BS-EN-13271-2002.pdf
《BS-EN-13271-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13271-2002.pdf(18页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13271:2002 Incorporating Corrigendum No. 1 Timber fasteners Characteristic load-carrying capacities and slip-moduli for connector joints The European Standard EN 13271:2001 has the status of a British Standard ICS 91.080.20; 21.060 ? Licensed Copy: sheffieldun sheffieldun, na,
2、 Sun Oct 29 09:44:54 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13271:2002 This British Standard, having been prepared under the direction of the Building and Civil Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committe
3、e on 25 January 2002 BSI 19 December 2003 ISBN 0 580 38919 7 National foreword This British Standard is the official English language version of EN 13271:2001, including corrigendum September 2003. The UK participation in its preparation was entrusted to Technical Committee B/518, Structural timber,
4、 which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the
5、section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applicatio
6、n. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor
7、 related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 14, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when t
8、he document was last issued. Amendments issued since publication Amd. No. DateComments 14849 Corrigendum No. 1 19 December 2003Corrections to 4, 5.4, 6.2 and 6.4 Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:44:54 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPEN
9、NE EUROPISCHE NORM EN 13271 November 2001 ICS 21.060.99; 91.080.20 Incorporating corrigendum September 2003 English version Timber fasteners Characteristic load-carrying cpacities and slip-moduli for connector joints Elments de fixation du bois Valeurs caractristiques de capacit rsistance et du modu
10、le de glissement des assembleurs mcaniques du bois Holzverbindungsmittel Charakteristische Trgfahigkeiten und Verschiebungsmoduln fr Verbindungen mit Dbeln besonderer Bauart This European Standard was approved by CEN on 4 October 2001. CEN members are bound to comply with the CEN/CENELEC Internal Re
11、gulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This E
12、uropean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the nat
13、ional standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES
14、KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13271:2001 E Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:44:54 GMT+00:00 2006, Uncontrolle
15、d Copy, (c) BSI EN 13271:2001 (E) 2 Contents page Foreword3 1 Scope4 2 Normative references4 3 Terms and definitions.4 4 Symbols and abbreviations4 5 Ring and shear plate connector joints5 5.1 Connector types5 5.2 Characteristic load-carrying capacities.5 5.3 Additional reference conditions.6 5.4 Ch
16、aracteristic slip moduli6 6 Toothed-plate connector joints7 6.1 Connector types7 6.2 Characteristic load-carrying capacities.7 6.3 Additional reference conditions.8 6.4 Characteristic slip moduli8 Annex A (normative) Determination of load-carrying capacities of ring and shear plate connector joints1
17、0 Annex B (normative) Determination of load-carrying capacities of toothed-plate connector joints.12 Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:44:54 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13271:2001 (E) 3 Foreword This European Standard has been prepared by Technical Committee
18、 CEN/TC 124, “Structural timber“, the secretariat of which is held by DS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2002, and conflicting national standards shall be withdrawn at the lat
19、est by May 2002. This standard is one of a series of standards for building materials. It was prepared by a working group under the convenorship of DIN, Germany. It is recognized that the characteristic load-carrying capacities of connector units defined in this standard will be interpreted with res
20、pect to design, structural detailing, and control, by reference to ENV 1995-1-1. The annexes A and B are normative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czec
21、h Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:44:54 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13271:2001 (E) 4
22、 1 Scope This European Standard specifies relationships for the determination of load-carrying capacities of connector joints in timber structures and appertaining reference conditions. It also gives recommendations for characteristic values for slip moduli for joints in solid timber (in accordance
23、with EN 338) or glued laminated timber (in accordance with EN 1194). 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are list
24、ed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 33
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13271 2002
链接地址:https://www.31doc.com/p-3740942.html