BS-EN-13241-1-2003.pdf
《BS-EN-13241-1-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13241-1-2003.pdf(32页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13241-1:2003 Incorporating Corrigendum No. 1 Industrial, commercial and garage doors and gates Product standard Part 1: Products without fire resistance or smoke control characteristics The European Standard EN 13241-1:2003 has the status of a British Standard ICS 91.090 ? BS
2、EN 13241-1:2003 This British Standard, was published under the authority of the Standards Policy and Strategy Committee on 30 July 2003 BSI 12 September 2003 ISBN 0 580 42359 X National foreword This British Standard is the official English language version of EN 13241-1:2003, including Corrigendum
3、July 2003. The UK participation in its preparation was entrusted by Technical Committee B/538, Doors, windows, shutters, hardware and curtain walling, to Subcommittee B/538/6, Industrial commercial and garage doors and gates, which has the responsibility to: A list of organizations represented on th
4、is subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by u
5、sing the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity
6、 from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in
7、the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 28, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No
8、. DateComments 14656 Incorporating corrigendum No. 1 12 September 2003Correction to 4.3.7 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13241-1 July 2003 ICS 91.09 incorporating corrigendum July 2003 English version Industrial, commercial and garage doors and gates - Product standard - Part 1
9、: Products without fire resistance or smoke control characteristics Portes et barrires industrielles, commerciales et de garage - Norme de produit - Partie 1: Produits sans caractristiques coupe-feu, ni pare-fume Tore - Produktnorm - Teil 1: Produkte ohne Feuer- und Rauchschutzeigenschaften This Eur
10、opean Standard was approved by CEN on 12 June 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references con
11、cerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own
12、language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portuga
13、l, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reserved worldwide f
14、or CEN national Members. Ref. No. EN 13241-1:2003 E EN 13241-1:2003 (E) 2 Contents page Foreword4 Introduction.5 1Scope 6 1.1General6 1.2Exclusions6 1.3Specific applications .7 2Normative references 7 3Terms and definitions8 4Requirements.8 4.1Mechanical aspects .9 4.1.1Force for manual operation 9
15、4.1.2Mechanical resistance.9 4.1.3Mechanical durability 9 4.1.4Geometry of glazing/glass components9 4.1.5Protection against cutting.9 4.1.6Protection against tripping.10 4.1.7Safe openings.10 4.1.8Release of dangerous substances.10 4.2Power operation.10 4.2.1Protection against crushing, shearing an
16、d drawing-in .10 4.2.2Operating forces 10 4.2.3Electrical safety11 4.2.4Electromagnetic compatibility (EMC)11 4.2.5Alternative requirements.12 4.2.6Upgrading of manually operated doors.12 4.3Additional requirements for specific performance characteristics12 4.3.1Water tightness12 4.3.2Resistance to
17、wind load13 4.3.3Noise .13 4.3.4Thermal resistance 13 4.3.5Air permeability13 4.3.6Durability of the performance characteristics14 4.4Instructions for installation, operation and maintenance .14 5Marking and labelling 14 6Evaluation of conformity.14 6.1General14 6.2Initial type test15 6.3Test on sit
18、e.15 6.4Production control.15 Annex A (informative) Form for designation and classification of performances .17 Annex B (normative) Procedure for the determination of values for thermal resistance18 B.1Introduction18 B.2Procedure .18 Annex C (informative) Safety factors to be considered in door desi
19、gn in respect of their resistance to wind load.20 Annex ZA (informative) Relationship of this European Standard with the Construction Products Directive21 EN 13241-1:2003 (E) 3 ZA.1Clauses of this European Standard addressing the provisions of EU Construction Products Directive21 ZA.2Procedures for
20、the attestation of conformity of industrial, commercial and garage doors and gates22 ZA.2.1 General22 ZA.2.2 Procedure according to system 322 ZA.3CE-marking and labelling23 Annex ZB (informative) Relationship of this European Standard with the Machinery Directive26 Annex ZC (informative) Relationsh
21、ip of this European Standard with the EMC Directive27 Bibliography28 EN 13241-1:2003 (E) 4 Foreword This document (EN 13241-1:2003) has been prepared by Technical Committee CEN /TC 33, “Doors, windows, shutters, building hardware and curtain walling“, the secretariat of which is held by AFNOR. This
22、European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2004, and conflicting national standards shall be withdrawn at the latest by January 2004. This European Standard is part of a series of product
23、standards for industrial, commercial and garage doors and gates with or without fire resistance or smoke control characteristics (see Bibliography). This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential
24、 requirements of EU Directive(s). For relationship with EU Directive(s), see informative annexes ZA, ZB and ZC, which are integral parts of this document. Annexes A and C are informative. Annex B is normative. This document includes a Bibliography. No existing European Standard is superseded. Accord
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13241 2003
链接地址:https://www.31doc.com/p-3739668.html