《BS-EN-12854-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-12854-2003.pdf(44页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12854:2003 Food processing machinery Beam mixers Safety and hygiene requirements The European Standard EN 12854:2003 has the status of a British Standard ICS 67.260 ? BS EN 12854:2003 This British Standard was published under the authority of the Standards Policy and Strategy
2、Committee on 30 May 2003 BSI 30 May 2003 ISBN 0 580 41955 X National foreword This British Standard is the official English language version of EN 12854:2003. The UK participation in its preparation was entrusted by Technical Committee MCE/3, Safeguarding of machinery, to Subcommittee MCE/3/5, Food
3、industry machines Safety, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in
4、the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsibl
5、e for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK
6、 interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 40, an inside back cover and a back cover. The BSI copyright date displayed in this
7、 document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12854 May 2003 ICS 67.260 English version Food processing machinery - Beam mixers - Safety and hygiene requirements Machines pour les
8、produits alimentaires - Broyeurs verticaux moteur monts sur chariot - Prescriptions relatives la scurit et lhygine Nahrungsmittelmaschinen - Rsselmixer mit flexibler Welle - Sicherheits- und Hygieneanforderungen This European Standard was approved by CEN on 17 January 2003. CEN members are bound to
9、comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Managem
10、ent Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the off
11、icial versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTE
12、E FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12854:2003 E EN 12854:2003 (E) 2 Content
13、s Page Foreword3 Introduction.4 1Scope 5 2Normative references 6 3Terms and definitions - Description 7 4List of significant hazards.9 5Safety and hygiene requirements and/or measures 10 6Verification of the safety and hygiene requirements and/or measures.16 7Information for use 17 Annex A (normativ
14、e) Noise test code for beam mixers (Grade 2 of accuracy) .19 Annex B (normative) Principles of design to ensure the cleanability of beam mixers.21 Annex ZA (informative) Relationship of this document with EC Directives.39 Bibliography40 EN 12854:2003 (E) 3 Foreword This document (EN 12854:2002) has
15、been prepared by Technical Committee CEN/TC 153 “Food processing machinery - Safety and hygiene specifications“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the late
16、st by November 2003, and conflicting national standards shall be withdrawn at the latest by November 2003. It is one of a series of standards on the design and construction of machines used in catering: ? vegetable cutting machines; ? catering attachments for machines having an auxiliary drive hub;
17、? food processors and blenders; ? hand-held blenders and whisks; ? beam mixers; ? salad dryers; ? vegetable peelers; ? cooking kettles equipped with stirrer and/or mixer. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association,
18、and supports essential requirements of EC Directive(s). For relationship with EC Directive(s), see informative annex ZA, which is an integral part of this document. The annexes A and B are normative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the follo
19、wing countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. EN 12854:2003 (E
20、) 4 Introduction The use of beam mixers generates various mechanical and other hazards. Their extensive use justifies the need of a standard covering both safety and the hazards of food hygiene arising from machine design, complementary to EN 1672-2 which states general hygiene requirements for food
21、 processing machines. This standard is a harmonised standard which provides one means of conformity with the essential safety and hygiene requirements of the Machinery Directive and associated EFTA Regulations. This European standard is a type C standard as stated in EN 1070:1998. The machinery conc
22、erned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the
23、provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. EN 12854:2003 (E) 5 1 Scope 1.1 This European standard specifies the safety and hygiene requirements for the design and manufacture of beam mixers. Beam mixers are u
24、sed in the catering industry for the preparation of mixture or emulsion, directly in the cooking pan, such as for : puree, mayonnaise, sauces, soups, compotes. It applies to the design, installation, operation and maintenance of such machines when they are used to operate under the intended conditio
25、ns of use as defined in 3.12 of EN 292-1:1991 and stated in the instruction handbook (see 7.1), including cleaning, and changing the tools. 1.2 This European standard does not apply to: ? domestic machines; ? portable hand-held blenders and whisks which are covered by a specific standard (see EN 128
26、53:2001). 1.3 This standard covers significant hazards at such machines, as identified by risk assessment (see EN 1050:1996), which are listed in clause 4 of this standard. 1.4 This European standard does not deal with the vibration hazard. 1.5 This European standard applies primarily to the machine
27、s which are manufactured after its date of issue. EN 12854:2003 (E) 6 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are list
28、ed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment of revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 29
29、2-1:1991, Safety of machinery - Basic concepts, general principles for design - Part 1 : Basic terminology, methodology. EN 292-2:1991, Safety of machinery - Basic concepts, general principles for design - Part 2 : Technical principles and specifications. EN 292-2:1991/A1:1995, Safety of machinery -
