《BS-EN-13141-3-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13141-3-2004.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13141-3:2004 Ventilation for buildings Performance testing of components/products for residential ventilation Part 3: Range hoods for residential use The European Standard EN 13141-3:2004 has the status of a British Standard ICS 91.140.30; 97.040.20 ? Licensed Copy: sheffieldu
2、n sheffieldun, na, Mon Oct 30 10:27:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13141-3:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 January 2004 BSI 29 January 2004 ISBN 0 580 43329 3 National foreword This British Standar
3、d is the official English language version of EN 13141-3:2004. The UK participation in its preparation was entrusted to Technical Committee RHE/2, Air distribution and air diffusion, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to
4、its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electron
5、ic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to unde
6、rstand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document compris
7、es a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30
8、 10:27:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13141-3 January 2004 ICS 91.140.30; 97.040.20 English version Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residen
9、tial use Ventilation des Btiments - Essais des performances des composants/produits pour la ventilation des logements - Partie 3: Hottes de cuisine pour utilisation domestique Lftung von Gebuden - Leistungsprfungen von Bauteilen/Produkten fr die Lftung von Wohnungen - Teil 3: Dunstabzugshauben fr de
10、n Hausgebrauch This European Standard was approved by CEN on 22 October 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibl
11、iographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility o
12、f a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
13、Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels
14、2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13141-3:2004: E Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 10:27:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13141-3:2004 (E) 2 Contents page Foreword .3 1Scope5
15、2Normative references5 3Terms and definitions .5 4Performance testing of aerodynamic characteristics6 4.1Principle6 4.2Test Installation and Conditions6 4.3Test procedure.6 4.4Analysis of results.6 4.5Presentation of results7 5Performance testing of acoustic characteristics.7 5.1Noise production.7 5
16、.2Insertion loss .7 6Performance testing of grease absorption.8 7Performance testing of odour extraction8 8Performance testing of electrical power.8 8.1Method8 8.2Analysis of results.8 8.3Presentation of results8 9Safety8 Bibliography9 Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 10:27:32
17、GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13141-3:2004 (E) 3 Foreword This document (EN 13141-3:2004) has been prepared by Technical Committee CEN/TC 156 “Ventilation for buildings“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard,
18、 either by publication of an identical text or by endorsement, at the latest by July 2004, and conflicting national standards shall be withdrawn at the latest by July 2004. The standard is one of a series of standards on residential ventilation. The performance characteristics of the components/prod
19、ucts for residential ventilation are given in EN 13142. The position of this standard in the field of mechanical building services is shown in Figure 1. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Euro
20、pean Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy
21、: sheffieldun sheffieldun, na, Mon Oct 30 10:27:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13141-3:2004 (E) 4 Mechanical Building Services Control systems Ventilation and air conditioning systems Heating systems DuctworkAir terminal devices Air handling units Mechanical and natural residential
22、 ventilation Design criteria for the indoor environment System performance Installation Components/products for residential ventilation Required and optional performance characteristics Performance testing of components/products for residential ventilation Simplified calculation methods for resident
23、ial ventilation systems Design and dimensioning for residential ventilation systems Performance testing and installation checks for residential ventilation systems Part 1: Externally and internally mounted air transfer devices Part 2: Exhaust and supply air terminal devices Part 3: Range hoods for r
24、esidential use Part 4: Fans used in residential ventilation systems Part 5: Cowls and roof outlet terminal devices Part 6: Exhaust ventilation system packages used in a single dwelling Part 7 : Mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation syste
25、ms intended for single family dwellings Figure 1 Position of EN 13141-3 in the field of mechanical building services Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 10:27:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13141-3:2003 (E) 5 1 Scope This European Standard specifies methods for m
26、easuring the main performance characteristics of range hoods for residential use. It applies to recirculating range hoods, air extraction range hoods incorporating a fan and air extraction range hoods without fan. This standard does not specify values for performance characteristics. 2 Normative ref
27、erences This European Standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed here after. For dated references, subsequent amendment to or revisions of any of
28、 these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 12792, Ventilation for buildings Symbols, terminology and graphical symbols. EN 13141
29、-2:2003, Ventilation for buildings Performance testing of components/products for residential ventilation Part 2: Exhaust and supply air terminal devices. EN 13141-4:2003, Ventilation for buildings Performance testing of components/products for residential ventilation Part 4: Fans used in residentia
