BS-EN-15154-2-2006.pdf
《BS-EN-15154-2-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-15154-2-2006.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 15154-2:2006 Emergency safety showers Part 2: Plumbed-in eye wash units The European Standard EN 15154-2:2006 has the status of a British Standard ICS 71.040.10 ? Licensed Copy: London South Bank University, London South Bank University, Sat Dec 30 06:08:26 GMT+00:00 2006, Unc
2、ontrolled Copy, (c) BSI BS EN 15154-2:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2006 BSI 2006 ISBN 0 580 49394 6 National foreword This British Standard was published by BSI. It is the UK implementation of EN 15154-2:200
3、6. The UK participation in its preparation was entrusted to Technical Committee LBI/18, Laboratory furniture and fittings. A list of organizations represented on LBI/18 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contrac
4、t. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Sat Dec 30 06:08:26 GMT+00:00 2
5、006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15154-2 September 2006 ICS 71.040.10 English Version Emergency safety showers - Part 2: Plumbed-in eye wash units Douches de scurit - Partie 2 : Units de lavage dyeux raccordes au rseau deau Sicherheitsnotduschen -
6、Teil 2: Augenduschen mit Wasseranschluss This European Standard was approved by CEN on 19 August 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
7、Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation u
8、nder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
9、Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: ru
10、e de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15154-2:2006: E Licensed Copy: London South Bank University, London South Bank University, Sat Dec 30 06:08:26 GMT+00:00 2006, Uncontrolled Copy,
11、 (c) BSI EN 15154-2:2006 (E) 2 Contents Page Foreword3 Introduction.4 1 Scope 5 2 Normative references5 3 Terms and definitions .5 4 Performance.5 5 Design requirements for installation.6 6 Valve6 7 Outlet Nozzle(s)6 8 Manufacturers information 6 9 Marking.7 Annex A (informative).8 A.1 Water tempera
12、ture.8 A.2 Filter 8 Bibliography9 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 30 06:08:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 15154-2:2006 (E) 3 Foreword This document (EN 15154-2:2006) has been prepared by Technical Committee CEN/TC 332 “Laboratory e
13、quipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2007, and conflicting national standards shall be withdrawn at the latest by March 2007. E
14、N 15154 consists of the following parts, under the general title Emergency safety showers Part 1: Plumbed-in body showers for laboratories Part 2: Plumbed-in eye wash units Part 3: Portable body showers (in preparation) Part 4: Portable eye wash units (in preparation) Part 5: Plumbed-in body showers
15、 for production facilities (in planning) According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hun
16、gary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 30 06:08:26 GMT+00:00 2006, Uncon
17、trolled Copy, (c) BSI EN 15154-2:2006 (E) 4 Introduction Plumbed-in eye wash units are designed and intended to be installed in close range of persons working in a potentially hazardous area. The main purpose of these devices is to immediately deliver flushing fluid in sufficient volume to flush the
18、 eyes following exposure to injurious substances or heat. With this accomplished the injured person can proceed to medical care. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 30 06:08:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 15154-2:2006 (E) 5 1 Scope Thi
19、s document is a product specification, giving performance requirements for emergency safety eye wash units connected to the water supply. It is applicable to plumbed-in eye wash units only. Requirements are given in respect of the performance, installation, adjustment and marking of the eye wash uni
20、ts, as well as installation, operation and maintenance instructions to be given by the manufacturer. NOTE Attention is drawn to national regulations which may apply in respect of the installation and use of eye wash units. 2 Normative references The following referenced documents are indispensable f
21、or the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3864-1, Graphical symbols Safety colours and safety signs Part 1: Design principles for safety sign
22、s in workplaces and public areas 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 emergency safety eye wash unit device specially designed and intended to deliver a flushing fluid to irrigate and flush the eyes and to sufficiently wash away co
23、ntaminants or to dilute them, rendering them harmless 3.2 plumbed-in emergency safety eye wash unit emergency safety eye wash unit that is permanently connected to a continuous water supply 4 Performance 4.1 Flow rate of water Plumbed-in eye wash units shall be designed to deliver a constant flow ra
24、te of minimum 6 l/min at a flow pressure to be specified by the manufacturer and to be measured where the eye wash unit is connected to the water system. Eye wash units shall be capable of delivering this supply for a minimum of 15 min. The velocity of the water shall be low enough to be non-injurio
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 15154 2006
链接地址:https://www.31doc.com/p-3740881.html