BS-EN-13341-2005.pdf
《BS-EN-13341-2005.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13341-2005.pdf(36页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13341:2005 Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks Requirements and test methods The European Standard
2、EN 13341:2005 has the status of a British Standard ICS 23.020.10 ? Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:59:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13341:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 26
3、April 2005 BSI 26 April 2005 ISBN 0 580 45832 6 National foreword This British Standard is the official English language version of EN 13341:2005. The UK participation in its preparation was entrusted to Technical Committee PRI/62, Static thermoplastics tanks, which has the responsibility to: A list
4、 of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standard
5、s Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard do
6、es not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European deve
7、lopments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 33 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publicati
8、on Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:59:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13341 March 2005 ICS 23.020.10 English version Thermoplastics static tanks for above ground storage of domestic hea
9、ting oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods Rservoirs statiques en thermoplastiques destins au stockage non enterr de fioul domestique, combustible liquide pour app
10、areil mobile de chauffage/ptrole lampant et gazole - Rservoirs en polythylne mouls par soufflage, en polythylne mouls par rotation et en polyamide 6 par polymrisation anionique - Exigences et mthodes dessai Ortsfeste Tanks aus Thermoplasten fr die oberirdische Lagerung von Heizlen, Kerosin und Diese
11、lkraftstoffen - Tanks, die aus blasgeformtem Polyethylen, rotationsgeformtem Polyethylen und durch anionische Polymerisation von Polyamid 6 hergestellt wurden - Anforderungen und Prfverfahren This European Standard was approved by CEN on 3 February 2005. CEN members are bound to comply with the CEN/
12、CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to a
13、ny CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
14、CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
15、 and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13
16、341:2005: E Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:59:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13341:2005 (E) 2 Contents Page Foreword3 Introduction.4 1 Scope 5 2 Normative references5 3 Terms and definitions .6 4 Requirements.6 5 Evaluation of conformity.8 6 Requirements
17、for tanks.13 7 Durability 16 8 Marking, transport and handling of tanks.16 Annex A (normative) Test methods for determination of material characteristics 18 Annex B (normative) Test methods for determination of tank characteristics.22 Bibliography33 Licensed Copy: sheffieldun sheffieldun, na, Sun Oc
18、t 29 09:59:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13341:2005 (E) 3 Foreword This document (EN 13341:2005) has been prepared by Technical Committee CEN/TC 266 “Thermoplastic static tanks”, the secretariat of which is held by DIN. This European Standard shall be given the status of a nationa
19、l standard, either by publication of an identical text or by endorsement, at the latest by September 2005, and conflicting national standards shall be withdrawn at the latest by December 2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Fr
20、ee Trade Association, and supports essential requirements of EU Directive(s). For relationship with Construction Product Directive (89/106/EEC), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizatio
21、ns of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia
22、, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:59:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13341:2005 (E) 4 Introduction This document has been prepared to provide requirements and test methods for materials, physical properties, an
23、d performance criteria of blow moulded and rotationally moulded static thermoplastics tanks. This document does not include tanks for the transport and distribution of fuels or gasses, or tanks for the storage of gas or for cooling systems. Flammable liquids with a flash point 55 C as determined by
24、EN ISO 2719 are suitable to be stored in the tanks described in this document without further requirements. Flammable liquids with a flash point 55 C as determined by EN ISO 2719 are also suitable to be stored in the tanks described in this document if the requirements concerning electrostatic behav
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13341 2005
链接地址:https://www.31doc.com/p-3739877.html