BS-EN-13698-1-2003.pdf
《BS-EN-13698-1-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13698-1-2003.pdf(30页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13698-1:2003 Pallet production specification Part 1: Construction specification for 800 mm x 1200 mm flat wooden pallets The European Standard EN 13698-1:2003 has the status of a British Standard ICS 55.180.20 ? Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 11:13:15 G
2、MT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13698-1:2003 This British Standard, was published under the authority of the Standards Policy and Strategy Committee on 9 July 2003 BSI 9 July 2003 ISBN 0 580 42238 0 National foreword This British Standard is the official English language version of E
3、N 13698-1:2003. The UK participation in its preparation was entrusted by Technical Committee PKW/5, Primary and transport packaging, to Subcommittee PKW/5/34, Pallets, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretar
4、y. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue
5、 or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the t
6、ext; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front c
7、over, an inside front cover, the EN title page, pages 2 to 27 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 11:13:15 GMT
8、+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13698-1 July 2003 ICS 55.180.20 English version Pallet production specification - Part 1: Construction specification for 800 mm x 1200 mm flat wooden pallets Spcification de produit pour les palettes - Parti
9、e 1: Spcification de fabrication des palettes en bois, de dimensions 800 mm x 1200 mm Produktspezifikation fr Paletten - Teil 1: Herstellung von 800 mm x 1200 mm Flachpaletten aus Holz This European Standard was approved by CEN on 10 April 2003. CEN members are bound to comply with the CEN/CENELEC I
10、nternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN memb
11、er. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members a
12、re the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT E
13、UROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13698-1:2003 E Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29
14、 11:13:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13698-1:2003 (E) 2 Contents page Foreword3 Introduction.4 1Scope 5 2Normative references 5 3Terms and definitions5 4Nominal and safe working loads6 5Construction.6 6Inspections and marking.10 Annex A (normative) Materials.11 Annex B (informativ
15、e) Wood shrinkage 17 Annex C (informative) Nail pattern.18 Annex D (normative) Joint separation test.20 Annex E (informative) Inspection (Quality control)22 Annex F (normative) Preservatives.25 Annex G (informative) Safe working loads under different loading situations.26 Bibliography27 Licensed Cop
16、y: sheffieldun sheffieldun, na, Sun Oct 29 11:13:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13698-1:2003 (E) 3 Foreword This document (EN 13698-1:2003) has been prepared by Technical Committee CEN /TC 261 “Packaging“, the secretariat of which is held by AFNOR. This European Standard shall be g
17、iven the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2004, and conflicting national standards shall be withdrawn at the latest by January 2004. Annexes A, D and F are normative. Annexes B, C, E and G are informative. According
18、 to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norw
19、ay, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 11:13:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13698-1:2003 (E) 4 Introduction All general purpose re-usable pallets, irrespective of the material from which they
20、 are made, are required to conform to the dimensional requirements and performance criteria specified in the following standards: EN 13382:2002Flat pallets for materials handling Principal dimensions prEN ISO 8611-1Pallets for materials handling Part 1: Test methods for flat pallets (ISO/DIS 8611-1:
21、2000) prEN ISO/DIS 8611-2Pallets for materials handling - Flat pallets - Part 2: Performance requirements and selection of tests prEN ISO/DIS 8611-3Pallets for materials handling Flat pallets - Part 3: Maximum working load Tests performed by various European railway companies, and over 30 years of e
22、xperience in through transport of goods, have demonstrated that the design of pallet Europallet conforms to the relevant dimensional requirements and appropriate tests specified in the above standards. This certifies that the quality of the pallet is suitable for normal purposes as regards the physi
23、cal stresses involved in distribution and handling. Pallets in full conformity to this specification are therefore exempt from the load testing programs described in the standards relating to performance listed above. This European Standard is largely based upon, but not identical to, UIC-Code 435-2
24、:1994 Standard of quality for a European flat pallet made of wood with four openings and measuring 800 mm 1200 mm. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 11:13:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13698-1:2003 (E) 5 1 Scope This European Standard specifies the manufacturi
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13698 2003
链接地址:https://www.31doc.com/p-3739970.html