BS-EN-15095-2007.pdf
《BS-EN-15095-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-15095-2007.pdf(46页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 15095:2007 Power-operated mobile racking and shelving, carousels and storage lifts Safety requirements The European Standard EN 15095:2007 has the status of a British Standard ICS 53.080 ? Licensed Copy: London South Bank University, London South Bank University, Thu Dec 20 03
2、:19:31 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 15095:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2007 BSI 2007 ISBN 978 0 580 54854 3 National foreword This British Standard is the UK implementation of EN 15095:2
3、007. The UK participation in its preparation was entrusted to Technical Committee MHE/14, Rail dependent storage and retrieval equipment Safety. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the nec
4、essary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, T
5、hu Dec 20 03:19:31 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15095 November 2007 ICS 53.080 English Version Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements Elvateurs de stockage, carrousels et rayonna
6、ge mobile commande mcanique - Prescriptions de scurit Kraftbetriebene verschiebbare Paletten- und Fachbodenregale, Umlaufregale und Lagerlifte - Sicherheitsanforderungen This European Standard was approved by CEN on 23 September 2007. CEN members are bound to comply with the CEN/CENELEC Internal Reg
7、ulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. Thi
8、s European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are
9、the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerl
10、and and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN
11、 15095:2007: E Licensed Copy: London South Bank University, London South Bank University, Thu Dec 20 03:19:31 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15095:2007 (E) 2 Contents Page Foreword4 Introduction.5 1 Scope 6 2 Normative references6 3 Terms and definitions .7 4 Significant hazards9 4.1
12、Mechanical hazards.9 4.2 Electrical power hazards.9 4.3 Hazards through ignoring ergonomic principles in machine design.10 4.4 Hazards caused through failure of power supply, failure of machine parts or other functional faults.10 4.5 Hazards arising from inappropriate design or failure of safety sys
13、tems 10 4.6 Hazards caused through electromagnetic influences.10 4.7 List of significant hazards 10 5 Safety requirements and protective measures.13 5.1 General requirements13 5.2 Mechanical hazards.13 5.3 Electrical hazards 20 5.4 Ergonomics21 5.5 Power supply faults, machine parts failing or other
14、 malfunctions 22 6 Verification of the safety requirements and/or protective measures.23 6.1 Conformity of safety measures to safety requirements23 6.2 Design/Manufacturing phase25 6.3 At the installation site, before power is switched on.25 6.4 Commissioning26 7 Information for the user 26 7.1 Inst
15、ruction handbook26 7.2 Marking.28 Annex A (informative) Types of power-operated storage equipment30 Annex B (informative) Power-operated mobile storage systems.33 Annex C (informative) Rail tolerances for mobile racking35 Annex D (normative) Rack and pinion38 D.1 Pinion38 D.2 Rack(s)38 D.3 Rack/pini
16、on(s) engagement38 Annex E (informative) Chains in vertical carousels.40 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC41 Bibliography42 Licensed Copy: London South Bank University, London South Bank University, Thu Dec 20 0
17、3:19:31 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15095:2007 (E) 3 Figures Figure A.1 Storage equipment with vertically circulating carriers (vertical carousels).30 Figure A.2 Storage equipment with horizontally circulating carriers (horizontal carousels)30 Figure A.3 Storage lift31 Figure A.4 M
18、obile shelving.31 Figure A.5 Mobile racking32 Figure B.1 Clearances to building parts (see 5.2.4.2) .33 Figure B.2 Protective devices and edge clearance according to 5.2.4.3 33 Figure B.3 Example of a cable barrier .34 Figure B.4 Example of local protection on mobile racking according to 5.2.4.734 F
19、igure C.1 Twist of the rail35 Figure C.2 Maximum absolute vertical tolerances.35 Figure C.3 Maximum relative vertical tolerance.36 Figure C.4 Maximum inclination of the rails.36 Figure C.5 Straightness of the rails .36 Figure C.6 Uneven floor.37 Figure D.1 Rack / pinion(s) engagement.39 Figure E.1 T
20、hird deep system40 Figure E.2 Horizontal system.40 Tables Table 1 List of significant hazards .11 Table 224 Licensed Copy: London South Bank University, London South Bank University, Thu Dec 20 03:19:31 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15095:2007 (E) 4 Foreword This document (EN 15095:2
21、007) has been prepared by Technical Committee CEN/TC 149 “Power-operated warehouse equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2008, an
22、d conflicting national standards shall be withdrawn at the latest by May 2008. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s
23、), see informative Annex ZA, which is an integral part of this document. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to
24、the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithu
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 15095 2007
链接地址:https://www.31doc.com/p-3740168.html