BS-EN-13589-2008 BS-2000-520-2008.pdf
《BS-EN-13589-2008 BS-2000-520-2008.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13589-2008 BS-2000-520-2008.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13589:2008 BS 2000-520:2008 Bitumen and bituminous binders Determination of the tensile properties of modified bitumen by the force ductility method ICS 75.140; 91.100.50 ? Licensed CopyChinese University of Hong Kong, 21/10/2008 07:37, Uncontrolled Copy, (c) BSI BS EN 13589:2
2、008 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 August 2008 BSI and Energy Institute 2008 ISBN 978 0 580 59464 9 National foreword This British Standard is the UK implementation of EN 13589:2008. It supersedes BS EN 13589:2003/BS 2000-
3、520:2003 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PTI/13, Petroleum testing and terminology. A list of organizations represented on this committee can be obtained on request to its secretary. Energy Institute, under the brand of IP, publishes a
4、nd sells all Parts of BS 2000, and all BS EN petroleum test methods that would be Part of BS 2000, both in its annual publication Standard methods for analysis and testing of petroleum and related products and British Standard 2000 Parts and individually. Further information is available from: Energ
5、y Institute, 61 New Cavendish Street, London W1G 7AR. Tel: 020 7467 7100. Fax: 020 7255 1472. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from leg
6、al obligations. Amendments/corrigenda issued since publication DateComments Licensed CopyChinese University of Hong Kong, 21/10/2008 07:37, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13589 March 2008 ICS 91.100.50Supersedes EN 13589:2003 English Version Bitumen a
7、nd bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method Bitumes et liants bitumineux - Dtermination des caractristiques de traction des bitumes modifis par la mthode de force-ductilit Bitumen und bitumenhaltige Bindemittel - Bestimmung der St
8、reckeigenschaften von modifiziertem Bitumen mit dem Kraft-Duktilitts-Verfahren This European Standard was approved by CEN on 21 January 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nat
9、ional standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in
10、 any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark,
11、 Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION
12、 EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13589:2008: E Licensed CopyChinese University of Hong Kong, 21/10/2008 07:37, Uncontrolled C
13、opy, (c) BSI 2 Contents page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .4 4 Principle5 5 Apparatus .5 6 Preparation and conservation of samples for testing .6 7 Procedure .7 8 Expression of results 7 9 Precision.7 10 Test report7 Bibliography9 BS EN 13589:2008 EN 13589:2008
14、 (E) Licensed CopyChinese University of Hong Kong, 21/10/2008 07:37, Uncontrolled Copy, (c) BSI 3 Foreword This document (EN 13589:2008) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This European Standard shall be given the stat
15、us of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2008, and conflicting national standards shall be withdrawn at the latest by September 2008. Attention is drawn to the possibility that some of the elements of this document may be the
16、 subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13589:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement
17、 this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and
18、the United Kingdom. BS EN 13589:2008 EN 13589:2008 (E) Licensed CopyChinese University of Hong Kong, 21/10/2008 07:37, Uncontrolled Copy, (c) BSI 4 1 Scope This European Standard specifies a method for determining the tensile properties of a bituminous binder, in particular those of polymer-modified
19、 bitumens by means of a force ductility test. The work done during the force ductility test is a criterion for assessing the quality of these materials. WARNING The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to add
20、ress all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2 Normative references The following referenced documen
21、ts are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 58, Bitumen and bituminous binders Sampling bituminous binders EN 1431, Bitume
22、n and bituminous binders Determination of recovered binder and oil distillate from bitumen emulsions by distillation EN 12594, Bitumen and bituminous binders Preparation of test samples EN 13074, Bitumen and bituminous binders Recovery of binder from bitumen emulsions by evaporation EN 13398, Bitume
23、n and bituminous binders Determination of the elastic recovery of modified bitumen EN 13703, Bitumen and bituminous binders Determination of deformation energy EN 14895, Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsion or from cut- back and fluxed bituminous binders
24、3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 tensile force force undergone by a specimen subjected to extension, expressed in N 3.2 elongation increase in length of a specimen, expressed in metres NOTE Elongation is also expressed in % fro
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-13589-2008 BS-2000-520-2008 BS EN 13589 2008 2000 520
链接地址:https://www.31doc.com/p-3740791.html