BS-EN-13775-4-2004.pdf
《BS-EN-13775-4-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13775-4-2004.pdf(36页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13775-4:2004 Railway applications Measuring of new and modified freight wagons Part 4: Bogies with 2 wheelsets The European Standard EN 13775-4:2004 has the status of a British Standard ICS 45.060.20 ? BS EN 13775-4:2004 This British Standard was published under the authority
2、of the Standards Policy and Strategy Committee on 1 December 2004 BSI 1 December 2004 ISBN 0 580 44175 X National foreword This British Standard is the official English language version of EN 13775-4:2004. The UK participation in its preparation was entrusted by Technical Committee RAE/1, Railway ap
3、plications, to Subcommittee RAE/1/-/9, Wagons (tank/freight), which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. The members of Technical Committee RAE/1 and Panel RAE/1/-/9 believe that the last sentence in paragrap
4、h 2 of Clause 1 “Where appropriate, other measuring processes not specified here are necessary and are specified in each individual case.” is misleading and should be interpreted as “Where appropriate, other measuring processes not specified here may be necessary and will be specified in each indivi
5、dual case by the purchaser or operator.” Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” fa
6、cility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligati
7、ons. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of p
8、ages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 32, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROP
9、EAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13775-4 June 2004 ICS 45.060.20 English version Railway applications - Measuring of new and modified freight wagons - Part 4: Bogies with 2 wheelsets Applications ferroviaires - Mesure des wagons lors de leur construction et lors de modifications - Par
10、tie 4: Bogies deux essieux Bahnanwendungen - Vermessung von Gterwagen beim Neubau und bei Umbauten - Teil 4: Drehgestelle mit 2 Radstzen This European Standard was approved by CEN on 1 April 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condition
11、s for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three offi
12、cial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria,
13、Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATIO
14、N COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13775-4:2004: E EN 13775-4:2004 (E) Contents Page Foreword 3
15、 Introduction 4 1 Scope. 4 2 Normative references 4 3 Terms and definitions . 4 4 Symbols and abbreviations 4 5 Requirements 5 5.1 General. 5 5.2 Precondition 5 5.3 Measuring processes 5 5.3.1 General. 5 5.3.2 Measuring processes on bogie with laminated springs 5 5.3.3 Measuring processes on bogies
16、with other springs.15 Annex A (normative) Control sheet.24 Annex B (informative) Example of measuring process 1.26 Annex C (informative) Checking the height of the bogie pivot centre.29 C.1 Introduction29 C.2 Measurements29 Annex D (informative) Terminology31 Bibliography32 2 EN 13775-4:2004 (E) For
17、eword This document EN 13775-4:2004 has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the lates
18、t by December 2004, and conflicting national standards shall be withdrawn at the latest by December 2004. This European Standard EN 13775 “Railway applications Measurement of new and modified freight wagons“ comprises the following parts: Part 1: Measuring principles Part 2: Freight wagons with bogi
19、es Part 3: Freight wagons with 2 wheelsets Part 4: Bogies with 2 wheelsets Part 5: Bogies with 3 wheelsets Part 6: Multiple and articulated freight wagons Annex A is normative, Annexes B to D are informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of
20、the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spai
21、n, Sweden, Switzerland and the United Kingdom. 3 EN 13775-4:2004 (E) Introduction It is normal practice in all European countries to carry out checks and measurements on the major components of new and modified freight wagons and bogies. In view of the importance of uniform criteria for internationa
22、l transport in all European countries, this European Standard has been prepared. 1 Scope This European Standard specifies principles and requirements for measuring bogies with 2 wheelsets. This ensures that the measuring processes are applied in accordance with uniform criteria. It applies to new an
23、d modified bogies with 2 wheelsets. Provisions going beyond the scope of these requirements are generally agreed between the contracting parties involved. The measuring processes relate to the bogies with or without add-ons in their entirety or just part of them if the geometrical structure does not
24、 permit anything else. Where appropriate, other measuring processes not specified here are necessary and are specified in each individual case. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13775 2004
链接地址:https://www.31doc.com/p-3740112.html