BS-EN-13231-2-2006.pdf
《BS-EN-13231-2-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13231-2-2006.pdf(22页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13231-2:2006 Railway applications Track Acceptance of works Part 2: Works on ballasted track Switches and crossings The European Standard EN 13231-2:2006 has the status of a British Standard ICS 45.080 ? Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:57:06 GMT+00:00
2、 2006, Uncontrolled Copy, (c) BSI BS EN 13231-2:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2006 BSI 2006 ISBN 0 580 48622 2 National foreword This British Standard is the official English language version of EN 13231-2:2006.
3、 The UK participation in its preparation was entrusted to Technical Committee RAE/2, Railway track components, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement in
4、ternational or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not p
5、urport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European commi
6、ttee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 18, a
7、n inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:57:06 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
8、EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13231-2 May 2006 ICS 45.080 English Version Railway applications - Track - Acceptance of works - Part 2: Works on ballasted track - Switches and crossings Applications ferroviaires - Voie - Rception des travaux - Partie 2 : Travaux de voie ballast
9、e - Appareils de voie Bahnanwendungen - Oberbau - Abnahme von Arbeiten - Teil 2: Arbeiten im Schotteroberbau - Weichen und Kreuzungen This European Standard was approved by CEN on 13 April 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions
10、for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three offici
11、al versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Be
12、lgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDAR
13、DIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13231-2:2006: E Licensed Copy: sheffieldun sheffieldu
14、n, na, Sun Oct 29 10:57:06 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13231-2:2006 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .4 4 Acceptance of works on switches and crossings5 4.1 General5 4.2 Acceptance deadlines.6 4.3 Acceptance measurements and ch
15、ecks .6 4.4 Acceptance documents 7 4.5 Relative track geometry 7 4.5.1 Tolerances7 4.5.2 Parameters .10 4.6 Absolute track position.12 4.6.1 Tolerances for absolute vertical position of the track.12 4.6.2 Tolerances for absolute lateral position of the track.12 4.7 Other parameters and verifications
16、.12 4.7.1 Check rail to check rail gauge12 4.7.2 Squareness of switches12 4.7.3 Longitudinal relationship of switch tip to stock rail 12 4.7.4 Longitudinal position of the switch and crossing to the design position.12 4.7.5 Absolute vertical position of the switch and crossing layout 12 4.7.6 Absolu
17、te lateral position of the switch and crossing layout 13 4.7.7 Check of the lead offsets 13 4.7.8 Bearer position.13 4.7.9 Voiding of bearers .13 4.7.10 Fasteners13 4.7.11 Welds 13 4.7.12 Fishplated joints 13 4.7.13 Insulated joints.13 4.7.14 Functional check13 4.7.15 Expansion devices.13 4.8 Accept
18、ance responsibilities and acceptance form14 4.9 Warranty .14 Annex A (informative) Acceptance responsibilities 15 Annex B (informative) Example of an acceptance form16 Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:57:06 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13231-2:2006 (E) 3 For
19、eword This document (EN 13231-2:2006) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the lat
20、est by November 2006, and conflicting national standards shall be withdrawn at the latest by November 2006. This European Standard is one of the series EN 13231 “Railway applications Track Acceptance of works“ as listed below: Part 1: Works on ballasted track - Plain line Part 2: Works on ballasted
21、track - Switches and crossings Part 3: Acceptance of rail grinding, milling and planing work in track According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Repu
22、blic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29
23、10:57:06 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13231-2:2006 (E) 4 1 Scope This European Standard specifies the requirements and tolerances for the acceptance of track work associated with switch and crossing layouts (also includes work on expansion devices) on ballasted track for 1 435 mm an
24、d wider gauge railways. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13231 2006
链接地址:https://www.31doc.com/p-3740825.html