BS-EN-15182-4-2007.pdf
《BS-EN-15182-4-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-15182-4-2007.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 15182-4:2007 Hand-held branchpipes for fire service use Part 4: High pressure branchpipes PN 40 The European Standard EN 15182-4:2007 has the status of a British Standard ICS 13.220.10 ? Licensed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:4
2、5:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 15182-4:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2007 BSI 2007 ISBN 978 0 580 50535 5 National foreword This British Standard was published by BSI. It is the UK implem
3、entation of EN 15182-4:2007. The UK participation in its preparation was entrusted by Technical Committee FSH/17, Fire brigade equipment, to Subcommittee FSH/17/1, Hydrants, hydrant systems, couplings and indicator plates. A list of organizations represented on FSH/17/1 can be obtained on request to
4、 its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Lice
5、nsed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:45:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15182-4 February 2007 ICS 13.220.10 English Version Hand-held branchpipes for fire service use - Part 4: High pre
6、ssure branchpipes PN 40 Lances main destines aux services dincendie et de secours - Partie 4 : Lances haute pression PN 40 Strahlrohre fr die Brandbekmpfung - Teil 4: Hochdruckstrahlrohre PN 40 This European Standard was approved by CEN on 23 December 2006. CEN members are bound to comply with the C
7、EN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or
8、 to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official ver
9、sions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
10、Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN nation
11、al Members. Ref. No. EN 15182-4:2007: E Licensed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:45:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15182-4:2007 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .4 4 Requirements.
12、5 5 Testing and proofs.9 Licensed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:45:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15182-4:2007 (E) 3 Foreword This European Standard (EN 15182-4:2007) has been prepared by Technical Committee CEN/TC 192 “Fire service
13、 equipment”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2007, and conflicting national standards shall be withdrawn at the latest by August 200
14、7. EN 15182 consists of the following parts, under the general title Hand-held branchpipes for fire service use: Part 1 : Common requirements; Part 2 : Combination branchpipes PN 16; Part 3 : Smooth bore jet and/or one fixed spray jet angle branchpipes PN 16; Part 4: High pressure branchpipes PN 40.
15、 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
16、 Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:45:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15182
17、-4:2007 (E) 4 1 Scope In addition to the requirements given in EN 15182-1, this document applies to hand-held high pressure branchpipes (nozzles) PN 40 with a maximum flow rate of 200 l/min at a reference pressure of 6 bar (0,6 MPa). It deals with: safety requirements; performance requirements; test
18、 methods; classification and designation; operating instructions; marking and maintenance. This part of this European Standard applies to branchpipes as defined in Annex A of EN 15182-1:2007. 2 Normative references The following referenced documents are indispensable for the application of this docu
19、ment. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15182-1:2007, Hand-held branchpipes for fire service use - Part 1: Common requirements 3 Terms and definitions For the purposes of
20、this document, the terms and definitions given in EN 15182-1:2007 and the following apply. 3.1 high pressure branchpipe branchpipe including a shut-off device and a variable pattern corresponding to the following definitions NOTE Branchpipe is defined in 3.1 of EN 15182-1:2007. 3.1.1 high pressure b
21、ranchpipe type 1 high pressure branchpipe with variable pattern at variable flow NOTE Changing pattern changes the flow. 3.1.2 high pressure branchpipe type 2 high pressure branchpipe with variable pattern at constant flow NOTE Changing pattern does not change the flow. Licensed Copy: London South B
22、ank University, London South Bank University, Mon Apr 16 02:45:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15182-4:2007 (E) 5 3.1.3 high pressure branchpipe type 3 high pressure branchpipe with variable pattern at selectable, constant flow NOTE Changing pattern does not change the flow. 3.1.4 h
23、igh pressure branchpipe type 4 (automatic branchpipe) high pressure branchpipe with constant pressure NOTE Changing pattern does not change the flow. 3.1.4.1 high pressure branchpipe type 4.1 high pressure branchpipe with variable pattern at constant pressure 3.1.4.2 high pressure branchpipe type 4.
24、2 high pressure branchpipe with variable pattern and selectable flow at constant pressure 3.2 jet 3.2.1 narrow spray jet intermediate position between the straight jet and the wide spray jet providing throw as well as protection 3.2.2 wide spray jet jet solely providing protection for the operator(s
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 15182 2007
链接地址:https://www.31doc.com/p-3740148.html