BS-EN-1606-1997.pdf
《BS-EN-1606-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-1606-1997.pdf(22页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 1606:1997 Incorporating Amendments Nos. 1 and 2 Thermal insulating products for building applications Determination of compressive creep The European Standard EN 1606:1996, incorporating amendment A1:2006, has the status of a British Standard ICS 91.100.99; 91.120.10 ? BS EN 1
2、606:1997 This British Standard, having been prepared under the direction of the Sector Board for Building and Civil Engineering, was published under the authority of the Standards Board and comes into effect on 15 June 1997 The following BSI references relate to the work on this standard: Subcommitt
3、ee reference B/540/1 Draft for comment 94/108642 DC ISBN 0 580 27351 2 Committees responsible for this British Standard The preparation of this British Standard was entrusted by Technical Committee B/540, Energy performance of materials, components and buildings, to Subcommittee B/540/1, European St
4、andards for thermal insulation, upon which the following bodies were represented: Association of Building Component Manufacturers Association for the Conservation of Energy Association of Lightweight Aggregate Manufacturers Autoclaved Aerated Concrete Products Association Brick Development Associati
5、on British Rigid Urethane Foam Manufacturers Association British Vermiculite Association Building Employers Confederation Chartered Institution of Building Services Engineers Concrete Block Association Cork Industry Federation Department of the Environment (Building Research Establishment) Departmen
6、t of the Environment (Construction Directorate) Department of Trade and Industry (National Physical Laboratory) Eurisol (UK Mineral Wool Association) European Phenolic Foam Association Glass and Glazing Association Meteorological Office National House-building Council Thermal Insulation Contractors
7、Association Thermal Insulation Manufacturers and Suppliers Association (TIMSA) Wood Wool Slab Manufacturers Association BSI 2006 Amendments issued since publication Amd. No. DateComments 9745November 1997Incorporation of CEN corrigenda. Changes to contents page, Clause 9 and Table B.1 1680529 Decemb
8、er 2006See national foreword BS EN 1606:1997 i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 16065 List of referencesInside back cover BSI 2006 BS EN 1606:1997 ii National foreword This British Standard was published by BSI. It is the UK implementati
9、on of EN 1606:1996, incorporating amendment A1:2006. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. The U
10、K participation in its preparation was entrusted by Technical Committee B/540, Energy performance of materials, components and buildings, to Subcommittee B/540/1, European standards for thermal insulation. A list of organizations represented on B/540/1 can be obtained on request to its secretary. Th
11、is British Standard is one of several general test methods for thermal insulating products for building applications, the EN versions of which are being prepared in CEN/TC 88. This British Standard will be implemented in the United Kingdom, and all conflicting national standards or Parts of standard
12、s withdrawn, when the complete series of standards comprising test methods and product specifications has been published. Cross-reference This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a Brit
13、ish Standard cannot confer immunity from legal obligations. Publication referred toCorresponding British Standard EN 826:1996BS EN 826:1996 Thermal insulating products for building applications Determination of compression behaviour BSI 2006 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1606
14、November 1996 ICS 91.120.10Incorporating corrigendum Descriptors: Buildings, thermal insulation, thermal insulating materials, compression tests, creep tests, testing conditions English version Thermal insulating products for building applications Determination of compressive creep Produits isolants
15、 thermiques destins aux applications du btiment Dtermination du fluage en compression Wrmedmmstoffe fr das Bauwesen Bestimmung des Langzeit-Kriechverhaltens bei Druckbeanspruchung This European Standard was approved by CEN on 1996-10-05. CEN members are bound to comply with the CEN/CENELEC Internal
16、Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. Th
17、is European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are t
18、he national standards organizations of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches
19、 Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 Copyright reserved to CEN members Ref. No. EN 1606:1996 E + A1 September 2006 EN 1606:1996 2 Foreword This European Standard has been prepared by Technical Committee CEN/TC 88, Thermal insulating materials and products
20、, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 1997, and conflicting national standards shall be withdrawn at the latest by December 1997. This Euro
21、pean Standard is one of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 Decem
22、ber 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard contains two annexes: Annex A (normative) Calculation method
23、Annex B (informative) Example of a linear regression analysis This European Standard has been drafted for applications in buildings but it may also be used in other areas where it is relevant. In pursuance of Resolution BT 20/1993 Revised, CEN/TC 88 has proposed defining the standards listed below a
24、s a European “package” of standards, setting December 31, 1997 as the date of withdrawal (dow) of national standards which conflict with the European Standards of this package. The “package” of standards comprises the following group of inter-related standards on test methods for determining dimensi
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 1606 1997
链接地址:https://www.31doc.com/p-3740331.html