《BS-EN-13490-2001-A1-2008.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13490-2001-A1-2008.pdf(26页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13490:2001 Mechanical vibration Industrial trucks Laboratory evaluation and specification of operator seat vibration ICS 53.060; 13.160 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW +A1:2008 Licensed CopyChinese University of Hong Kong, 13/06/2009 05:1
2、7, Uncontrolled Copy, (c) BSI BS EN 13490:200 15 January 2002 National foreword A Amd. No. DateComments +A1:2008 This British Standard is the UK implementation of EN 13490:2001+A1:2008. It supersedes BS EN 13490:200 which is withdrawn. The start and finish of text introduced or altered by amendment
3、is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by ab. The UK participation in its preparation was entrusted by Technical Committee GME/21, Mechanical vibration, shock and conditio
4、n monitoring, to Subcommittee GME/21/6, Human exposure to mechanical vibration and shock. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all necessary provisions of a contract. Users are responsible f
5、or its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Date Comments ISBN 978 0 580 61499 6 BSI 2009 1 1 the This British Standard was published under the authority of the Standards Policy and Strategy Committee on Implementation of CEN amendmen
6、t A1:2008, and alignment of BS and CEN publication dates mendments/corrigenda issued since publication I 30 April 2009 Licensed CopyChinese University of Hong Kong, 13/06/2009 05:17, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13490:2001+A1 November 2008 ICS 13.16
7、0; 53.060 Supersedes EN 13490:2001 English Version Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration Vibrations mcaniques - Chariots industriels - Evaluation en laboratoire et spcification des vibrations transmises loprateur par le sige Mec
8、hanische Schwingungen - Flurfrderzeuge - Laborverfahren zur Bewertung sowie Spezifikation der Schwingungen des Maschinenfhrersitzes This European Standard was approved by CEN on 20 August 2001 and includes Amendment 1 approved by CEN on 5 October 2008. CEN members are bound to comply with the CEN/CE
9、NELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to a
10、ny CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions
11、. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain
12、, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national M
13、embers. Ref. No. EN 13490:2001+A1:2008: E Licensed CopyChinese University of Hong Kong, 13/06/2009 05:17, Uncontrolled Copy, (c) BSI EN 13490:2001+A1:2008 (E) 2 Foreword This document (EN 13490:2001+A1:2008) has been prepared by Technical Committee CEN/TC 231 “Mechanical vibration and shock“, the se
14、cretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document inc
15、ludes Amendment 1, approved by CEN on 2008-10-05. This document supersedes EN 13490:2001. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Fre
16、e Trade Association, and supports essential requirements of EC Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
17、 countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia
18、, Spain, Sweden, Switzerland and United Kingdom. BS EN 13490:2001+A1:2008 Licensed CopyChinese University of Hong Kong, 13/06/2009 05:17, Uncontrolled Copy, (c) BSI EN 13490:2001+A1:2008 (E) 3 Introduction The operators of industrial trucks are often exposed to a low-frequency vibration environment
19、mainly caused by the movement of the vehicles over uneven ground. The seat constitutes the last stage of suspension before the driver. To be efficient at attenuating the vibration, the suspension seat should be chosen according to the dynamic characteristics of the vehicle. The performance criteria
20、provided in this European Standard have been set in accordance with what is attainable using what is at present the best design practice. They do not necessarily ensure the complete protection of the operator against effects of vibration and shock. They may be revised in the light of future developm
21、ents and improvements in suspension design. Performance criteria obtained in accordance with this European Standard may be useful to manufacturers of industrial trucks when selecting seats for possible use in their products. However, to satisfy fully the requirements of the !EU“ Machinery Directive
