BS-EN-15035-2006.pdf
《BS-EN-15035-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-15035-2006.pdf(40页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 15035:2006 Heating boilers Special requirements for oil fired room sealed units up to 70 kW The European Standard EN 15035:2006 has the status of a British Standard ICS 97.100.40 ? Licensed Copy: London South Bank University, London South Bank University, Thu Jan 18 01:30:33 G
2、MT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 15035:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2007 BSI 2007 ISBN 978 0 580 49906 7 National foreword This British Standard was published by BSI. It is the UK implementati
3、on of EN 15035:2006. The UK participation in its preparation was entrusted to Technical Committee RHE/10, Heating boilers. A list of organizations represented on RHE/10 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contrac
4、t. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Thu Jan 18 01:30:33 GMT+00:00 2
5、007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15035 December 2006 ICS 97.100.40 English Version Heating boilers - Special requirements for oil fired room sealed units up to 70 kW Chaudires de chauffage - Systme de circuit de combustion tanche des chaudires au f
6、ioul Heizkessel - Besondere Anforderungen an lbefeuerte Units fr den raumluftunabhngigen Betrieb bis einschlielich 70 kW This European Standard was approved by CEN on 4 November 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
7、this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions
8、 (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cypr
9、us, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION CO
10、MIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15035:2006: E Licensed Copy: London South Bank University, Londo
11、n South Bank University, Thu Jan 18 01:30:33 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15035:2006 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references5 3 Terms and definitions .5 4 Boiler classification.6 5 Construction and materials 8 6 Operational requirements.10 7 Test methods14 8 M
12、arking and instructions21 Annex A (informative) Classification of type C boilers .32 Annex B (informative) Steel grades.34 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 92/42/EEC on efficiency requirements for new hot-water boilers
13、fired with liquid or gaseous fuels35 Bibliography36 Licensed Copy: London South Bank University, London South Bank University, Thu Jan 18 01:30:33 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15035:2006 (E) 3 Foreword This document (EN 15035:2006) has been prepared by Technical Committee CEN/TC 57
14、“Central heating boilers”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest b
15、y June 2007. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this docu
16、ment. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latv
17、ia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: London South Bank University, London South Bank University, Thu Jan 18 01:30:33 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15035:2006
18、 (E) 4 1 Scope This European Standard applies to type CX3 central heating boilers as specified in 4.1, equipped with atomizing oil burners: type C13, type C33, and type C53 boilers, including their combustion air supply and combustion products evacuation ducts and their terminals; type C43 boilers i
19、ncluding their connection ducts but without the chimney which is erected as a shared duct system and which is part of the building; type C63 boilers, including the connecting piece as specified in 3.7, if not integrated into the boiler; type C83 boilers, including their connection ducts but without
20、the chimney which is part of the building; that have a nominal useful heat output below or equal to 70 kW; where the temperature of the water does not exceed 100 C during normal operation; where the maximum water-side operating pressure does not exceed 8 bar. This European Standard is intended to es
21、tablish specific requirements and test methods for type C atomizing oil burning central heating boilers with respect to construction, safety, fitness for purpose, rational use of energy, classification and marking. This European Standard covers only standard tests. For boilers that produce domestic
22、hot water by a drum or a heat exchanger, integrated or juxtaposed, (by accumulation of instant production), this standard only applies to hot water reheating system components that are not subject to operating conditions applicable to the boiler heating system. This European Standard covers units co
23、nsisting of boilers equipped with burners that meet the requirements of EN 267, with the following exceptions: maximum NOx and CO emission values, estimated for boilers according to the classes defined in EN 303-2; air factor value, defined by the manufacturer and stated in the boilers technical spe
24、cifications; marking and/or burner data plate which may provide information for the boiler data plate; installation recommendations for installing the burner on the boiler included in the boiler operating instructions. This European Standard modifies EN 303-1, EN 303-2, EN 304 and specifies suppleme
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 15035 2006
链接地址:https://www.31doc.com/p-3740272.html