《BS-EN-13709-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13709-2002.pdf(18页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13709:2002 Industrial valves Steel globe and globe stop and check valves The European Standard EN 13709:2002 has the status of a British Standard ICS 23.060.20; 23.060.50 ? BS EN 13709:2002 This British Standard was published under the authority of the Standards Policy and Str
2、ategy Committee on 15 April 2003 BSI 15 April 2003 ISBN 0 580 41584 8 National foreword This British Standard is the official English language version of EN 13709:2002. It supersedes BS 5160:1989 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee PSE/7,
3、Industrial valves, to Subcommittee PSE/7/6, Steel gate, globe and check valves, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publ
4、ications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the ne
5、cessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the in
6、terpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 15 and a back cover. The BSI
7、copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13709 October 2002 ICS 23.060.20; 23.060.50 English version Industrial valves - Steel globe and globe
8、stop and check valves Robinetterie industrielle - Robinets soupape et robinets clapet libre blocable en acier Industriearmaturen - Absperrventile und absperrbare Rckschlagventile aus Stahl This European Standard was approved by CEN on 19 August 2002. CEN members are bound to comply with the CEN/CENE
9、LEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN
10、 member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN memb
11、ers are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORM
12、ALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13709:2002 E EN 13709:2002 (E) 2 Contents page Foreword3 1Scope 4 2Normative refere
13、nces 4 3Terms and definitions6 4Requirements.6 4.1Design.6 4.2Functional characteristics 10 5Test procedures.12 6Declaration of compliance12 7Designation.12 8Marking and preparation for storage and transportation13 8.1Marking .13 8.2Preparation for storage and transportation13 Annex A (informative)
14、Information to be supplied by the purchaser14 Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives15 EN 13709:2002 (E) 3 Foreword This document EN 13709:2002 has been prepared by Technical Committee CEN/TC 69 “Industrial valv
15、es“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn at the latest by April 2003. This
16、document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document. In this Eur
17、opean Standard the annex A is informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland,
18、Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. EN 13709:2002 (E) 4 1 Scope This European Standard specifies the requirements for steel globe and globe stop and check valves which are wrought, cast or fabricated in straight, angle or obliqu
19、e pattern with end connections flanged, butt welding, socket welding or threaded. This standard is applicable to steel globe and globe stop and check valves mainly used for industrial and general purpose applications. However, they can be used for other applications provided the requirements of the
20、relevant performance standards are met. The range of nominal sizes covered is: DN 8; DN 10; DN 12; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400. DN 8 and DN 12 are not used for PN designated flanged end connections. DN 8, DN 1
21、0 and DN 12 are not used for Class designated flanged end connections. Socket welding end valves and threaded end valves are limited to the range DN 8 to DN 65. The range of pressure designations covered is: a) for flanged and butt welding end valves: PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; Class
22、 150; Class 300; Class 600. b) for socket welding end valves and threaded end valves: PN 40; PN 63; PN 100; Class 600; Class 800. NOTEClass 800 is a Class designation widely used for socket welding and threaded end valves. 2 Normative references This European Standard incorporates by dated or undate
23、d reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when i
24、ncorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 19, Industrial valves - Marking of metallic valves. EN 287-1, Approval testing of welders - Fusion welding - Part 1: Steels. EN 288-1, Specification
25、 and approval of welding procedures for metallic materials - Part 1: General rules for fusion welding. EN 558-1, Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 1: PN-designated valves. EN 558-2, Industrial valves - Face-to-face a
26、nd centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves. EN 13709:2002 (E) 5 EN 736-1, Valves - Terminology - Part 1: Definition of types of valves. EN 736-2, Valves - Terminology - Part 2: Definition of components of valves. EN 736-3, Valves -
27、Terminology - Part 3: Definition of terms. EN 1092-1, Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges. EN 1418, Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for
28、fully mechanized and automatic welding of metallic materials. EN 1503-1, Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards. EN 1503-2, Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards.
29、 EN 10045-1, Metallic materials - Charpy impact test - Part 1: Test method. EN 12351, Industrial valves - Protective caps for valves with flanged connections. EN 12570, Industrial valves - Method for sizing the operating element. EN 12627, Industrial valves - Butt welding ends for steel valves. EN 1
30、2760, Valves - Socket welding ends for steel valves. EN 12982, Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves. EN ISO 5210, Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991). prEN 1759-11), Flanges and their joints - Circular flanges f
31、or pipes, valves, fittings and accessories, Class- designated - Part 1: Steel flanges, NPS to 24. prEN 12266-11), Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria Mandatory requirements. EN 12266-2, Industrial valves - Testing of valves - Part 2
32、: Tests, test procedures and acceptance criteria - Supplementary requirements. prEN 12516-11), Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells. prEN 12516-21), Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells.
