BS-EN-1323-2007.pdf
《BS-EN-1323-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-1323-2007.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 1323:2007 Adhesives for tiles Concrete slabs for tests The European Standard EN 1323:2007 has the status of a British Standard ICS 83.180; 91.100.10; 91.100.30 ? Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 02:18:04 GMT+00:00 2008, Unco
2、ntrolled Copy, (c) BSI BS EN 1323:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2007 BSI 2007 ISBN 978 0 580 57394 1 National foreword This British Standard is the UK implementation of EN 1323:2007. It supersedes BS EN 1323
3、:1999 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/539, Ceramic tiles and other rigid tiling. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the
4、necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University
5、, Wed Jan 02 02:18:04 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1323 August 2007 ICS 83.180; 91.100.10; 91.100.30Supersedes EN 1323:1996 English Version Adhesives for tiles - Concrete slabs for tests Colles carrelage - Plaques de bton pour essais
6、Mrtel und Klebstoffe fr Fliesen und Platten - Betonplatten fr Prfungen This European Standard was approved by CEN on 21 January 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national st
7、andard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any oth
8、er language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia
9、, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPIS
10、CHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1323:2007: E Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 0
11、2:18:04 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EN 1323:2007 (E) 2 Contents Page Foreword.3 1 Scope .4 2 Normative references.4 3 Test conditions .4 4 Apparatus 4 4.1 Pull-head plates 4 4.2 Tensile testing machine.4 4.3 Carsten-Rhrchen flask .4 5 Concrete slab4 5.1 Specification4 5.2 Manufacture
12、of the concrete slab .5 5.3 Conditioning of the concrete slab.5 5.4 Water absorption at the surface5 6 Test report.6 Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 02:18:04 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EN 1323:2007 (E) 3 Foreword This document (EN
13、 1323:2007) has been prepared by Technical Committee CEN/TC 67 “Ceramic tiles”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2008, and conflict
14、ing national standards shall be withdrawn at the latest by February 2008. This document supersedes EN 1323:1996. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgari
15、a, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: London South Bank U
16、niversity, London South Bank University, Wed Jan 02 02:18:04 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EN 1323:2007 (E) 4 1 Scope This European Standard specifies the substrate (concrete slab) to be used for the determination of the properties of adhesives for tiles. This European Standard does not
17、 contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can also be used for other types of tiles (natural and agglomerated stones etc), if they do not adversely affect the stones. 2 Normative references The following referen
18、ced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 197-1, Cement Part 1: Composition, specifications and conformity cr
19、iteria for common cements 3 Test conditions The standard conditions shall be (23 2) C and (50 5) % relative humidity and the air speed in the working area less than 0,2 m/s. 4 Apparatus 4.1 Pull-head plates Square metallic (e.g. steel, aluminium) plates, with dimensions of (50 1) mm x (50 1) mm and
20、a minimum thickness of 10 mm with a suitable fitting for connection to the tensile testing machine. 4.2 Tensile testing machine A tensile testing machine for direct pull tensile force test and with suitable capacity and sensivity for the test. The machine shall be capable of applying the load to the
21、 pull-head plate at the rate of (250 50) N/s, through a suitable fitting that does not exert any bending force. 4.3 Carsten-Rhrchen flask Carsten-Rhrchen flask or other suitable apparatus for measuring the water absorption at the surface of the concrete slab (see Figure 1). 5 Concrete slab 5.1 Speci
22、fication The concrete slab shall be at least 35 mm thick, have a moisture content of less than 3 % by mass (carbide method) and have a water absorption at the surface after 4 h in the range of 0,5 cm3 to 1,5 cm3 measured by the method described in 5.4. Licensed Copy: London South Bank University, Lo
23、ndon South Bank University, Wed Jan 02 02:18:04 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EN 1323:2007 (E) 5 The tensile adhesion strength shall be at least 1,5 N/mm2. The tensile adhesion strength shall be determined by bonding at least five pull head plates (see 4.1) directly to the slab, e.g. wi
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 1323 2007
链接地址:https://www.31doc.com/p-3739598.html