《BS-EN-1509-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-1509-1997.pdf(14页珍藏版)》请在三一文库上搜索。
1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 1509 : 1997 The Eur
2、opean Standard EN 1509 : 1996 has the status of a British Standard ICS 97.220.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Playing field equipment Badminton equipment Functional and safety requirements, test methods Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17
3、08:57:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 1509 : 1997 This British Standard, having been prepared under the direction of the Consumer Products and Services Sector Board, was published under the authority of the Standards Board and comes into effect on 15 March 1997 BSI 1997 The follo
4、wing BSI references relate to the work on this standard: Committee reference SW/14 Draft for comment 94/306177 DC ISBN 0 580 26792 X Amendments issued since publication Amd. No.DateText affected Committees responsible for this British Standard The preparation of this British Standard was entrusted t
5、o Technical Committee SW/14, Gymnasium and sports equipment, upon which the following bodies were represented: All England Womens Hockey Association Association of County Councils British Amateur Gymnastics Association British Athletic Federation British Sports and Allied Industries Federation Centr
6、al Council of Physical Recreation Consumer Policy Council of BSI English Basketball Association Home Office Institute of Trading Standards Administration Physical Education Association Sports Hall and Fitness Equipment Association Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 08:57:09 GMT+0
7、0:00 2006, Uncontrolled Copy, (c) BSI BS EN 1509 : 1997 BSI 1997i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 15093 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 08:57:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii BSI 1997 BS EN 1509 :
8、1997 National foreword This British Standard has been prepared by Technical Committee SW/14 and is the English language version of EN 1509 : 1996 Playing field equipment Badminton equipment Functional and safety requirements, test methods published by the European Committee for Standardization (CEN)
9、. EN 1509 was produced as a result of international discussions in which the United Kingdom took an active part. Cross-references Publication referred toCorresponding British Standard EN 913 : 1996BS EN 913 : 1996 Gymnastic equipment General safety requirements and test methods ISO 2062BS EN ISO 206
10、2 : 1995 Textiles Yarns from packages Determination of single-end breaking force and elongation at break EN 22768-1BS EN 22768 General tolerances Part 1 : 1993 Tolerances for linear and angular dimensions without individual tolerance indications Compliance with a British Standard does not of itself
11、confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 8, an inside back cover and a back cover. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 08:57:09 GMT+00:00 2006, Uncontrolled
12、Copy, (c) BSI CEN European Committee for Standardization Comite Europe en de Normalisation Europa isches Komitee fu r Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 Copyright reserved to CEN members Ref. No. EN 1509 : 1996 E EUROPEAN STANDARDEN 1509 NORME EUROPE ENNE EUROPA IS
13、CHE NORM July 1996 ICS 97.220.30 Descriptors: Sports equipment, sports, sport nets, columns, specifications, materials, design, safety, specifications, technical notices, marking English version Playing field equipment Badminton equipment Functional and safety requirements, test methods Equipements
14、de jeux Equipements de badminton Exigences fonctionelles et de se curite , me thodes dessai Spielfeldgera te Badmintoneinrichtungen Funktionelle und sicherheitstechnische Anforderungen, Pru fverfahren This European Standard was approved by CEN on 1996-06-28. CEN members are bound to comply with the
15、CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or
16、to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versio
17、ns. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 08:57:09 GMT+00:
18、00 2006, Uncontrolled Copy, (c) BSI Page 2 EN 1509 : 1996 BSI 1997 Foreword This European Standard has been prepared by Technical Committee CEN/TC 136, Sports, playground and other recreational equipment, the Secretariat of which is held by DIN. Other types and sizes as those described in this stand
19、ard are permissible provided the safety requirements of this standard are taken into consideration. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 1997, and conflicting national standards
20、 shall be withdrawn at the latest by January 1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, L
21、uxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword2 1Scope3 2Normative references3 3Requirements3 4Safety requirements5 5Test methods5 6Instructions for use5 7Marking5 Annexes A(informative) Examples of badminton equipment types 1 to 3
22、6 B(informative) Example of foundation8 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 08:57:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 3 EN 1509 : 1996 BSI 1997 1 Scope This European Standard specifies the functional requirements (see clause 3) and the safety requirements (see claus
23、e 4) for badminton equipment, excluding rackets and shuttlecocks. This standard is applicable to three types of badminton equipment (see 3.1) which are used indoors. 2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications. These n
24、ormative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated r
25、eferences, the latest edition of the publication referred to applies. EN 913 : 1996Gymnastic equipment General safety requirements and test methods ISO 2062Textiles Yarns from packages Determination of single-end breaking force and elongation at break EN 22768-1General tolerances Part 1: Tolerances
26、for linear and angular dimensions without individual tolerance indications (ISO 27681 : 1989) 3 Requirements 3.1 Classification Badminton equipment shall be classified by the design (types) as shown in table 1. Table 1. Types TypeDescriptionExample 1with ground socketsfigure A.1 2with bases and grou
