BS-EN-13722-2004.pdf
《BS-EN-13722-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13722-2004.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13722:2004 Furniture Assessment of the surface gloss The European Standard EN 13722:2004 has the status of a British Standard ICS 97.140 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 12:36:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13722:2004 This British S
2、tandard was published under the authority of the Standards Policy and Strategy Committee on 20 September 2004 BSI 20 September 2004 ISBN 0 580 44465 1 National foreword This British Standard is the official English language version of EN 13722:2004. The UK participation in its preparation was entrus
3、ted to Technical Committee FW/1, Common test methods for furniture, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referr
4、ed to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisi
5、ons of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals fo
6、r change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyrigh
7、t notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 12:36:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1
8、3722 July 2004 ICS 97.140 English version Furniture - Assessment of the surface gloss Meubles - Evaluation de la brillance des surfacesMbel - Bewertung des Oberflchenglanzes This European Standard was approved by CEN on 13 May 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regul
9、ations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This Eu
10、ropean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the na
11、tional standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. E
12、UROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13722:2004: E Licensed C
13、opy: sheffieldun sheffieldun, na, Mon Oct 30 12:36:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13722:2004 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .4 4 Principle5 5 Apparatus .5 6 Preparation and conditioning of test units .5 7 Calibration of gloss
14、meter .5 8 Test Procedure.5 8.1 General5 8.2 Textured and/or open grain surfaces 6 8.3 Other surfaces6 8.4 Expression of results 6 9 Test report8 Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 12:36:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13722:2004 (E) 3 Foreword This document (EN
15、13722:2004) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2005, and conflicting
16、national standards shall be withdrawn at the latest by January 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland,
17、France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 12:36:38 GMT+00:00 2006, Uncontrolled Copy
18、, (c) BSI EN 13722:2004 (E) 4 1 Scope This document specifies a method for the assessment of the surface gloss of furniture surfaces using three reflectometer geometries, 20, 60 or 85 and relates to rigid surfaces of all finished products regardless of materials, except for finishes on leather and f
19、abrics, which are excluded from this document. The test is intended to be carried out on finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test. It is not a
20、pplicable for finishes on some metallic paints and pearly coatings. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced doc
21、ument (including any amendments) applies. EN ISO 2813, Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20, 60 and 85 (ISO 2813:1994, including Technical Corrigendum 1:1997) 3 Terms and definitions For the purposes of this document, the following terms and defini
22、tions apply. 3.1 specular gloss ratio of the luminous flux reflected from an object in the specular direction for a specified source and receptor angle to the luminous flux reflected from glass with a refractive index of 1,567 in the specular direction 3.2 test unit finished item of furniture 3.3 Te
23、st surface part of the test unit, where the test area is included 3.4 test panel panel produced in the same way as the test surface; it shall be used when it is not possible to carry out the test directly on the test surface 3.5 test area area under the equipment, where the measurement is carried ou
24、t 3.6 pearly coatings coating with pearly additives. The pearly additives act like microscopy mirrors reflecting and transferring the light in several directions Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 12:36:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13722:2004 (E) 5 3.7 texture
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13722 2004
链接地址:https://www.31doc.com/p-3740090.html