BS-EN-15614-2007.pdf
《BS-EN-15614-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-15614-2007.pdf(22页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 15614:2007 Protective clothing for firefighters Laboratory test methods and performance requirements for wildland clothing The European Standard EN 15614:2007 has the status of a British Standard ICS 13.340.10 ? BS EN 15614:2007 This British Standard was published under the au
2、thority of the Standards Policy and Strategy Committee on 31 July 2007 BSI 2007 ISBN 978 0 580 57950 9 National foreword This British Standard was published by BSI. It is the UK implementation of EN 15614:2007. The UK participation in its preparation was entrusted by Technical Committee PH/3, Protec
3、tive clothing, to Subcommittee PH/3/2, Clothing for protection against heat and flame. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for
4、 its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15614 June 2007 ICS 13.340.10 English Version Protective clothing for firefighter
5、s - Laboratory test methods and performance requirements for wildland clothing Vtements de protection pour sapeurs-pompiers - Mthodes dessai de laboratoire et exigences de performance pour vtements ports pendant la lutte contre les feux despaces naturels Schutzkleidung fr die Feuerwehr - Laborprfver
6、fahren und Leistungsanforderungen fr Schutzkleidung fr die Brandbekmpfung im freien Gelnde This European Standard was approved by CEN on 10 May 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status
7、of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A ve
8、rsion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic,
9、Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMA
10、LISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15614:2007: E EN 15614:2007 (E) 2 Contents Page Foreword4 Introduction.5 1 Scope 6 2
11、 Normative references6 3 Terms and definitions .6 4 Clothing design9 4.1 General9 4.2 Collar.9 4.3 Coverall or suit.9 4.4 Pockets .9 4.5 Hardware.10 4.6 Sleeves10 4.7 Trousers10 5 Sampling and pre-treatment.10 5.1 Sampling.10 5.2 Number and size of specimen10 5.3 Pre-treatment10 5.3.1 General10 5.3.
12、2 Cleaning10 5.3.3 Ageing.11 5.4 Conditioning.11 5.5 Exposure surface.11 6 Thermal requirements.11 6.1 General11 6.2 Flame spread11 6.2.1 General11 6.2.2 Testing in accordance with EN ISO 15025:2002, Procedure A (Code letter A1) .11 6.2.3 Testing in accordance with EN ISO 15025:2002, Procedure B (Co
13、de letter A2) .12 6.3 Heat transfer (radiation)12 6.4 Heat resistance 12 6.5 Heat resistance of the sewing thread13 7 Mechanical requirements13 7.1 Tensile strength.13 7.2 Tear strength13 7.3 Main seam strength.13 8 Ergonomic and comfort requirements 13 8.1 Thermal resistance13 8.2 Water vapour resi
14、stance.13 9 General requirements14 9.1 Dimensional change after washing and/or dry cleaning.14 9.2 Retroreflective and/or fluorescent performance 14 10 Marking.14 11 Information supplied by the manufacturer .15 Annex A (informative) Uncertainty of measurement .16 EN 15614:2007 (E) 3 Annex ZA (inform
15、ative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC .17 Bibliography18 EN 15614:2007 (E) 4 Foreword This document (EN 15614:2007) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and li
16、fejackets”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2007, and conflicting national standards shall be withdrawn at the latest by December
17、2007. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/686/EEC. For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this do
18、cument. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
19、 Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 15614:2007 (E) 5 Introduction The purpose of this European Standard is to provide minimum performance requirements for protective clothi
20、ng designed for use for extended periods during wildland firefighting and associated activities. Wildland firefighting involves work primarily in summer temperatures, for many hours during which the firefighter may develop high levels of metabolic heat. Consequently the protective clothing should be
21、 light, flexible and commensurate with the risks to which the firefighter may be exposed in order to be effective without introducing heat stress to the wearer. Accordingly a risk assessment should be undertaken to determine if the clothing covered by this European Standard is suitable for its inten
22、ded use and the expected exposure. This European Standard does not cover clothing for use in situations where clothing complying with EN 469 is more suitable, nor does this European Standard cover clothing to protect against chemical, biological or radiation hazards. The risk assessment should inclu
23、de what additional personal protective equipment is necessary for head, hands and feet. In some situations respiratory protection may be required. Firefighters should be trained in the selection, use, care and maintenance of the protective clothing covered by this European Standard, including an und
24、erstanding of its limitation. Nothing in this European Standard is intended to restrict any jurisdiction, purchaser or manufacturer from exceeding the minimum requirements in this standard. A list of standards related to EN 15614 is given in the Bibliography. EN 15614:2007 (E) 6 1 Scope This Europea
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 15614 2007
链接地址:https://www.31doc.com/p-3739898.html