18、ng aggregate and bitumen 20 21 Conditioning21 22 Test procedure21 22.1 Establishing the acid/base equivalence factor.21 22.2 Establishing the calibration curve.21 22.3 Stripping test.22 23 Calculation.23 23.1 Determination of the calibration curve23 23.2 Calculation of the degree of bitumen coverage
19、24 24 Test report.25 25 Precision25 Licensed Copy: London South Bank University, London South Bank University, Mon May 07 12:28:19 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 12697-11:2005 (E) 4 Foreword This European Standard (EN 12697-11:2005) has been prepared by Technical Committee CEN/TC 227
20、“Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2006, and conflicting national standards shall be withdrawn at the latest by March
21、2006. This European Standard supersedes EN 12697-11:2003. This European Standard is one of a series of standards as listed below: EN 12697-1, Bituminous mixtures Test methods for hot mix asphalt Part 1: Soluble binder content. EN 12697-2, Bituminous mixtures Test methods for hot mix asphalt Part 2:
22、Determination of particle size distribution. EN 12697-3, Bituminous mixtures Test methods for hot mix asphalt Part 3: Binder recovery: Rotary evaporator. EN 12697-4, Bituminous mixtures Test methods for hot mix asphalt Part 4: Binder recovery: Fractionating column. EN 12697-5, Bituminous mixtures Te
23、st methods for hot mix asphalt Part 5: Determination of the maximum density. EN 12697-6, Bituminous mixtures Test methods for hot mix asphalt Part 6: Determination of bulk density of bituminous specimen. EN 12697-7, Bituminous mixtures Test methods for hot mix asphalt Part 7: Determination of bulk d
24、ensity of bituminous specimens by gamma rays. EN 12697-8, Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens. EN 12697-9, Bituminous mixtures Test methods for hot mix asphalt Part 9: Determination of the reference density. EN 12
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 12697 11 2005
链接地址:https://www.31doc.com/p-3739481.html