《BS-EN-13229-2001.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13229-2001.pdf(102页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD Inset appliances including open fires fired by solid fuels Requirements and test methods The European Standard EN 13229:2001, with the incorporation of amendments A1:2003 and A2:2004 has the status of a British Standard ICS 97.100.30 ? BS EN 13229:2001 Incorporating Amendments Nos.
2、1 and 2 and Corrigendum No. 1 BS EN 13229:2001 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee and comes into effect on 5 September 2001 BSI 2006
3、ISBN 0 580 38175 7 National foreword This British Standard is the official English language version of EN 13229:2001, including amendments A1:2003 and A2:2004, and corrigenda September 2003 and June 2006. The start and finish of text introduced or altered by amendment is indicated in the text by tag
4、s !“. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. CEN/TC 295 has agreed that the withdrawal date of conflicting national standards is the date of availability plus 18 months. Conflicting national standar
5、ds will need either to be withdrawn or amended by 31 December 2002 and these are under consideration in Technical Committee RHE/28. The UK participation in its preparation was entrusted to Technical Committee RHE/28, Domestic solid mineral fuel appliances, which has the responsibility to: A list of
6、organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Co
7、rrespondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does n
8、ot of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promu
9、lgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 98, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publica
10、tion Amd. No. DateComments 1475017 November 2003See national foreword 1549319 January 2005See national foreword 16546 Corrigendum No. 1 31 October 2006Replacement of formula (18) in A.6.2.7.1, Correction to A.6.2.1.1, A.6.2.9 and EN foreword, amendment A2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE
11、 NORM EN 13229 June 2001 +A1 April 2003 +A2 September 2004 English version Inset appliances including open fires fired by solid fuels Requirements and test methods (includes amendments A1:2003 and A2:2004) Foyers ouverts et inserts combustibles solides Exigences et mthodes dessai Kamineinstze einsch
12、lielich offene Kamine fr feste Brennstoffe Anforderungen und Prfung This European Standard was approved by CEN on 7 April 2001; amendment A1 was approved by CEN on 6 December 2002 and amendment A2 was approved by CEN on 18 June 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regu
13、lations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This Eur
14、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the natio
15、nal standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EURO
16、PEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. ICS 97.100.30 Incorporating Corrigendu
17、m June 2006 Ref. No. EN 13229:2001 E Page 2 EN 13229:2001 CONTENTS page Foreword.3 1 Scope4 2 Normative references5 3 Terms and definitions.6 4 Materials, design and construction .15 5 Safety24 6 Performance26 7 Appliance instructions31 8 Marking34 9 Evaluation of conformity35 Annex A (normative) Te
18、st methods43 Annex B (normative) Test fuels and recommended fuels.86 Annex C (informative) Deleted Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.92 Bibliography.98 Tables Table 1 - Categorisation of appliances4 Table 2 -
19、Steel material types .20 Table 3 - Steel Nominal minimum wall thicknesses21 Table 4 - Cast Iron - Minimum wall thicknesses22 Table 5 - Minimum mechanical requirements for cast iron22 Table 6 - Minimum thread size designation of flow and return tappings .23 Table 7 - Minimum depth of tapping or lengt
20、h of thread23 Table 8 - Deleted Table 9 - Deleted Table 10 - Minimum refuelling intervals at nominal heat output.29 Table 11 - Minimum refuelling intervals or burning rate at slow or reduced combustion30 Table 12 - Characteristics to take account of in deciding family of appliances38 Table 13 - Perf
21、ormance characteristics to take account of in deciding family of appliances39 Table A.1 - Uncertainty of measurement47 Table A.2 - Notations and units used in calculations66 Table B.1 - Test fuel specifications89 Table B.2 - Typical commercial fuel specifications .90 Table ZA.1 - Relevant clauses fo
22、r Inset appliances93 Table ZA.2 - System of attestation of conformity94 Table ZA.3 - Assignment of evaluation of conformity tasks for Space heating in residential buildings with possible supply of hot water under system 3 94 Figures Figure 1 - Flue draught values27 Figure A.1 - Example of installati
23、on of an appliance with vertical flue outlet in the test assembly.71 Figure A.2 - Example of installation of an appliance with horizontal flue outlet in the test assembly.72 Figure A.3 - View of trihedron showing general arrangement of side walls and test hearth73 Figure A.4 Details of filler pieces
24、 for trihedron rear wall74 Figure A.5 - Cross section showing trihedron construction75 Figure A.6 - Plan view of trihedron hearth and walls showing position of measurement points76 Figure A.7 - Details of thermocouples in trihedron wall77 Figure A.8 - Construction and general arrangement of measurem
25、ent section78 Figure A.9 - Details and dimensions of measurement section for vertical flue outlet79 Figure A.10 - Details and dimensions of measurement section for horizontal flue outlet80 Figure A.11 - Example of test installation for appliances with water circuit81 Figure A.12 - Dimensions of meas
