BS-EN-13200-4-2006.pdf
《BS-EN-13200-4-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13200-4-2006.pdf(28页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13200-4:2006 Spectator facilities Part 4: Seats Product characteristics The European Standard EN 13200-4:2006 has the status of a British Standard ICS 91.040.10; 97.200.10; 97.220.10 ? Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:58:
2、18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13200-4:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2006 BSI 2006 ISBN 0 580 49749 6 National foreword This British Standard was published by BSI. It is the UK implement
3、ation of EN 13200-4:2006. The UK participation in its preparation was entrusted to Technical Committee B/552, Spectator facilities. A list of organizations represented on B/552 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a
4、 contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:58:18 GMT
5、+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13200-4 October 2006 ICS 91.040.10; 97.200.10; 97.220.10 English Version Spectator facilities - Part 4: Seats - Product characteristics Installations pour spectateurs - Partie 4: Siges - Caractristiques des
6、produits Zuschaueranlagen - Teil 4: Sitze - Produktmerkmale This European Standard was approved by CEN on 28 August 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard witho
7、ut any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language ma
8、de by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany
9、, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Ma
10、nagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13200-4:2006: E Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:58:18 GMT+00:00 2006,
11、 Uncontrolled Copy, (c) BSI EN 13200-4:2006 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .4 4 Abbreviations.5 5 General requirements of construction 5 5.1 Seats .5 5.2 General requirements for fixing elements and fixing methods 6 5.2.1 General6 5.2.2 Criter
12、ia for presentation of designs.7 5.2.3 Acceptance testing7 6 Sampling and conditioning.7 6.1 Sampling.7 6.2 Conditioning.7 7 Characteristics of materials7 7.1 General7 7.2 Corrosion resistance.7 7.3 Resistance to weathering agents/stability to light.8 7.4 Temperature resistance 8 8 Strength and dura
13、bility requirements8 9 Test report10 10 Seating numbers11 11 Instruction for use .11 12 Marking.11 Annex A (informative) Temperature resistance .12 A.1 Temperature resistance 12 A.1.1 General12 A.1.2 Low temperature test 12 A.1.3 High temperature test12 Annex B (informative) Examples of seats.13 Ann
14、ex C (informative) Ergonomy 15 C.1 Ergonomy.15 C.1.1 Anthropometric aspects and data15 C.1.2 Design requirements.15 Bibliography24 Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04:58:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13200-4:2006 (E) 3 Foreword
15、This document (EN 13200-4:2006) has been prepared by Technical Committee CEN/TC 315 “Spectators facilities”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest b
16、y April 2007, and conflicting national standards shall be withdrawn at the latest by April 2007. EN 13200 Spectator facilities consists of the following parts: Part 1: Layout criteria for spectator viewing area Specification Part 3: Separating elements Requirements Part 4: Seats-product characterist
17、ics Part 5: Telescopic stands Part 6: Demountable (temporary) stands According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland,
18、France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: London South Bank University, London South Bank University, Sun Dec 24 04
19、:58:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13200-4:2006 (E) 4 1 Scope This European Standard specifies the mechanical, physical and chemical product characteristics of fixed seating used in sports venues (indoor and outdoor) in the spectator viewing area (S.V.A.). It also specifies the cri
20、teria for fixing the seating to the structure. These characteristics and criteria are determined in order to assure an adequate resistance to static and dynamic stresses and to atmospheric agents. This European Standard specifies comfort, functionality and safety requirements to prevent serious inju
21、ry through normal functional use, as well as misuse that might reasonably be excepted to occur. This European Standard does not include any fire behaviour or resistance requirements. 2 Normative references The following referenced documents are indispensable for the application of this document. For
22、 dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12727, Furniture Ranked seating Test methods and requirements for strength and durability EN 13200-1, Spectator facilities Part 1: Layout cr
23、iteria for spectator viewing area Specification ENV 581-2:2000, Outdoor furniture Seating and tables for camping, domestic and contract use Part 2: Mechanical safety requirements and test methods for sampling EN ISO 527-2, Plastics Determination of tensile properties Part 2: Test conditions for moul
24、ding and extrusion plastics (ISO 527-2:1993 including Corr. 1:1994) EN ISO 4892-2, Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps (ISO 4892-2:2006) ISO 105-A02, Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour ISO 179-1:2000, Pl
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13200 2006
链接地址:https://www.31doc.com/p-3739655.html