33、EN 12516-3, Industrial valves - Shell design strength - Part 3: Experimental method. ISO 7-1, Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation. ISO 228-1, Pipe threads where pressure-tight joints are not made on the threads - Part 1: D
34、imensions, tolerances and designation. ASME B1.20.1, Pipe Threads, General Purpose (Inch). 1)To be published EN 13709:2002 (E) 6 3 Terms and definitions For the purposes of this European Standard, the definitions of types of valves and components and the definitions of terms given in EN 736-1, EN 73
35、6-2 and EN 736-3 apply. NOTEThe terms maximum allowable pressure, PS, and test pressure, PT, defined in EU Directive 97/23/EC (PED) are equivalent to the terms allowable pressure, ps, and test pressure, pt, defined in EN 736-3. 4 Requirements 4.1 Design 4.1.1 Materials 4.1.1.1The body and bonnet mat
36、erials shall be selected from those listed in EN 1503-1 and EN 1503-2. 4.1.1.2All the internal parts in contact with the fluid shall be made of a material whose corrosion resistance to the fluid being carried is at least equal to the body and bonnet material. 4.1.1.3Trim materials shall have a chemi
37、cal composition and mechanical properties, which ensure the mechanical integrity of the valve. The trim comprises the following: a) stem; b) obturator seat; c) body seat; d) backseat (for valves DN 50 and above, when fitted). 4.1.1.4Stems shall be manufactured from forged, drawn or rolled material.
38、They shall have a minimum corrosion resistance equivalent to a 13 % chromium content ferritic steel. 4.1.2 Pressure/temperature ratings 4.1.2.1The pressure/temperature ratings shall be as specified in prEN 12516-1 for the particular body/bonnet material group. 4.1.2.2The pressure temperature ratings
39、 applicable to Class 800 socket welding and threaded end valves shall be the Class 600 rating for the applicable material group multiplied by the ratio of 800 : 600. 4.1.2.3Restrictions of temperature and pressure below those specified in 4.1.2.1 and 4.1.2.2 for example, those imposed by soft seals,
40、 special trims and bellows seal shall be indicated on the valve (see 8.1.2). 4.1.2.4For temperatures below the lowest temperature shown in the pressure/temperature rating tables in prEN 12516-1 the maximum allowable pressure shall be no greater than the pressure corresponding to the lowest temperatu
41、re in the rating tables. The use of valves at lower temperatures than shown in the rating tables is permitted providing the bending rupture energy of the body and bonnet material measured on three 10 mm x 10 mm specimens, in accordance with EN 10045-1, shall be no less than an average of 27 J at a t
42、emperature no higher than the lowest scheduled operating temperature. EN 13709:2002 (E) 7 4.1.3 Dimensions 4.1.3.1 Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions Face-to-face and centre-to-face dimensions for PN designated flanged end valves shall be in accordance with EN 558-
43、1. Face-to-face and centre-to-face dimensions of Class designated flanged end valves shall be in accordance with EN 558-2. The end-to-end and centre-to-end dimensions of butt welding end valves shall be in accordance with EN 12982. The end-to-end and centre-to-end dimensions of socket welding and th
44、readed end valves are at the choice of the manufacturer. 4.1.3.2 Body end 4.1.3.2.1Flanged ends shall comply with requirements of EN 1092-1 for PN designated flanges or prEN 1759-1 for Class designated flanges. Flanged ends shall be cast or forged integral with the body except that flanges may be at
45、tached by welding in accordance with 4.1.7. A full penetration butt weld shall be used for the attachment of flanges by welding on sizes larger than DN 50. 4.1.3.2.2Butt welding end profiles shall be in accordance with EN 12627. 4.1.3.2.3Socket welding end dimensions shall be in accordance with EN 1
46、2760. The minimum thickness of the pressure retaining material shall be in accordance with prEN 12516-1 or prEN 12516-2. 4.1.3.2.4Threaded ends shall be of the internal form in accordance with Type Rc and Rp to ISO 7-1 or Type G to ISO 228-1 or Type NPT to ASME B1.20.1. 4.1.3.3 Body end port inside
47、diameter The body end port shall be circular. For unlined valves, the body end port inside diameter shall be not less than the nominal inside diameter specified in Table 1. EN 13709:2002 (E) 8 Table 1 Nominal inside diameter of the body end port Dimensions in millimetres DNPN 10PN 16 Class 150 PN 25
48、PN 40 Class 300 PN 63PN 100 Class 600 Class 800 88868 8 68666 10101091010910999 1212121212121212111111 1515151313131313131312 2020201919191919191918 2525252525252525252523 3231313131313131313130 4040403838383838383836 5050505050505050505046 6563636363636363636360 80787876767676767676- 10010010010110
49、0100101100100101- 125125125127125125127125125127- 150150150152150150152150150152- 200200200203200200203200199199- 250250250254250250254250247247- 300300300304300300304300298298- 350343343336336336336336327327- 400394394387387387387384375375- 4.1.4 Operation 4.1.4.1 Stem operating thread The operating thread of the stem shall be of the outside screw type unless otherwise specified by the purchaser. 4.1.4.2 Operating device Unless otherwise specified by the purchaser the valve shall be suppli
链接地址:https://www.31doc.com/p-3740063.html