30、 Basic concepts, general principles for design - Part 2 : Technical principles and specifications. EN 614-1, Safety of machinery - Ergonomic design principles - Part 1 : Terminology and general principles. EN 954-1:1996, Safety of machinery Safety-related parts of control systems - Part 1 : General
31、principles for design. EN 1070:1998, Safety of machinery Terminology. EN 1088:1995, Safety of machinery - Interlocking devices associated with guards - Principles for design and selection. EN 1672-2:1997, Food processing machinery - Basic concepts - Part 2 : Hygiene requirements. EN 61000-6-1, Elect
32、romagnetic compatibility (EMC) Part 6-1: Generic Standards: Immunity for Residential, commercial and light industrial environments (IEC 61000-6-1:1997 modified). EN 61000-6-2, Electromagnetic compatibility (EMC) Part 6-2: Generic Standards: Immunity for Industrial environments (IEC 61000-6-2:1999 mo
33、dified). . EN 61000-6-3, Electromagnetic compatibility (EMC) Part 6-3: Generic Standards: Emission standard for Residential, commercial and light industrial environments (IEC 61000-6-3:1996 modified). EN 61000-6-4, Electromagnetic compatibility (EMC) Part 6-4: Generic Standards: Emission standard fo
34、r industrial environments (IEC 61000-6-4:1997 modified). EN 60204-1:1997, Safety of machinery - Electrical equipment of machines - Part 1: General requirements. (IEC 60204-1:1997) EN 60529, Degrees of protection provided by enclosures (IP code) (IEC 60529:1989). EN 60947-2:1996, Low-voltage switchge
35、ar and controlgear - Part 2 : Circuit - Breakers. (IEC 60947-2:1995) EN ISO 3744:1995, Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) EN ISO 4287, Geometrical product spec
36、ifications (GPS) Surface texture: profile method Terms, definitions and surface texture parameters (ISO 4287:1997). EN ISO 4871, Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11201:1995, Acoustics - Noise emitted by machinery and
37、equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995) EN 12854:2003 (E) 7 3 Terms and definitions - Description 3.1 Terms and definitions For the purposes
38、 of this European Standard, the terms and definitions given in EN 1070:1998 and the following apply. 3.1.1 mobile trolley part of the machine allowing the appliance to be moved around, generally equipped with castors 3.1.2 head carrier tube containing the components which transmit the motors power t
39、o the work head 3.1.3 work head set of parts which process the products 3.1.4 operating handle bar allowing the work head to be moved to all parts of the interior of the pan 3.1.5 clamping handle device which locks the head carrier 3.1.6 stator fixed part of the work head sometimes fitted with a sie
40、ve, the latter being perforated in a manner appropriate for the processing of the intended product 3.1.7 tool rotor with blades or paddles inside the stator 3.1.8 head protecting device fixed guard protecting the rotating tool 3.1.9 beam assembly of the head carrier, the work head, the motor and the
41、 operating handle 3.2Description of beam mixers Beam mixers usually consist of the following parts as shown in Figure 1. EN 12854:2003 (E) 8 Key 1Mobile trolley6Start/stop devices 2Head carrier7Clamping handle 3Work head8Stator 4Motor9Tool 5Operating handle10Head protecting device Figure 1 Example o
42、f a typical beam mixer EN 12854:2003 (E) 9 4 List of significant hazards 4.1 General This standard covers the significant hazards related to intended conditions of use. NOTEIf the machine is not to be used as described in clause 7 of this standard, the manufacturer should, when he is informed of suc
43、h a situation, check on the basis of a new risk analysis that the preventive measures remain valid and sufficient. 4.2 Mechanical hazards 4.2.1 Access to the danger zones Mechanical hazards arise from contact with the rotating tool (see Figure 1, item 9 and 3.1.7). The hazards may arise in (Figure 2
44、) : ? Zone 1 : working zone Hazard of cutting fingers ? Zone 2 : motor and drive mechanism Hazard of crushing or trapping hands. ? Zone 3 : hinge area of the beam Hazards of crushing and entanglement of hands and fingers. ? Zone 4 : ejection of the tool in the event of breakage Hazard of cutting or
45、penetration to body 1Zone 1 2Zone 2 3Zone 3 4Zone 4 Figure 2 Hazard zones EN 12854:2003 (E) 10 4.2.2 Loss of stability Hazards of crushing and impact to the body. 4.2.3 Incorrect assembly and fitting of tool Hazards of cutting and impact to fingers and hands. 4.3 Electrical hazards Hazards of shock
46、by direct or indirect contact with live parts and unexpected start up from restoration of energy supply after interruption. Emission of EMC disturbances interfering with safety arrangements of other machines. 4.4 Hazards generated by neglecting hygiene in machine design 4.4.1 Hazards to the operator
47、 Hazards from the food being processed, e.g. inhalation of flour, sugar, and from the cleaning agents used to disinfect the machine. 4.4.2 Hazards to the consumer Inability to clean food and splash areas effectively and thoroughly. Contamination of the food by undesirable materials including residue
48、s of food, microbiological organisms as well as residues of cleaning and disinfecting fluids. 4.5 Hazards generated by neglecting ergonomic principles in machine design Neglecting ergonomic principles can cause mistake in operation of controls and physical injury to the operator due to over-reaching
49、, heavy loads, akward posture, etc. 4.6 Noise Noise can be a hazard resulting in: ? permanent loss of hearing; ? tinnitus; ? tiredness, stress, etc. 5 Safety and hygiene requirements and/or measures 5.1 General Beam mixers conforming to this standard shall comply with the safety requirements and/or protective measures of this clause. In addition, the machine shall be designed according to the principles of EN 292 for hazards relevant but not significant, which are
链接地址:https://www.31doc.com/p-3739592.html