BS-EN-13915-2007.pdf
《BS-EN-13915-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13915-2007.pdf(34页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13915:2007 Prefabricated gypsum plasterboard panels with a cellular paperboard core Definitions, requirements and test methods The European Standard EN 13915:2007 has the status of a British Standard ICS 91.100.10 ? Licensed Copy: London South Bank University, London South Ban
2、k University, Wed Jan 02 02:20:58 GMT+00:00 2008, Uncontrolled Copy, (c) BSI BS EN 13915:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2007 BSI 2007 ISBN 978 0 580 58196 0 National foreword This British Standard is the UK i
3、mplementation of EN 13915:2007. The UK participation in its preparation was entrusted by Technical Committee B/544, Plastering, rendering, dry lining, to Subcommittee B/544/2, Gypsum based boards and ancillaries. A list of organizations represented on this committee can be obtained on request to its
4、 secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed
5、 Copy: London South Bank University, London South Bank University, Wed Jan 02 02:20:58 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13915 September 2007 ICS 91.100.10 English Version Prefabricated gypsum plasterboard panels with a cellular paperboar
6、d core - Definitions, requirements and test methods Panneaux de cloison prfabriqus en plaques de pltre me cellulaire en carton - Dfinitions, prescriptions et mthodes dessai Gipsplatten-Wandbaufertigtafeln mit einem Kartonwabenkern - Begriffe, Anforderungen und Prfverfahren This European Standard was
7、 approved by CEN on 9 August 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nati
8、onal standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and
9、notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg
10、, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights o
11、f exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13915:2007: E Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 02:20:58 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EN 13915:2007 (E) 2 Contents Page Foreword3 Int
12、roduction.4 1 Scope 6 2 Normative references6 3 Terms and definitions .7 4 Requirements.7 5 Test methods9 6 Evaluation of conformity.17 7 Designation of the prefabricated gypsum plasterboard panels .19 8 Marking, labelling and packaging20 Annex A (informative) Sampling procedure for testing.21 Annex
13、 B (normative) Mounting and fixing in the test according to EN 13823 (SBI test) .23 Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives25 Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02
14、02:20:58 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EN 13915:2007 (E) 3 Foreword This document (EN 13915:2007) has been prepared by Technical Committee CEN/TC 241 “Gypsum and gypsum based products”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a nati
15、onal standard, either by publication of an identical text or by endorsement, at the latest by March 2008, and conflicting national standards shall be withdrawn at the latest by June 2009. This European standard includes: informative Annex A concerning sampling procedure for testing; normative Annex
16、B concerning SBI mounting and fixing for prefabricated panels made of plasterboard facings and a cellular paperboard core. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identi
17、fying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greec
18、e, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 02:20:58 GMT+00:00 2
19、008, Uncontrolled Copy, (c) BSI EN 13915:2007 (E) 4 Introduction Figure 1 and Figure 2 show the relationship between this standard and the package of standards prepared to support the families of gypsum and ancillary products. Figure 1 Family of gypsum products Licensed Copy: London South Bank Unive
20、rsity, London South Bank University, Wed Jan 02 02:20:58 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EN 13915:2007 (E) 5 Figure 2 Family of ancillary products Licensed Copy: London South Bank University, London South Bank University, Wed Jan 02 02:20:58 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EN 1
21、3915:2007 (E) 6 1 Scope This European Standard specifies the characteristics and performance of prefabricated panels made of gypsum plasterboard facings complying with EN 520 and a cellular paperboard core intended to be used as a lightweight partition, lining and encasement for general use in build
22、ings. This standard covers the following characteristics: reaction to fire, water vapour permeability, flexural strength (breaking load) and thermal resistance to be measured according to the corresponding European test methods. This Standard covers only prefabricated panels installed so that the co
23、re is not exposed. The following performance characteristics are linked to systems assembled with prefabricated panels made of gypsum plasterboard facings and a cellular paperboard core: shear strength, fire resistance, direct airborne sound insulation, acoustic absorption and air permeability to be
24、 measured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions. This document covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Building In
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13915 2007
链接地址:https://www.31doc.com/p-3739720.html