BS-EN-13126-11-2008.pdf
《BS-EN-13126-11-2008.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13126-11-2008.pdf(16页珍藏版)》请在三一文库上搜索。
1、BS EN 13126-11:2008 ICS 91.190 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Building hardware Requirements and test methods for windows and doors height windows Part 11: Top hung projecting reversible hardware Licensed CopyChinese University of Hong Kong, 1
2、1/04/2009 07:15, Uncontrolled Copy, (c) BSI This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2009 BSI 2009 ISBN 978 0 580 67206 4 Amendments/corrigenda issued since publication DateComments BS EN 13126-11:2008 National foreword This B
3、ritish Standard is the UK implementation of EN 13126-11:2008. It supersedes DD CEN TS 13126-11:2004 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/538/4, Building hardware. A list of organizations represented on this committee can be obtained on re
4、quest to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Licensed CopyChinese University of Hong Kong, 11/04/20
5、09 07:15, Uncontrolled Copy, (c) BSI BS EN 13126-11:2008 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13126-11 November 2008 ICS 91.190Supersedes CEN/TS 13126-11:2004 English Version Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung pr
6、ojecting reversible hardware Quincaillerie pour le btiment - Exigences et mthodes dessai des ferrures de fentres et portes-fentres - Partie 11: Ferrures pour ouvrants litalienne rversibles axe horizontal suprieur Baubeschlge - Beschlge fr Fenster und Fenstertren - Anforderungen und Prfverfahren - Te
7、il 11: Umkehrbeschlge fr auskragende Schwing- Klappflgelfenster This European Standard was approved by CEN on 5 October 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard w
8、ithout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other langu
9、age made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finlan
10、d, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOM
11、ITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13126-11:2008: E Licensed CopyChinese University of Hong Kong, 11/04/2009 07:15, Uncontrolled Copy, (c) BSI
12、BS EN 13126-11:2008 EN 13126-11:2008 (E) 2 Contents Page Foreword3 1 Scope.5 2 Normative references 5 3 Terms and definitions5 4 Classification6 4.1 General6 4.2 Category of use (1 first digit).6 4.3 Durability (2 second digit)6 4.4 Mass (3 third digit)6 4.5 Fire resistance (4 fourth digit).6 4.6 Sa
13、fety in use (5 fifth digit)6 4.7 Corrosion resistance (6 sixth digit).6 4.8 Security (7 seventh digit) .6 4.9 Application (8 eighth digit).6 4.10 Test sizes Size limitations (9 ninth digit).6 4.11 Example of classification for top hung projecting reversible hardware7 5 Requirements .7 5.1 General7 5
14、.2 Integrated restrictors.7 5.3 Ease of sash movement test.7 5.4 Durability test .8 5.5 Static load test8 6 Test equipment.8 7 Test methods8 7.1 Samples 8 7.2 Ease of sash movement test procedure9 7.3 Durability test procedure.9 7.4 Static load test procedure.10 7.5 Corrosion resistance.10 Annex A (
15、informative) Test method diagrams11 Annex B (normative) Flow chart of test procedure12 Licensed CopyChinese University of Hong Kong, 11/04/2009 07:15, Uncontrolled Copy, (c) BSI BS EN 13126-11:2008 EN 13126-11:2008 (E) 3 Foreword This document (EN 13126-11:2008) has been prepared by Technical Commit
16、tee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflictin
17、g national standards shall be withdrawn at the latest by May 2009. This document supersedes CEN/TS 13126-11:2004. This European Standard is one of a series of European Standards dedicated to building hardware products. A full contribution to the preparation of this European Standard has been made by
18、 the European manufacturers organization “ARGE” and national standards bodies. EN 13126 Building hardware Requirements and test methods for windows and doors height windows consists of the following parts: Part 1: Requirements common to all types of hardware Part 2: Casement fastener handles1) Part
19、3: Manoeuvring fittings for espagnolette bolts/sliding button1) Part 4: Espagnolette bolts1) Part 5: Devices that restrict the opening of windows1) Part 6: Variable geometry stay hinges (with or without a friction system) Part 7: Finger catches Part 8: Tilt Digit 2 durability grade 5 (25 000 cycles)
20、; Digit 3 mass 60 kg; Digit 4 fire resistance grade 0 (no requirements); Digit 5 safety in use grade 1; Digit 6 corrosion resistance grade 3; Digit 7 security - (no requirements); Digit 8 applicable part tested in accordance with Part 11 of this standard; Digit 9 test sizes S.R.W.1) = 1 500 mm, S.R.
21、H.2) = 1 500 mm 5 Requirements 5.1 General The requirements for top hung projecting reversible hardware shall be in accordance with Clause 5 of EN 13126-1:2006. 5.2 Integrated restrictors Where top hung projecting reversible hardware is fitted with an integrated restrictor the hardware shall be test
22、ed in accordance with CEN/TS 13126-5. 5.3 Ease of sash movement test The test specified in 7.2 shall be used to determine the forces required to operate the hardware is appropriate for the intended use. On completion of the ease of sash movement test in accordance with 7.2. Licensed CopyChinese Univ
23、ersity of Hong Kong, 11/04/2009 07:15, Uncontrolled Copy, (c) BSI BS EN 13126-11:2008 EN 13126-11:2008 (E) 8 Force required to initiate movement in either the opening or closing direction shall not have exceeded 100 N. Force required to sustain movement in either the opening or closing direction sha
24、ll not have exceeded 100 N. 5.4 Durability test The test specified in 7.3 shall be used to ensure the hardware is capable of continued operation after cycling in accordance with grades specified in 7.3, with regard given to normal maintenance. On completion of the durability test in accordance with
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13126 11 2008
链接地址:https://www.31doc.com/p-3739579.html