BS-EN-13260-2003.pdf
《BS-EN-13260-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13260-2003.pdf(36页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13260:2003 Railway applications Wheelsets and bogies Wheelsets Products requirements The European Standard EN 13260:2003 has the status of a British Standard ICS 45.040 ? BS EN 13260:2003 This British Standard, was published under the authority of the Standards Policy and Stra
2、tegy Committee on 26 June 2003 BSI 26 June 2003 ISBN 0 580 42152 X National foreword This British Standard is the official English language version of EN 13260:2003. The UK participation in its preparation was entrusted by Technical Committee RAE/3, Railway rolling stock material, to Subcommittee RA
3、E/3/-/1, Wheels and wheelsets, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be foun
4、d in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are respo
5、nsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep t
6、he UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 32, an inside back cover and a back cover. The BSI copyright date displayed in
7、 this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13260 June 2003 ICS 45.040 English version Railway applications - Wheelsets and bogies - Wheelsets - Products requirements Applic
8、ations ferroviaires - Essieux monts et bogies - Essieux monts - Prescriptions pour le produit Bahnanwendungen - Radstze und Drehgestelle - Radstze - Produktanforderungen This European Standard was approved by CEN on 13 February 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regu
9、lations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This Eur
10、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the natio
11、nal standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NO
12、RMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13260:2003 E EN 13260:2003 (E) 2 Contents Page Foreword.4 Introduction.5 1 Scope5
13、 2 Normative references.6 3 Product definition.6 3.1 Assembly of components6 3.1.1 General6 3.1.2 Interference between axle wheelseat and wheel hub bore.6 3.1.3 Press-fitting diagram7 3.2 Wheelset characteristics7 3.2.1 Mechanical resistance of the assemblies7 3.2.2 Fatigue characteristics.8 3.2.3 E
14、lectrical resistance.9 3.2.4 Imbalance .9 3.2.5 Dimensions and tolerances .9 3.2.6 Residual stresses.14 3.2.7 Protection against corrosion and impacts14 3.2.8 Marking.14 Annex A (normative) Characteristics of the press-fitting curve 15 Annex B (normative) Fatigue characteristics for a wheelset with
15、an axle of steel grade EA1T or EA4T17 Annex C (informative) Drawing of the test piece for fatigue tests.18 Annex D (informative) Documents for the identification of wheelset components19 Annex E (informative) Product qualification.23 E.1 General23 E.2 Requirements.23 E.2.1 Requirements to be met by
16、the supplier.23 E.2.2 Qualification of personnel23 E.2.3 Requirements to be met by the product23 E.3 Qualification procedure .24 E.3.1 General24 E.3.2 Documentation required 24 E.3.3 Evaluation of the manufacturing installations and processes.24 E.3.4 Laboratory tests.25 E.3.5 Testing of finished pr
17、oducts25 E.4 Qualification certificate25 E.4.1 Condition of validity.25 E.4.2 Modification and extension25 E.4.3 Transference.26 E.4.4 Lapsed certification26 E.4.5 Cancellation26 E.5 Qualification file .26 Annex F (informative) Product delivery27 F.1 General27 F.2 Specific verifications27 F.3 Option
18、al checks28 F.3.1 Dimensional check.28 EN 13260:2003 (E) 3 F.3.2 Ultrasonic examination 28 F.4 Allowable rectifications. 28 F.5 Documents. 29 F.5.1 Shrink-fitting 29 F.5.2 Press-fitting . 29 F.5.3 Components 29 F.6 Quality plan 30 F.6.1 General. 30 F.6.2 Objectives 30 F.6.3 Validity . 30 Annex ZA (i
19、nformative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives. 31 Bibliography. 32 EN 13260:2003 (E) 4 Foreword This document EN 13260:2003 has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is h
20、eld by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2003, and conflicting national standards shall be withdrawn at the latest by December 2003 This document has been prepared un
21、der a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative annex ZA which is an integral part of this document Annexes A and B are normative. Annexes C, D
22、, E and F are informative This document contains a bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Gree
23、ce, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. EN 13260:2003 (E) 5 Introduction The main purpose of normative documents used until now for the delivery of wheelsets (UIC leaflets, national standards
24、) was a complete definition of the acceptance procedures and of the wheelset characteristics which were to be verified. Product qualification was sometimes mentioned but the procedures used and the product characteristics to be verified during qualification were not given. This standard addresses th
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13260 2003
链接地址:https://www.31doc.com/p-3740031.html