BS-EN-13977-2005.pdf
《BS-EN-13977-2005.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13977-2005.pdf(44页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13977:2005 Incorporating amendment no. 1 Railway applications Track Safety requirements for portable machines and trolleys for construction and maintenance The European Standard EN 13977:2005, incorporating amendment A1:2007, has the status of a British Standard ICS 45.120 ? L
2、icensed Copy: London South Bank University, London South Bank University, Sat Sep 01 03:19:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 13977:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 18 April 2005 BSI 2007 ISBN 978 0 580 59
3、823 4 National foreword This British Standard is the UK implementation of EN 13977:2005, incorporating amendment A1:2007. The UK participation in its preparation was entrusted to Technical Committee RAE/2, Railway track components. A list of organizations represented on this committee can be obtaine
4、d on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. Da
5、teComments 1728931 August 2007Implementation of CEN amendment A1:2007 Licensed Copy: London South Bank University, London South Bank University, Sat Sep 01 03:19:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13977:2005+A1 July 2007 ICS 45.120 Engl
6、ish Version Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance Applications ferroviaires - Voie - Prescriptions de scurit pour machines et lorries portables pour la construction et la maintenance Bahnanwendungen - Oberbau - Sicherhe
7、itsanforderungen an tragbare Maschinen und Rollwagen fr Bau und Instandhaltung This European Standard was approved by CEN on 20 August 2004 and includes Amendment 1 approved by CEN on 26 May 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condition
8、s for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three of
9、ficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austr
10、ia, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMI
11、TTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13977:2005+A1:2007: E Supersedes EN
12、13977:2005 Licensed Copy: London South Bank University, London South Bank University, Sat Sep 01 03:19:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 13977:2005+A1:2007 (E) 2 Contents page Foreword4 0 Introduction5 1 Scope 6 1.1 General6 1.2 Validity of this document6 2 Normative references7 3 Ter
13、ms and definitions .8 4 List of significant hazards 8 5 Safety requirements and/or safety measures.8 5.1 General8 5.2 Handling devices .9 5.3 Wheels and rollers.9 5.4 Immobilisation device .10 5.5 Clamping and/or supporting devices 10 5.6 Power generation and transmission equipment 10 5.7 Tools .11
14、5.8 Interlocking device 11 5.9 Location of control devices11 5.10 Warning devices 11 5.11 Isolation from external electrical voltages11 5.12 Lighting.11 5.13 Prevention of emission of pollutants.11 5.14 Painting.12 5.15 Stability.12 5.16 Conformance to gauge12 5.17 Time for off-tracking12 6 Verifica
15、tion of the safety requirements and/or measures.13 6.1 General13 6.2 Type verification 13 6.3 Conformity to type.13 6.4 Verification methods .13 6.5 Conformity evaluation procedures14 7 Information for use14 7.1 General14 7.2 Instruction handbook14 Licensed Copy: London South Bank University, London
16、 South Bank University, Sat Sep 01 03:19:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 13977:2005+A1:2007 (E) 3 7.3 Instructions for assembly.14 7.4 Instructions for use.15 7.5 Marking.18 7.6 Symbols and warning devices .18 Annex A (normative) List of significant hazards.19 Annex B (normative) Cl
17、earance gauge for portable machines and trolleys 21 Annex C (normative) Type verification.23 Annex D (informative) Declaration of type verification 26 Annex E (normative) Portable machine and trolley marking.27 Annex F (normative) Conformity to type verification .28 Annex G (informative) Special con
18、ditions.31 Annex H (informative) Rail cutting off machines 32 Annex I (normative) !Noise reduction .33 Annex J (normative) Noise test code for portable machines and trolleys for construction and maintenance Grade of accuracy 2 and 334 Annex ZA (informative) Relationship between this European Standar
19、d and the Essential Requirements of EU Directive 98/37/EC39 Bibliography40 Licensed Copy: London South Bank University, London South Bank University, Sat Sep 01 03:19:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 13977:2005+A1:2007 (E) 4 Foreword This document (EN 13977:2005+A1:2007) has been pre
20、pared by Technical Committee CEN/TC 256 “Railway applications“, the secretariat of which is held by DIN. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2008 and conflicting national standards shal
21、l be withdrawn at the latest by January 2008. This document includes Amendment 1 approved by CEN on 2007-05-26. This document supersedes EN 13977:2005. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandat
22、e given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the nat
23、ional standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
24、 Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: London South Bank University, London South Bank University, Sat Sep 01 03:19:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 13977:2005+A1:2007 (E) 5 0 Introduction This document is a type
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13977 2005
链接地址:https://www.31doc.com/p-3740864.html