BS-EN-15271-2007.pdf
《BS-EN-15271-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-15271-2007.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 15271:2007 Inland navigation vessels Studless anchor chain Anchor equipment The European Standard EN 15271:2007 has the status of a British Standard ICS 47.020.50; 47.060 ? Licensed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:47:26 GMT+00:00
2、 2007, Uncontrolled Copy, (c) BSI BS EN 15271:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2007 BSI 2007 ISBN 978 0 580 50481 5 National foreword This British Standard was published by BSI. It is the UK implementation of EN 1
3、5271:2007. The UK participation in its preparation was entrusted by Technical Committee SME/32, Ships and marine technology Steering committee, to Subcommittee SME/32/7, Ships and marine technology Inland navigation vessels. A list of organizations represented on SME/32/7 can be obtained on request
4、to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Li
5、censed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:47:26 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15271 March 2007 ICS 47.020.50; 47.060 English Version Inland navigation vessels - Studless anchor chain - Anch
6、or equipment Bateaux de navigation intrieure - Chane dancre sans pignon - Equipement dancre Fahrzeuge der Binnenschifffahrt - Steglose Ankerkette - Ankerausrstung This European Standard was approved by CEN on 3 February 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations
7、which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This Europea
8、n Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the natio
9、nal standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and U
10、nited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15271:20
11、07: E Licensed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:47:26 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15271:2007 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .4 4 Safety requirements 4 4.1 Chain locker .4 4.2 End
12、 fastening.4 4.3 Chain stopper.5 5 Material .5 6 Manufacturers certificate.5 7 Designation 5 8 Marking.5 Annex A (informative) Examples of end fastening and chain stopper 7 A.1 Slip hook as end fastening.7 A.2 End fastening.9 A.3 Chain stopper.10 Annex B (informative) Calculation aids for anchor and
13、 anchor chain design - Requirements for anchors and anchor chains subject to the requirements of Chapter 10, Annex II of Directive 2006/87/EC or Chapter 10 of the Rhine Vessel Inspection Order.11 Bibliography13 Figures Figure A.1 Slip hook 7 Figure A.2 End fastening, suitable for nominal size 23x64
14、9 Figure A.3 Chain stopper . 10 Tables Table A.1 Dimensions and masses of slip hooks 8 Table B.1 Coefficient c 11 Licensed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:47:26 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 15271:2007 (E) 3 Foreword This document (EN 1
15、5271:2007) has been prepared by Technical Committee CEN/TC 15 “Inland navigation vessels”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007,
16、and conflicting national standards shall be withdrawn at the latest by September 2007. The standard specifies requirements for anchor equipment within the meaning of Annex II of Directive 2006/87/EC of the European Parliament and of the Council of 12 December 2006 laying down technical requirements
17、for inland waterway vessels and repealing Council Directive 82/714/EEC. The anchor equipment consists of: a) windlass according to EN 13711; b) cable lifter according to EN 14874; c) accessories according to EN 14606; d) anchor chain according to EN 14330; e) anchor equipment covered by this standar
18、d and f) anchor. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
19、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: London South Bank University, London South Bank University, Mon Apr 16 02:47:26 GMT+00:00 2007, Uncontrolled Co
20、py, (c) BSI EN 15271:2007 (E) 4 1 Scope This European Standard specifies requirements for anchor equipment for inland navigation vessels. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition
21、cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies EN 14330, Inland navigation vessels Studless anchor chain Round steel link chain EN 14606, Inland navigation vessels Studless anchor chain Accessories 3 Terms and definitions For t
22、he purposes of this document, the terms and definitions given in EN 14606 and the following apply. 3.1 chain locker compartment where the anchor chain is stored 3.2 end fastening fastening of the anchor chain to the vessel 3.3 chain stopper device connected to the vessel, separate from the chain lif
23、ter, for holding the anchor chain when the windlass is released 4 Safety requirements 4.1 Chain locker The chain locker shall accommodate the whole length of the anchor chain as it comes to rest in the chain locker without any outside aid. Each chain shall have its own chain locker. The chain length
24、 and size are based on the national specifications as a function of the area of travel and vessel size. If no data are available, some calculation aids are given in Annex B. It shall be possible to store the anchor chain in the chain locker, e.g. on a perforated plate, so that water and solid materi
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 15271 2007
链接地址:https://www.31doc.com/p-3740450.html