BS-EN-2591-401-1996.pdf
《BS-EN-2591-401-1996.pdf》由会员分享,可在线阅读,更多相关《BS-EN-2591-401-1996.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD AEROSPACE SERIES BS EN 2591-401:1996 Elements of electrical and optical connection Test methods Part 401: Acceleration, steady state The European Standard EN 2591-401:1996 has the status of a British Standard ICS 49.060 Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 02 17:55:56
2、 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 2591-401:1996 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 June 1996 BSI 01-2000 The following BSI references rel
3、ate to the work on this standard: Committee reference ACE/6 Draft for comment 91/74943 DC ISBN 0 580 25961 7 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee ACE/6, Aerospace avionic, electrical and fibre-optic technology,
4、 upon which the following bodies were represented: British Airways British Cable Makers Confederation British Rubber Manufacturers Association Civil Aviation Authority (Airworthiness Division) Federation of the Electronics Industry Ministry of Defence Society of British Aerospace Companies Amendment
5、s issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 02 17:55:56 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 2591-401:1996 BSI 01-2000i Contents Page Committees responsibleInside front cover National forewordii Foreword2 1Scope3 2Normative referenc
6、es3 3Preparation of the specimens3 4Apparatus3 5Method3 Table 13 List of referencesInside back cover Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 02 17:55:56 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 2591-401:1996 ii BSI 01-2000 National foreword This British Standard has been prepared
7、 by Technical Committee ACE/6 and is the English language version of EN 2591-401:1996 Aerospace series Elements of electrical and optical connection Test methods Part 401: Acceleration, steady state, published by the European Committee for Standardization (CEN). It supersedes BS EN 2591-D1:1992 whic
8、h is withdrawn. BS EN 2591-401:1996 was produced as a result of international discussions in which the United Kingdom took an active part. Cross-references The British Standards corresponding to the European Standards referred to in the text are identical in number and title with those given in clau
9、se 2 with the exception of EN 2591-408 which is in preparation by CEN. It is envisaged that upon publication of EN 2591-408 it will be implemented as a British Standard. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsi
10、ble for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 4, an inside back cover and a back cover. This
11、 standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Thu Nov 02 17:55:56 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPE
12、NNE EUROPISCHE NORM EN 2591-401 February 1996 ICS 49.060Supersedes EN 2591-D1:1992 Descriptors: Aerospace industry, aircraft equipment, elements of electrical and optical connection, test English version Aerospace series Elements of electrical and optical connection Test methods Part 401: Accelerati
13、on, steady state Srie arospatiale Organes de connexion lectrique et optique Mthodes dessais Partie 401: Accleration constante Luft- und Raumfahrt- Elektrische und optische Verbindungselemente- Prfverfahren Teil 401: Konstante Beschleunigung This European Standard was approved by CEN on 1992-10-19. C
14、EN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on ap
15、plication to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat ha
16、s the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Stan
17、dardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members. Ref. No. EN 2591-401:1996 E Licensed Cop
18、y: sheffieldun sheffieldun, na, Thu Nov 02 17:55:56 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 2591-401:1996 BSI 01-2000 2 Foreword This European Standard has been prepared by the European Association of Aerospace Manufacturers (AECMA). The alphanumerical designation of the Parts of EN 2591 has b
19、een abandoned for a numerical designation in line with the Internal Regulations of CEN/CENELEC. This European Standard is the integral reproduction of the European Standard EN 2591-D1 after application of this decision, without any other modification than the change in numbering. This European Stand
20、ard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 1996, and conflicting national standards shall be withdrawn at the latest by August 1996. According to the CEN/CENELEC Internal Regulations, the national standa
21、rds organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheff
22、ieldun, na, Thu Nov 02 17:55:56 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 2591-401:1996 BSI 01-20003 1 Scope This standard specifies a method to determine the ability of an element of connection to withstand steady-state accelerations. It shall be used together with EN 2591. 2 Normative referenc
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 2591 401 1996
链接地址:https://www.31doc.com/p-3740657.html