22、it is important for suppliers of mobile machinery to demonstrate that the seat supplied reduces the vibration in the specified machine to the lowest level that can be reasonably achieved. The test inputs included in this European Standard are based on a very large number of measurements taken in sit
23、u on industrial trucks while they were used under severe but typical operating conditions. The test method is based on EN 30326-1, which is a general method applicable to seats for different types of vehicles. 1 Scope 1.1 This European Standard is applicable to operator seats used on industrial truc
24、ks as defined in ISO 5053:1987 irrespective of power supply, type of equipment, lifting mechanism and tyres. It also applies to seats for other trucks not covered by ISO 5053:1987, e.g. variable-reach trucks and lowlift order picking trucks. 1.2 This European Standard specifies, in accordance with E
25、N 30326-1, a laboratory method for measuring and evaluating the effectiveness of the seat suspension in reducing the vertical wholebody vibration transmitted to the operator of industrial trucks at frequencies between 1 Hz and 20 Hz. 1.3 This European Standard defines the input spectral classes requ
26、ired for the following industrial trucks. Each class defines a group of machines having similar vibration characteristics: Platform trucks, trucks rider-controlled, etc. with wheel mean diameter below 200 mm and highload non- rubber solid tyres (category 1)1) Reach trucks, articulated trucks, etc. w
27、ith wheel mean diameter below 450 mm and high-load non-rubber solid tyres or cylindrical/conical base rubber solid tyres (category 2)1) Straddle trucks, trucks with wheel mean diameter below 645 mm and rubber solid or pneumatic tyres (category 3)1) Straddle trucks, trucks with wheel mean diameter be
28、tween 645 mm and 900 mm and rubber solid or pneumatic tyres (category 4a)1) Straddle trucks, trucks with wheel mean diameter between 900 mm and 1 200 mm and rubber solid or pneumatic tyres (category 4b)1) Trucks with wheel mean diameter between 1 200 mm and 2 000 mm and rubber solid or pneumatic tyr
29、es (category 5)1) BS EN 13490:2001+A1:2008 Licensed CopyChinese University of Hong Kong, 13/06/2009 05:17, Uncontrolled Copy, (c) BSI EN 13490:2001+A1:2008 (E) 4 All-terrain trucks (category 6)1) 1.4 This European Standard specifies performance criteria to be achieved by seats intended for each of t
30、he above-mentioned groups of machines. 1.5 The tests and criteria defined in this European Standard are intended for operator seats used in industrial trucks of conventional design. NOTE Other tests may be appropriate for machines with design features that result in significantly different vibration
31、 characteristics. 1.6 This European Standard is only concerned with the vertical component of whole-body vibration. Vibration which reaches the operator other than through his seat, for example that sensed by his feet on the platform or control pedals or by his hands on the steering-wheel, is not co
32、vered. 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.“ !deleted text“ EN
33、 30326-1:1994, Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements (ISO 10326-1:1992) !EN ISO 8041, Human response to vibration Measuring instrumentation (ISO 8041:2005)“ EN ISO 13090-1, Mechanical vibration and shock Guidance on safety aspects of
34、tests and experiments with people Part 1: Exposure to whole-body mechanical vibration and repeated shock (ISO 13090-1:1998) ISO 2631-1:1997, Mechanical vibration and shock Evaluation of human exposure to whole-body vibration Part 1: General requirements ISO 5053:1987, Powered industrial trucks Termi
35、nology ISO 5805:1997, Mechanical vibration and shock Human exposure Vocabulary !deleted text“ 3 Terms and definitions, symbols and abbreviations 3.1 Terms and definitions For the purposes of this European Standard, the terms and definitions given in ISO 5805:1997 and the following apply. 3.1.1 whole
36、-body vibration vibration transmitted to the body as a whole through the buttocks of a seated operator 1) See !EN 13059“. BS EN 13490:2001+A1:2008 Licensed CopyChinese University of Hong Kong, 13/06/2009 05:17, Uncontrolled Copy, (c) BSI EN 13490:2001+A1:2008 (E) 5 3.1.2 input spectral class machine