26、urement section for natural draught safety test 82 Figure A.13 - Test assembly of Kachelfen or Putzfen inset appliances for heating tests83 Figure A.14 - Test surround for Kachelfen or Putzfen inset appliances.84 Figure A.15 - Example of installation with trihedron test wall and ceiling85 Figure B.1
27、 - Flow chart showing selection process for tests on recommended fuels87 Figure ZA.1 - Example CE marking information.97 Page 3 EN 13229:2001 Foreword This European Standard has been prepared by Technical Committee CEN/TC 295 “Residential solid fuel burning appliances“, the secretariat of which is h
28、eld by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2001, and conflicting national standards shall be withdrawn at the latest by December 2002. According to the CEN/CENELEC Intern
29、al Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland a
30、nd the United Kingdom. This document (EN 13229:2001/A1:2003) has been prepared by Technical Committee CEN/TC 295 “Residential solid fuel burning appliances“, the secretariat of which is held by BSI. This Amendment to the European Standard EN 13229:2001 shall be given the status of a national standar
31、d, either by publication of an identical text or by endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at the latest by September 2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries
32、are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. This document (EN 13229:2001/A2
33、:2004) has been prepared by Technical Committee CEN/TC 295 “Residential solid fuel burning appliances”, the secretariat of which is held by BSI. This Amendment to the European Standard EN 13229:2001 shall be given the status of a national standard, either by publication of an identical text or by en
34、dorsement, at the latest by February 2005, and This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directives. For relationship with EU Directives, see informative Annex ZA, which i
35、s an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary
36、, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Foreword to amendment A1 Foreword to amendment A2 conflicting national standards shall be withdrawn at the latest by July 2007. P
37、age 4 EN 13229:2001 1 Scope This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission), instructions and marking together with associated test methods for type testing, residential open fires and inset appliances
38、fired by solid fuel. This standard is applicable to hand fired appliances which are listed under categories 1b, 1c, 2b, 2c, 3a, 3b and 3c of Table 1. The surround of the appliances is integrated with the building with the exception of free-standing appliances and inset appliances which are installed
39、 into a fireplace recess or enclosure. !This standard also covers Kachelfen and Putzfen inset appliances, having nominal heat outputs up to 15 kW in accordance with category lc of table 1.“ This standard is not applicable to appliances with fan assisted combustion air. These appliances provide heat
40、into the space where they are installed. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. They may burn either solid mineral fuels, peat briquettes, natural or manufactured wood logs or be multi-fuel in accordance with the appliance manufacturers
41、 instructions. Open fireplace components such as a bottomgrate with associated firefront which the manufacturer supplies for installation into an existing heat resistant, insulated firebox are not covered by this standard. Table 1 - Categorisation of appliances a) b) c) Freestanding or inset applian
42、ces without functional modification Freestanding or inset appliances which have functional modification Inset appliances for fireplace recess and enclosure 1 appliances operating with firedoors closed EN 13240 EN 13229 EN 13229 2 appliances operating with firedoors closed or open EN 13240 EN 13229 E
43、N 13229 3 open fires without firedoors EN 13229 EN 13229 EN 13229 NOTE Without functional modification means a modification of the surround of an appliance, that only changes the transmission of heat, without effect on combustion. Page 5 EN 13229:2001 2 Normative references This European Standard in
44、corporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this E
45、uropean Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication applies (including amendments). !DIN 51060:1975 Refractory ceramic products and construction materials Terms and definitions“ EN 1561:1997 Founding - Grey cast irons E
46、N 1563:1997 Founding - Spheroidal graphite cast irons EN 10025:1993 Hot rolled products of non-alloy structural steels - Technical delivery conditions EN 10027-2 :1992 Designation systems for steels - Part 2 : Numerical system EN 10028-2:1992 Flat products made of steels for pressure purposes - Part
47、 2: Non-alloy and alloy steels with specified elevated temperature properties EN 10029:1991 Hot rolled steel plates 3 mm thick or above - Tolerances on dimensions, shape and mass EN 10088-2:1995 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip for general purposes E
48、N 10111:1998 Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions EN 10120:1996 Steel sheet and strip for welded gas cylinders #EN 50165 Electrical equipment of non-electric appliances for household and similar purposes Safety requirements$ ISO 7-
49、1: 1994 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation ISO 7-2: 2000 Pipe threads where pressure-tight joints are made on the threads - Part 2: Verification by means of limit gauges ISO 228-1: 2000 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimension, tolerances and designation ISO 228-2: 1987 Pipe threads where pressure-tight joints are not made on the threads - Part 2: V
链接地址:https://www.31doc.com/p-3739667.html