30、l ventilation systems. EN 60335-2-31, Safety of household and similar electrical appliances Part 2: Particular requirements for range hoods (IEC 60335-2-31:1995). ISO 5801, Industrial Fans Performance testing using standardized airways. IEC 61591:1997, Household range hoods Methods for measuring per
31、formance. 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 12792 and EN 13141-2 together with the following definitions apply. 3.1 range hood (cooker hood) device intended to collect contaminated air from above a cooking appliance and either d
32、ischarge it into the room or remove it from the room NOTERange hood may incorporate one or more of the following components: - filters (essential when the contaminated air is discharged into the room); - fan; - fire damper; - non return flow damper. 3.2 recirculating-air range hood range hood contai
33、ning filters to remove contaminants after which the cleaned air is discharged back into the room 3.3 air-extraction range hood range hood which discharges the collected air to the outside of the building by means of ducting Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 10:27:32 GMT+00:00 20
34、06, Uncontrolled Copy, (c) BSI EN 13141-3:2003 (E) 6 3.4 test-voltage voltage to be used for supplying the range hood during the testing 3.5 grease absorption factor measure of the percentage of grease retained within a filter 3.6 odour reduction factor measure of the capability of the range hood to
35、 reduce odours 3.7 odour dispersion time time taken to reduce odour to a defined level after odour generating source has been switched off 4 Performance testing of aerodynamic characteristics 4.1 Principle The test consists in measuring the volume flow rates induced through the device at several val
36、ues of the pressure difference across the device in order to define the flow rate/pressure characteristic curve. Tests shall be carried out with all new filters. Range hoods not incorporating a fan shall be tested according to the Exhaust/Supply Air Terminal Device test method, described in EN 13141
37、-2:2003, clause 4. Where reference is made to existing test methods, care shall be taken in the installation of the range hood because its dimensions could be much larger than those of other air terminal devices. 4.2 Test Installation and Conditions For the recirculating-air range hood, the test ins
38、tallation and conditions shall conform to 4.2 of prEN 14134-4:2003 under Category A conditions. For the air-extraction range hood (incorporating a fan), the test installation and conditions shall conform to 4.2 of EN 13141-4:2003 under Category B conditions. The air-extraction range hood shall be co
39、nnected to ductwork which gives a pressure drop of 30 Pa through the ductwork at maximum flow rate. 4.3 Test procedure The test procedure shall conform to 4.3 of EN 13141-4:3003. Measurements shall be made at the lowest and highest air flow rate settings, and for any other level specified by the man
40、ufacturer. Where a single value is assigned by the manufacturer as rated voltage, this shall be the test voltage. Where a voltage range is assigned to the product by the manufacturer that includes 230 V, the test voltage shall be 230 V. This voltage shall be maintained to 1 % throughout the testing.
41、 4.4 Analysis of results Analysis of the results shall conform to 4.4 of EN 13141-4:2003, for the determination of the flow rate/pressure characteristic curves. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 10:27:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13141-3:2003 (E) 7 The volume
42、tric airflow rate of the range hood shall then be determined, for each setting of fan speed, by the intersection between the characteristic curve and the air flow/pressure curves of two standard duct systems. 4.5 Presentation of results Results shall be presented according to 4.4 of EN 13141-4:2003.
43、 5 Performance testing of acoustic characteristics 5.1 Noise production 5.1.1 Principle When operating, the range hood generates noise, some of which is radiated into the room. The method described below allows to determine the acoustic power level of the noise thus emitted. Range hoods not incorpor
44、ating a fan shall be tested according to the Exhaust Air Terminal Device test method specified in 5.1 of EN 13141-2:2003. 5.1.2 Test installation and conditions Test installation and conditions shall conform to 5.1 of EN 13141-2:2003 with the following arrangements: for the recirculating-air range h
45、ood, the complete device shall be located in the reverberant room where the measurements are made. There shall be no connection with the second room; for the air-extraction range hood (incorporating a fan), a duct with a nominal length of 1,8 m shall be connected to the device and positioned in the
46、adjacent reverberant room; due to the size of the range hood and its position in a room in normal use, the position of the range hood in/on the wall separating the 2 reverberant rooms shall be at a minimum distance of 1 m from all other walls, and preferably away from any symmetry axis of the room.
47、5.1.3 Test procedure The test shall be carried out in accordance with 5.1 of EN 13141-2:2003. 5.1.4 Presentation of results The results shall be presented according to 5.3 of EN 13141-2:2003. 5.2 Insertion loss 5.2.1 Principle The following test quantifies the sound attenuation through a range hood,
48、 the objective being to allow the evaluation of sound transmission from one dwelling to another through the ventilation duct. This test is therefore not required for recirculating air range hoods. NOTEFor a range hood incorporating a fan, it is assumed that when the fan is operating, the noise trans
49、mission is less significant than the noise production determined in 5.1. 5.2.2 Test installation and conditions The test shall conform to 5.2.2 of EN 13141-2:2003. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 10:27:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13141-3:2003 (E) 8 5.2.3 Test procedure The test shall be carried out in accordance with 5.2.3 of EN 13141-2:2003. 5.2.4 Analysis of results Analysis of the results shall conform to 5.2.4 of EN 13141-2:2003
链接地址:https://www.31doc.com/p-3739506.html