37、s having similar ride vibration characteristics at the seat attachment point, grouped by virtue of various mechanical characteristics 3.1.3 operator seat that portion of the machine provided for the purpose of supporting the buttocks and back of the seated operator, including any suspension system a
38、nd other mechanisms provided (for example, for adjusting the seat position) 3.1.4 frequency analysis process of arriving at a quantitative description of a vibration amplitude as a function of frequency 3.1.5 measuring period time duration in which vibration data for analysis is obtained 3.2 Symbols
39、 and abbreviations For the purposes of this European Standard, the following symbols and abbreviations apply: aP(fr) unweighted r.m.s. value of the measured vertical acceleration at the platform at the resonance frequency a*P12, a*P34 unweighted r.m.s. value of the target vertical acceleration at th
40、e platform under the seat (see Figure 1) between frequencies f1 and f2, or f3 and f4 aP12, aP34 unweighted r.m.s. value of the measured vertical acceleration at the platform between frequencies f1 and f2, or f3 and f4 aS(fr) unweighted r.m.s. value of the measured vertical acceleration at the seat d
41、isc at the resonance frequency a*wP12, a*wP34 weighted r.m.s. value of the target vertical acceleration at the platform between frequencies f1 and f2, or f3 and f4 awP12 weighted r.m.s. value of the measured vertical acceleration at the platform between frequencies f1 and f2 awS12 weighted r.m.s. va
42、lue of the measured vertical acceleration at the seat disc (see Figure 1) between frequencies f1 and f2 Be resolution bandwidth, Hz EM Earth-moving Machinery f frequency, Hz fr frequency at resonance GP(f) measured PSD of the vertical vibration at the platform (seat base) G*P (f) target PSD of the v
43、ertical vibration at the platform (seat base) G*PL (f) lower limit for the measured PSD of the vertical vibration at the platform (seat base) BS EN 13490:2001+A1:2008 Licensed CopyChinese University of Hong Kong, 13/06/2009 05:17, Uncontrolled Copy, (c) BSI EN 13490:2001+A1:2008 (E) 6 G*PU (f) upper
44、 limit for the measured PSD of the vertical vibration at the platform (seat base) H(fr) transmissibility at resonance HP high-pass filter IT Industrial Truck LP Low-pass filter PSD Power spectral density expressed as acceleration squared per unit bandwidth, (m/s2)2/Hz r.m.s. root mean square SEAT Se
45、at Effective Amplitude Transmissibility factor Ts sampling time, s. BS EN 13490:2001+A1:2008 Licensed CopyChinese University of Hong Kong, 13/06/2009 05:17, Uncontrolled Copy, (c) BSI EN 13490:2001+A1:2008 (E) 7 Key 1 Seat backrest 2 Seat pan 3 Accelerometer disc on the seat pan (S) 4 Seat suspensio
46、n 5 Platform 6 Accelerometer on the platform (P) 7 Base of the seat Provision shall be made for adjustment of the angles of the knees, the ankles and the backrest (if possible) (see 5.2). Figure 1 Posture of the test person BS EN 13490:2001+A1:2008 Licensed CopyChinese University of Hong Kong, 13/06
47、/2009 05:17, Uncontrolled Copy, (c) BSI EN 13490:2001+A1:2008 (E) 8 4 General 4.1 The laboratory simulated machine vertical vibration, specified as input spectral class, is based on representative measured data from machines in severe but typical working conditions. The input spectral class is a rep
48、resentative envelope for the machines within the class, therefore the laboratory test is more severe than the typical vibration environment of any specific machine. 4.2 Two criteria are used for the evaluation of seat: a) the Seat Effective Amplitude Transmissibility (SEAT) factor according to EN 30
49、326-1:1994, 9.1, but with frequency weighting according to ISO 2631-1, b) the maximum transmission ratio in the damping test according to EN 30326-1:1994, 9.2. 4.3 The measuring equipment shall be in accordance with !EN ISO 8041“ and EN 30326-1:1994, Clauses 4 and 5. The frequency weighting shall include the effects of the band limiting filters, and be in accordance with ISO 2631-1 (see !EN ISO 8041“). 4.4 Safety precautions shall be in accordance with EN ISO 13090-1. Any compliant end-stops or devices normally fitt
链接地址:https://www.31doc.com/p-3739690.html