《BS-EN-13035-3-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13035-3-2003.pdf(28页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13035-3:2003 Machines and plants for the manufacture, treatment and processing of flat glass Safety requirements Part 3: Cutting machines The European Standard EN 13035-3:2003 has the status of a British Standard ICS 81.100 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Oct
2、 30 05:28:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13035-3:2003 This British Standard, was published under the authority of the Standards Policy and Strategy Committee on 23 July 2003 BSI 23 July 2003 ISBN 0 580 42289 5 National foreword This British Standard is the official English langu
3、age version of EN 13035-3:2003. The UK participation in its preparation was entrusted to Technical Committee MCE/3/13, Glass manufacturing machines safety, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-refere
4、nces The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British
5、Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to
6、 the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside
7、 front cover, the EN title page, pages 2 to 25, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:
8、28:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13035-3 July 2003 ICS 81.100 English version Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines Machines et installation
9、s pour la production, le faonnage et la transformation du verre plat - Exigences de scurit - Partie 3: Machines dcouper Maschinen und Anlagen fr die Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 3: Schneidmaschinen This European Standard was approved by CEN on 23
10、May 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obt
11、ained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Ce
12、ntre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland an
13、d United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13035
14、-3:2003 E Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:28:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13035-3:2003 (E) 2 Contents Page Foreword3 0Introduction4 1Scope 4 2Normative references 4 3Terms and definitions5 4List of significant hazards.6 5Safety requirements and/or protec
15、tive measures8 5.1Common requirements8 5.2Additional special safety requirements for flat glass cutting tables where access is not intended10 5.3Additional special safety requirements for flat glass cutting tables where access is intended.10 6Verification of safety requirements and/or protective mea
16、sures .11 7Information for use 12 Annex A (normative) Perimeter fencing14 Annex B (normative) Photo-electric guarding15 Annex C (normative) Photo-electric guarding with barrier rail 16 Annex D (normative) Fixed distance guard17 Annex E (normative) Photo-electric guarding18 Annex F (normative) Reflex
17、 photo-electric sensors (single light beam scanners) and push-away bars19 Annex G (normative) Stopping operation by safety measures 20 Annex H (informative) Electrical interlocking of movable guards21 Annex I (informative) Danger zones on cutting machines22 Annex J (informative) Synopsis of possible
18、 methods of safeguarding according to 5.2 and 5.3 23 Annex ZA (informative) Relationship of this document with EC Directives24 Bibliography25 Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:28:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13035-3:2003 (E) 3 Foreword This document (EN 13
19、035-3:2003) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorseme
20、nt, at the latest by January 2004, and conflicting national standards shall be withdrawn at the latest by January 2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EC Directive(
21、s). Annexes A to G are normative. Annexes A, I and J are informative. This document is one of a series concerning machinery for the treatment and processing of flat glass. For relationship with EC Directives, see informative annex ZA, which is an integral part of this document. This document include
22、s a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembour
23、g, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:28:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13035-3:2003 (E) 4 0Introduction This document is a type-C standard as stated in EN 1070
24、. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. When provisions of this type-C standard are different from those which are stated in type-A or -B standards, the provisions of this type-C standard take
25、 precedence over the provisions of the other standards for machines that have been designed and built according to the provisions of this type-C standard. 1 Scope 1.1This standard contains the requirements for safety for the design and installation of machines with one movable bridge for cutting of
26、flat glass, which operate by scoring of the glass placed on a horizontal support. This standard covers the transport of the glass on the machine. 1.2This standard deals with all significant hazards, hazardous situations and events relevant to flat glass cutting machines, when they are used as intend
27、ed and under the conditions foreseeable by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks which can arise from these significant hazards. Hazards from noise are not considered to be significant. 1.3This standard does not apply
28、 to flat glass cutting by abrasive cutting or by the use of high pressure liquid or lasers. 1.4This standard does not apply to loading and unloading of flat glass on to or from cutting machines and the breaking out (see prEN 13035-5 and prEN 13035-6). 1.5This standard does not apply to conveyors (se
