BS-EN-2591-414-1998.pdf
《BS-EN-2591-414-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-2591-414-1998.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD AEROSPACE SERIES BS EN 2591-414:1998 Elements of electrical and optical connection Test methods Part 414: Unmating of lanyard release connectors The European Standard EN 2591-414:1998 has the status of a British Standard ICS 49.060 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov
2、 02 18:03:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 2591-414:1998 This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 November 1998 BSI 05-1999 ISBN 0 5
3、80 30713 1 National foreword This British Standard is the English language version of EN 2591-414:1998. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic, electrical and fibre optic technology, to Subcommittee ACE/6/3, Aerospace connectors, which h
4、as the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in
5、 the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section enti
6、tled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Complia
7、nce with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 4 and a back cover. This standard has been updated (see copyright date) and may have had
8、 amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 02 18:03:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 2591-414:1998 BSI 05-1999i Cont
9、ents Page National forewordInside front cover Foreword2 Text of EN 2591-4143 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 02 18:03:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 02 18:03:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
10、EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2591-414 August 1998 ICS 49.060 Descriptors: Aircraft industry, aircraft equipment, connecting equipment, test English version Aerospace series Elements of electrical and optical connection Test methods Part 414: Unmating of lanyard release connec
11、tors Srie arospatiale Organes de connexion lectrique et optique Mthodes dessais Partie 414: Dsaccouplement des connecteurs largables Luft- und Raumfahrt Elektrische und optische Verbindungselemente Prfverfahren Teil 414: Trennung von Steckverbindem mit Kabelzugentriegelung This European Standard was
12、 approved by CEN on 29 January 1998. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such na
13、tional standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and
14、notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerla
15、nd and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref.
16、No. EN 2591-414:1998 E Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 02 18:03:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 2591-414:1998 BSI 05-1999 2 Foreword This European Standard has been prepared by the European Association of Aerospace Manufacturers (AECMA). After inquiries and votes
17、 carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, e
18、ither by publication of an identical text or by endorsement, at the latest by February 1999, and conflicting national standards shall be withdrawn at the latest by February 1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bo
19、und to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword2 1Scope3 2Normative references3 3Prepara
20、tion of specimens3 4Apparatus3 5Method3 Figure 14 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 02 18:03:17 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BSI 05-19993 EN 2591-414:1998 1 Scope This standard specifies a method of assessing the unmating ability of lanyard release connectors. It shal
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 2591 414 1998
链接地址:https://www.31doc.com/p-3740636.html