27、nd fixingsfigure A.2 3free-standingfigure A.3 3.2 Dimensions Badminton equipment shall comply with the dimensions shown in figure 1. For an example of a top of a post to guide the top net line, see annex A. For an example of a foundation, see annex B. Complete badminton equipment type 1 shall have t
28、he following components: a) 2 posts; b) 2 ground sockets; c) 1 net. NOTE. Badminton equipment can also include a tensioning device. For an example of badminton equipment type 1, see annex A. Complete badminton equipment type 2 shall have the following components: a) 2 posts with bases and ground fix
29、ings; b) 1 net. NOTE. Badminton equipment can also include a tensioning device. For an example of badminton equipment type 2, see annex A. Complete badminton equipment type 3 shall have the following components: a) 2 posts with the weighted bases; b) 1 net. NOTE. Badminton equipment can also include
30、 a tensioning device. For an example of badminton equipment type 3, see annex A. 3.3 Material 3.3.1 Posts, bottom structure of type 3 and ground fixings These may be made of steel, light metal or synthetics, provided the requirements of this standard are fulfilled. Light metal shall be non-corrosive
31、 and steel protected against corrosion (e.g. hot-galvanized, powder coated or painted). 3.3.2 Net The net shall be made from synthetic fibres. 3.3.3 Top net line The top net line shall be made from synthetic cord. 3.4 Design 3.4.1 Posts The construction of the posts shall be such that the top net li
32、ne can be supported or guided at a height of 1 550 mm above the side lines for doubles and minimum 1 524 mm at the centre of the court. The posts shall be provided with appropriate fixings for the net. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 08:57:09 GMT+00:00 2006, Uncontrolled Copy,
33、 (c) BSI Page 4 EN 1509 : 1996 BSI 1997 General tolerances: ISO 2768-v. Key 1top net line6 net 2tensioning cord7 post 3top tape8 top net line eye 4side net tape9 top net line tensioning device 5stabilizing bar10 sport surface Dimensions in millimetres. Figure 1. Badminton equipment Licensed Copy: sh
34、effieldun sheffieldun, na, Fri Nov 17 08:57:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 5 EN 1509 : 1996 BSI 1997 1) Marking EN 1509 on or in relation to a product represents a manufacturers declaration of conformity, i.e. claim by or on behalf of the manufacturer that the product meets the r
35、equirements of the standard. The accuracy of the claim is therefore solely the responsibility of the person making the claim. Such a declaration should not be confused with third party certification of conformity, which can also be desirable. The posts shall not move and shall remain vertical and ke
36、ep the net in a position to meet the requirements of the rules for badminton. 3.4.2 Net The height of the net shall be 760 mm. The mesh shall be not less than 15 mm and not more than 20 mm. The breaking force of the net yarn shall be at least 80 N. The top tape, when doubled, shall have a face of (3
37、72) mm and shall be white. When the net is installed for play it shall fill the space between the posts for its entire height. The top net line shall be inserted into the top tape. The ends of the top net line shall be designed so that they do not fray and so that they fit the appropriate tensioning
38、 and/or fixing devices. 3.4.3 Ground sockets All ground sockets shall be resistant to corrosion. 4 Safety requirements 4.1 General General safety requirements shall comply with 5.1 of EN 913 : 1996. 4.2 Tensioning devices The tensioning devices (if any) shall be designed in such a way that they cann
39、ot start without control. They shall not be directed towards the court and they shall be designed so as to induce no risk to the players. 4.3 Other fixings Other fixings (if any) shall not be directed towards the court and they shall be designed so as to induce no risk to the players. 5 Test methods
40、 Requirements of clause 3 for which no particular tests are indicated in the following shall be appropriately verified, e.g. by measurement, visual inspection, tactile or functional testing. Testing of the breaking forces of net yarn is done according to ISO 2062. Testing of safety requirements is d
41、one according to EN 913. Testing of the tensioning devices and other fixings shall be made by visual inspection. 6 Instructions for use All badminton equipment shall be accompanied by instructions for use including at least the following: a) installation details; b) assembly covering method of adjus
42、tment and tensioning device; c) correct fastening of the net; d) maintenance details. 7 Marking Badminton equipment complying with this European Standard shall be marked with the following information: a) the number of this European Standard EN 15091); b) the name, trademark or other means of identi
43、fication of manufacturer, retailer or importer and the year of manufacture. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 08:57:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 6 EN 1509 : 1996 BSI 1997 Annex A (informative) Examples of badminton equipment types 1to 3 Figure A.1 Badminton
44、 equipment type 1Figure A.2 Badminton equipment type 2 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 08:57:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 7 EN 1509 : 1996 BSI 1997 Figure A.3 Badminton equipment type 3Figure A.4 Example of a top of a post to guide the top net line Licens
45、ed Copy: sheffieldun sheffieldun, na, Fri Nov 17 08:57:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 8 EN 1509 : 1996 BSI 1997 Annex B (informative) Example of foundation Key 1 sport surface 2 cover 3 concrete block 4 ground socket Figure B.1 Foundation Licensed Copy: sheffieldun sheffieldun, n
46、a, Fri Nov 17 08:57:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BSI 1997 BS EN 1509 : 1997 List of references See national foreword. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 08:57:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BSI 389 Chiswick High Road London W4 4AL | | | | | | | | |
47、 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent nation
48、al body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the
49、 latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standa
链接地址:https://www.31doc.com/p-3740873.html