29、e EN 619) and fans as used as integral parts of the machinery. If there are specific risks that arise in connection with flat glass cutting machines, appropriate measures are specified. 1.6This standard does not apply to cutting of laminated glass (see prEN 13035-7). 1.7This standard does not apply
30、to cutting while the glass is moving. 1.8This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These norm
31、ative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated ref
32、erences the latest edition of the publication referred to applies (including amendments). EN 292-1, Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology. EN 292-2, Safety of machinery - Basic concepts, general principles for design - Part 2: Te
33、chnical principles and specifications. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:28:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13035-3:2003 (E) 5 EN 292-2:1991/A1:1995, Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles and specif
34、ications. EN 294:1992, Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs. EN 349:1993, Safety of machinery - Minimum gaps to avoid crushing of parts of the human body. EN 418:1992, Safety of machinery - Emergency stop equipment, functional aspects - Prin
35、ciples for design. EN 953:1997, Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards. EN 954-1:1996, Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design. EN 999:1998, Safety of machinery - Th
36、e positioning of protective equipment in respect of approach speeds of parts of the human body. EN 1037:1995, Safety of machinery - Prevention of unexpected start-up. EN 1070:1998, Safety of machinery - Terminology. EN 60204-1:1997, Safety of machinery - Electrical equipment of machines - Part 1: Ge
37、neral requirements - (IEC 60204-1:1997 + Corrigendum 1998). EN 61496-1, Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests (IEC 61496-1:1997). prEN 61496-2:1997, Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requi
38、rements for equipment using active opto-electronic protective devices (draft IEC 61496-2:1997). 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 1070:1998 apply. Additional terms and definitions specifically needed for this document are added
39、below: 3.1 cutting tool component for scoring the surface of flat glass 3.2 cutting head mounting assembly for moving the cutting tool vertically 3.3 carriage mounting assembly for moving the cutting head on the axis of the cutting bridge 3.4 (cutting) bridge movable horizontal guide for the carriag
40、e 3.5 cutting table supporting surface on which the flat glass is placed to be scored 3.6 longitudinal sides (of the table) edges (of the table) parallel to the direction of the travel of the cutting bridge Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:28:32 GMT+00:00 2006, Uncontrolled
41、Copy, (c) BSI EN 13035-3:2003 (E) 6 3.7 small sides (of the table) edges (of the table) transverse to the direction of the travel of the cutting bridge 3.8 transport device equipment for the horizontal moving of the flat glass sheets on the cutting table 3.9 air cushion bed of air with a pressure hi
42、gher than atmospheric between the surface of the table and the sheet of glass to lower friction during horizontal transport of the glass 3.10 movable positioning stop mechanical device which can be brought to a place higher than the surface of the table to hold the flat glass in place for cutting an
43、d which can be retracted 3.11 energy chain composition of links supporting and guarding flexible cables and hoses 4 List of significant hazards This clause contains all the significant hazards, hazardous situations and events, as far as they are dealt with in this standard, identified by risk assess
44、ment as significant for this type of machinery and which require action to eliminate or reduce the risk. In annex I (informative) some danger zones on cutting machines are presented graphically. Before using the standard it is important to carry out a general risk assessment of the machine in questi
45、on. NOTEApplication of B-level standards see clause 5. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:28:32 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13035-3:2003 (E) 7 HazardsDanger zone Dangerous item Preventive measures see clause 4.1Mechanical 4.1.1Crushing 4.1.1.1Crushing of the
46、bodybridge/fixed parts outside the table, e.g. control panel 5.1.1; 7.1.8 4.1.1.2Crushing of the armbridge or its drive shaft/table with or without glass for a gap 0,7 m/s and where access by persons is intended during normal operation shall be provided with safety measures in such a way that moveme
47、nts of the bridge with the risk of impact and the risk of crushing and drawing-in of the arm by the bridge or its drive shaft shall be prevented from being started by third persons as long as anyone is in the danger zone. If anyone enters the guarded area, a safety stop shall be triggered automatica
48、lly. This can be done by: a) photo-electric guarding in accordance with annex E (normative) or b) the use of reflex photo-electric sensors (single light beam scanners) against the risk of impact in combination with push-away bars in accordance with annex F (normative) if there is a risk of crushing
49、and drawing-in of the arm. NOTE 2There is no risk of crushing and drawing-in of the arm if the gap between bridge or its drive shaft and the table with glass of the intended thickness is ? 120 mm. 5.3.1Active opto-electronic protective devices shall be in accordance with type 4 of prEN 61496-2:1997. Active photo-electric devices which are automatically checked type 2 of prEN 61496-2:1997 shall only be used on cutting machines where access is required if their checking automatically takes p
链接地址:https://www.31doc.com/p-3740901.html