BS-EN-13698-2-2003.pdf
《BS-EN-13698-2-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13698-2-2003.pdf(26页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13698-2:2003 Pallet production specification Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets The European Standard EN 13698-2:2003 has the status of a British Standard ICS 55.180.20 ? BS EN 13698-2:2003 This British Standard, was published under th
2、e authority of the Standards Policy and Strategy Committee on 9 July 2003 BSI 9 July 2003 ISBN 0 580 42237 2 National foreword This British Standard is the official English language version of EN 13698-2:2003. The UK participation in its preparation was entrusted by Technical Committee PKW/5, Primar
3、y and transport packaging, to Subcommittee PKW/5/34, Pallets, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred
4、to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions
5、 of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or p
6、roposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 23 and a back cover. The BSI copyright date dis
7、played in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13698-2 July 2003 ICS 55.180.20 English version Pallet production specification - Part 2: Construction specification for
8、 1000 mm x 1200 mm flat wooden pallets Spcification de produit pour les palettes - Partie 2: Spcification de fabrication des palettes plates en bois, de dimension 1000 mm x 1200 mm Produktspezifikation fr Paletten - Teil 2: Hestellung von 1000 mm x 1200 mm Flachpaletten aus Holz This European Standa
9、rd was approved by CEN on 10 April 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning suc
10、h national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language an
11、d notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia
12、, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN nati
13、onal Members. Ref. No. EN 13698-2:2003 E EN 13698-2:2003 (E) 2 Contents page Foreword3 Introduction.4 1Scope 5 2Normative references 5 3Terms and definitions5 4Pallet types.6 5Nominal and safe working loads6 6Construction.6 7Inspections and marking.12 Annex A (normative) Materials.13 Annex B (inform
14、ative) Wood shrinkage 18 Annex C (normative) Joint separation test.19 Annex D (normative) Preservatives.21 Annex E (informative) Safe working load under different loading conditions22 Bibliography23 EN 13698-2:2003 (E) 3 Foreword This document (EN 13698-2:2003) has been prepared by Technical Committ
15、ee CEN/TC 261 “Packaging“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2004, and conflicting national standards shall be withdrawn at the lat
16、est by January 2004. Annexes A, C and D are normative. Annexes B and E are informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland
17、, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. EN 13698-2:2003 (E) 4 Introduction Tests on the perimeter base pallet and over 30 years of experience with the skid pallet in th
18、rough transit of goods, have demonstrated that these designs of pallet comply with the relevant dimensional requirements and appropriate tests specified in certain standards. This certifies that the quality of the pallet is suitable for normal purposes as regards the physical stresses involved in di
19、stribution and handling. EN 13698-2:2003 (E) 5 1 Scope This European Standard specifies the manufacturing characteristics of flat re-usable wooden 1000 mm 1200 mm, double deck, non-reversible, 4-way entry, 9 block skid and perimeter base pallets suitable for transport, storage, handling or exchange
20、use. It also gives some requirements for manufacture and marking and addresses the issue of safety. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text
21、, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applie
22、s (including amendments). ENV 717-1, Wood-based panels Determination of formaldehyde release Part 1: Formaldehyde emission by the chamber method EN 1087-1, Particleboard Determination of moisture resistance Part 1: Boil test. EN 1310:1997, Round and sawn timber Method of measurement of features EN 1
23、2246:1999, Quality classification of timber used in pallets and packaging. EN 13183-1, Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method EN 13183-2, Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method EN 13382, Flat pall
24、ets for material handling Principal dimensions EN ISO 445:1998, Pallets for materials handling - Vocabulary (ISO 445:1996). prEN ISO 8611-1:2000, Pallets for materials handling - Part 1: Test methods for flat pallets (ISO/DIS 8611-1:2000). ISO 3133, Wood Determination of ultimate strength in static
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13698 2003
链接地址:https://www.31doc.com/p-3739607.html